Basic Information | Post buying leads | Suppliers | Cas Database |
Conditions | Yield |
---|---|
In melt Kinetics; placing of mixt. of Ti with SnF2 (molar ratio SnF2:Ti=4.04) in Fluoroplast-4 ampule, closing by screwed stopper, exposition for 1.00 h at 230°C; various product ratio yields for various conditions; cooling, stirring up in water, collection, drying; | A 13.8% B n/a |
Conditions | Yield |
---|---|
In hydrogen fluoride reaction of ClF3 with Ti in HF-suspension at -78°C;; | |
In hydrogen fluoride HF (liquid); reaction of ClF3 with Ti in HF-suspension at -78°C;; |
Conditions | Yield |
---|---|
With hydrogen fluoride In water byproducts: H2; at room temp.; | |
With fluorine gentle heating; | |
With hydrogen fluoride byproducts: H2; at red heat; |
Conditions | Yield |
---|---|
In hydrogen fluoride | |
100-120°C; | |
HF free of water;; |
titanium(III) fluoride
hydrogen fluoride
A
hydrogen
B
titanium(IV) fluoride
Conditions | Yield |
---|---|
In water Kinetics; |
Conditions | Yield |
---|---|
Kinetics; 220 to 400°C, 0.2 to 1 atm HF; |
Conditions | Yield |
---|---|
Kinetics; byproducts: oxide, fluorides; => 200°C; | |
With sulfuric acid In water | 0% |
Conditions | Yield |
---|---|
byproducts: HCl; vigorous reaction; | |
byproducts: HCl; vigorous reaction; |
Conditions | Yield |
---|---|
With boron trifluoride at 500°C; | |
With BF3 at 500°C; |
Conditions | Yield |
---|---|
In neat (no solvent) reaction at 700-750°C;; |
The cas register number of Titanium tetrafluoride is 7783-63-3. It also can be called as tetrafluorotitanium and the Systematic name about this chemical is titanium(+2) cation tetrafluoride. And it Classification Code are Cariostatic agents and Protective Agents.
When you are using this chemical, please be cautious about it as the following:
It is harmful by inhalation, in contact with skin and if swallowed. And it may be causes burns. If it is in case of contact with eyes, rinse immediately with plenty of water and seek medical advice and must take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of soap-suds. So people must wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
People can use the following data to convert to the molecule structure.
1.SMILES: [Ti+2].[Ti+2].[F-].[F-].[F-].[F-]
2.InChI: InChI=1/4FH.2Ti/h4*1H;;/q;;;;2*+2/p-4
3.InChIKey: VHIAGHNQBFWVPM-XBHQNQODAO
4.Std. InChI: InChI=1S/4FH.2Ti/h4*1H;;/q;;;;2*+2/p-4
5.Std. InChIKey: VHIAGHNQBFWVPM-UHFFFAOYSA-J