Catalytic amination of glycerol with Dimethylamine (cas 124-40-3) over different type ofheteropolyacid/Zr-MCM-41 catalysts
-
Add time:09/29/2019 Source:sciencedirect.com
The effect of different type of heteropolyacid/Zr-MCM-41 catalysts on the catalytic amination of glycerol with Dimethylamine (cas 124-40-3) to produce Dimethylamino-3-propanal was researched. Under the premise of their respective optimum loading amount, the specific surface area, pore volume and pore size of the H6P2W18O62/Zr-MCM-41(Cat-2) were higher than those of the H3PW12O40/Zr-MCM-41(Cat-1). Cat-1 exhibited more total acidity than that of Cat-2, which resulted in the higher glycerol conversion of Cat-1 at the beginning of the reaction, but the coke deposited on Cat-1 was more than that of Cat-2. The amount of Brønsted acid sites and ratio of B/(B + L) on Cat-2 were higher than that of Cat-1. Therefore, the catalytic stability, selectivity and yield of Dimethylamino-3-propanal of Cat-2 were higher than those of Cat-1, which proved that the Brønsted acid sites are good for the catalytic amination of glycerol with dimethylamine to produce Dimethylamino-3-propanal. The leaching ratio of Cat-2 is slightly more than that of Cat-1, because H6P2W18O62 is more hydrophilic than H3PW12O40. However, the stability of Cat-2 is higher than that of Cat-1, therefore, the main reason for deactivation of catalyst is the formation of carbon deposit during this reaction. And the reaction pathway of catalytic amination of glycerol with dimethylamine was proposed. Furthermore, the reaction temperature, GHSV and the molar ratio of dimethylamine/glycerol were optimized on Cat-2 catalyst. Under the optimum reaction conditions: 300 °C, H6P2W18O62 loading of 20 wt%, GHSV of 3 h−1, glycerol aqueous concentration of 10 wt%, dimethylamine aqueous concentration of 30 wt%, molar ratio of dimethylamine/glycerol of 2.5, the glycerol conversion, selectivity and yield of Dimethylamino-3-propanal were 95.6%, 80.8% and 77.2%, respectively.
We also recommend Trading Suppliers and Manufacturers of Dimethylamine (cas 124-40-3). Pls Click Website Link as below: cas 124-40-3 suppliers
Prev:20 - Nanocarbon-supported catalysts for the efficient dehydrogenation of Dimethylamine (cas 124-40-3) borane
Next:Desolvation kinetics of cefamandole Sodium methanolate (cas 124-41-4): the effect of water vapor) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- 20 - Nanocarbon-supported catalysts for the efficient dehydrogenation of Dimethylamine (cas 124-40-3) borane09/28/2019
- Regular ArticleHighly efficient polymer supported monodisperse ruthenium-nickel nanocomposites for dehydrocoupling of Dimethylamine (cas 124-40-3) borane10/01/2019
- Research paperRed-light induced photoreaction of ozone-Dimethylamine (cas 124-40-3) complex; matrix-isolation infrared spectra of Dimethylamine (cas 124-40-3)-N-oxide and N,N-dimethylhydroxylamine09/27/2019
- Research articleKinetic evaluation for rapid degradation of Dimethylamine (cas 124-40-3) enriched with Agromyces and Ochrobactrum sp.09/26/2019
- Efficient adsorption and eco-environmental oxidization of Dimethylamine (cas 124-40-3) in Beta zeolite09/25/2019
- A new highly active polymer supported ruthenium nanocatalyst for the hydrolytic dehydrogenation of Dimethylamine (cas 124-40-3)-borane09/24/2019
- Co-effects of epichlorohydrin-Dimethylamine (cas 124-40-3) and polyferric on humic acid elimination and membrane resistance in hybrid process09/10/2019
- Dimethylamine (cas 124-40-3) substituted bisbenzocoumarin amides with solvatochromic and mechanochromic properties09/09/2019
- Full length articleNanoalumina supported palladium(0) nanoparticle catalyst for releasing H2 from Dimethylamine (cas 124-40-3) borane09/08/2019
-
Health and Chemical more >