Welcome to LookChem.com Sign In | Join Free

Science Details

Home > Chemical Encyclopedia > Science List > Details
  • The effect of a 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal

  • Add time:07/17/2019    Source:sciencedirect.com

    Objectives. The aim of this study was to evaluate the reactions of silanes prior to attaching the composite to titanium and evaluate these silanes as coupling agents. Veneered titanium may be used as a prosthetic material.Methods. Two silane solutions, a mixture of both γ-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane, and tris(3-trimethoxysilylpropyl)isocyanurate were prepared as 2 wt% in two different (95% 2-propanol and 90% acetone) solutions. A control, 2 wt% γ-methacryloxypropyltrimethoxysilane was prepared in both solutions. These six silane solutions were applied onto flat titanium surfaces. The samples (N=250) were divided into two main groups: air-dried (room temperature) and heat cured for 1 h at 110 °C. Sinfony® veneering composite was applied and light-cured on the titanium. The control group was non-silanized. The specimens were assigned to two subgroups: not thermocycled, and thermocycled (5000 cycles, 5–55 °C). Shear bond strength of the composite was tested at a crosshead speed of 1.0 mm min−1. Fresh silane solution hydrolysis, and condensation reaction on titanium surface were monitored by FTIR spectrometry.Results. Dry samples could be successfully tested, while thermocycling after 3700 cycles had gradually de-bonded the composite from the silanized titanium substrate. For dry samples, statistical analysis (ANOVA) showed that solvent and silane significantly affected the shear bond strength. The silane mixture in 2-propanol reacted at room temperature yielded 11.3 MPa (Standard deviation, SD, 3.6 MPa) and on the other hand, tris(3-trimethoxysilylpropyl)isocyanurate in 2-propanol yielded 10.7 MPa (SD 8.0 MPa) and γ-methacryloxypropyltrimethoxysilane 20.4 MPa (SD 12.2 MPa). Non-silanized samples yielded 4.8 MPa (SD 2.1 MPa).Significance. In all solvents used, silanes reacted chemically with the titanium surface and covalent Si–O–Ti– and –Si–O–Si– bonds were evident.

    We also recommend Trading Suppliers and Manufacturers of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0). Pls Click Website Link as below: cas 2530-85-0 suppliers

    Prev:Chain dynamics and stability of the poly(3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0)-co-vinylimidazole)
    Next:Control of the electrical conductivity of composites of antimony doped tin oxide (ATO) nanoparticles and acrylate by grafting of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) (MPS))

  • Back】【Close 】【Print】【Add to favorite
Periodic Table
    Related Products