HyperCoal-derived porous carbons with alkaline hydroxides and carbonate activation for electric double-layer capacitors

Add time:09/04/2019    Source:sciencedirect.com

Electrical double layer capacitors (EDLCs) with HyperCoal-derived activated carbons (ACs) as electrodes are reported in this work. The ACs were prepared by the carbonization of HyperCoal at 600 °C followed by the activation with KOH and NaOH for 2 h between 500 and 800 °C to achieve high total pore volume (TPV) and specific surface area (SSA). The porosity of the ACs was characterized with N2 adsorption at 77 K. The results show that the ACs prepared with KOH and NaOH activations at 700 °C have a SSA of 2594 and 3010 m2 g− 1 and a TPV of 1.36 and 1.77 cm3 g− 1, respectively, leading to the highest specific capacitance of 43.1 and 43.9 F g− 1, respectively, in a two-electrode EDLC cell with 0.5 M tetraethylammonium tetrafluoroborate/propylene carbonate (TEABF4/PC) electrolyte. Activations with CaCO3 and KOH/CaCO3 mixture were also investigated to understand the effect of CaCO3 on the properties of the ACs. CaCO3 significantly inhibited the porosity development during KOH activation and gave ACs with quite low SSA and specific capacitance. The results demonstrated that the alkaline hydroxide activation is an efficient approach to the preparation of ACs from HyperCoal with high-performance for EDLCs.

We also recommend Trading Suppliers and Manufacturers of LEAD CARBONATE BASIC REAGENT (ACS) (cas 1344-36-1). Pls Click Website Link as below: cas 1344-36-1 suppliers

Prev:The structure and solubility of carbonated hydroxyl and chloro lead apatites
Next:Porous polymeric hollow fibers as bifunctional catalysts for CO2 conversion to cyclic carbonates)