Surface modification of ultrafine precipitated silica with 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) in carbonization process
-
Add time:07/19/2019 Source:sciencedirect.com
Ultrafine precipitated silica was obtained from Na2SiO3 solutions and simulative lime kiln gas by carbonization process. The surface modification of ultrafine precipitated silica using 3-methacryloxypropyltrmethoxysilane (KH570) at the rear stage of carbonization process was investigated. The optimum synthesis condition of precipitated silica was obtained from the orthogonal tests: reaction temperature of 80 °C, limekiln gas flow rate of 1.2 L/min, sodium silicate concentration of 40 g/L and polyethylene glycol 6000 (PEG6000) concentration of 4 g/L. The modification degree and basic physicochemical properties of precipitated silica were analyzed by Fourier transformation infrared spectroscopy (FT-IR), thermogravimetry (TG) and X-ray diffraction (XRD). The result demonstrates that KH570 is mainly grafted to the silica surface by chemical bond rather than physical adsorption. Average activation index of precipitated silica is nearly 90% for KH570 dosage of 1%. After modification, the BET (Brunauer–Emmett–Teller) specific surface area and DBP (dimethyl terephthalate) absorption value of precipitated silica become smaller, while the average pore diameter becomes larger.
We also recommend Trading Suppliers and Manufacturers of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0). Pls Click Website Link as below: cas 2530-85-0 suppliers
Prev:Control of the electrical conductivity of composites of antimony doped tin oxide (ATO) nanoparticles and acrylate by grafting of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) (MPS)
Next:Effect of drying time of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) on the shear bond strength of a composite resin to silica-coated base/noble alloys) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Effect of drying time of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) on the shear bond strength of a composite resin to silica-coated base/noble alloys07/21/2019
- Control of the electrical conductivity of composites of antimony doped tin oxide (ATO) nanoparticles and acrylate by grafting of 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) (MPS)07/18/2019
- The effect of a 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal07/17/2019
- Chain dynamics and stability of the poly(3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0)-co-vinylimidazole)07/16/2019
- Study of the film formation and mechanical properties of the latexes obtained by miniemulsion co-polymerization of butyl acrylate, methyl acrylate and 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0)07/15/2019
- Corrosion protection of AZ31 magnesium alloy treated with La3+ modified 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) conversion film07/14/2019
- Surface modification of oxidic nanoparticles using 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0)07/13/2019
- Preparation of silica-poly(2-hydroxyethyl methacrylate) hybrids modified with 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0)07/12/2019
- Comparative effects of untreated and 3-Methacryloxypropyltrimethoxysilane (cas 2530-85-0) treated ZnO nanoparticle reinforcement on properties of polylactide-based nanocomposite films07/11/2019