Direct Dehydrogenation of n-Butane Over Pt/Sn/Al O
Lee et al.
2
3
yield for TDP was obtained by multiplying conversion of
n-butane and selectivity for TDP. As a result, maximum
catalytic performance in terms of yield for TDP could be
obtained over Pt/Sn/Al O -700 catalyst (Figs. 5 and 6).
5. G. Raju, B. M. Reddy, B. Abhishek, Y.-H. Mo, and S.-E. Park, Appl.
Catal. A: Gen. 423, 168 (2012).
6. M. Setnicka, R. Bulanek, L. Capek, and P. Cicmanec, J. Mol. Catal.
A: Chem. 344, 1 (2011).
2
3
7. X. Liu, B. Frank, W. Zhang, T. P. Cotter, R. Schlogl, and D. S. Su,
Angew. Chem. Int. Ed. 50, 3318 (2011).
8
9
. Z. Nawaz and F. Wei, Ind. Eng. Chem. Res. 52, 346 (2013).
. J. M. McNamara, S. D. Jackson, and D. Lennon, Catal. Today
81, 583 (2003).
4
. CONCLUSIONS
Al O -X supports prepared by a sol–gel method were cal-
2
3
cined at various temperatures, and Pt/Sn/Al O -X cata-
10. S. A. Bocanegra, A. A. Castro, A. Guerrero-Ruiz, O. A. Scelza, and
S. R. de Miguel, Chem. Eng. J. 118, 161 (2006).
2
3
lysts were then prepared by a sequential impregnation
method for use in the direct dehydrogenation of n-butane.
The effect of calcination temperature of alumina on
the physicochemical properties and catalytic activities of
Pt/Sn/Al O -X catalysts was investigated. It was revealed
11. S. Bocanegra, A. Ballarini, P. Zgolicz, O. Scelza, and S. de Miguel,
Catal. Today 143, 334 (2009).
12. S. A. Bocanegra, A. A. Castro, O. A. Scelza, and S. R. de Miguel,
Appl. Catal. A: Gen. 333, 49 (2007).
13. M. M. Bhasin, J. H. McCain, B. V. Vora, T. Imai, and P. R. Pujado,
Appl. Catal. A: Gen. 221, 397 (2001).
2
3
that platinum surface area and acidity of Pt/Sn/Al O -X
2
3
14. S. D. Jackson and S. Rugmini, J. Catal. 251, 59 (2007).
catalysts were strongly influenced by the calcination tem-
perature of alumina. Platinum surface area and acidity
15. Y. Xu, J. Lu, M. Zhong, and J. Wang, J. Nat. Gas Chem. 18, 88
(2009).
of Pt/Sn/Al O -X catalysts decreased with increasing cal-
2
3
16. P. Burtin, J. P. Brunelle, M. Pijolat, and M. Soustelle, Appl. Catal.
34, 225 (1987).
cination temperature of alumina. It was also revealed
17. P. Burtin, J. P. Brunelle, M. Pijolat, and M. Soustelle, Appl. Catal.
that catalytic performance of Pt/Sn/Al O -X catalysts was
2
3
34, 239 (1987).
strongly influenced by platinum surface area and acid-
ity of the catalyst. Conversion of n-butane increased with
increasing platinum surface area of the catalyst, while
selectivity for TDP decreased with increasing acidity of
the catalyst. Among the catalysts tested, Pt/Sn/Al O -700
1
1
8. R.-S. Zhou and R. L. Snyder, Acta. Crystallogr. B 47, 617 (1991).
9. T. F. Baumann, A. E. Gash, S. C. Chinn, A. M. Sawvel, R. S.
Maxwell, and J. H. Satcher, Chem. Mater. 17, 395 (2005).
20. Y. Bang, J. G. Seo, M. H. Youn, and I. K. Song, Int. J. Hydrogen
Energy 37, 1436 (2012).
2
3
21. K. S. W. Sing, D. H. Everett, R. A. W. Haul, L. Moscou, R. A.
catalyst showed the best catalytic performance in terms
of yield for TDP. Thus, an optimal calcination tempera-
Pierotti, J. Rouquerol, and T. Siemieniewska, Pure. Appl. Chem.
57, 603 (1985).
ture of alumina was re qD uei rl iev de rf eo dr mb ya xI inmg ue mn t ap rt oo d: uSc tt ai ot en oU fniversity of New York at Binghamton
2
2. Q. Liu, A. Wang, X. Wang, and T. Zhang, Microporous. Mesoporous.
IP: 93.179.89.8 On: Mon, 26 Sep 2016 14:09:01
n-butenes and 1,3-butadiene.
Mater. 92, 10 (2006).
Copyright: American Scientific Publishers
2
2
2
3. K. V. R. Chary, P. V. R. Rao, and V. V. Rao, Catal. Commun. 9, 886
(2008).
Acknowledgments: This work was supported by the
Global Frontier R&D Program on Center for Multiscale
Energy System funded by the National Research Founda-
tion under the Ministry of Science, ICT & Future Planning,
Korea (20110031575).
4. U. Janosovits, G. Ziegler, U. Scharf, and A. Wokaun, J. Non-Cryst.
Solids 210, 1 (1997).
5. Y. Zhang, Y. Zhou, X. Sheng, L. Wan, Y. Li, Y. Xiao, B. Yu, and
Z. Zeng, Fuel Process. Technol. 104, 23 (2012).
26. B. K. Vu, M. B. Song, I. Y. Ahn, Y.-W. Suh, D. J. Suh, W.-L.
Kim, H.-L. Koh, Y. G. Choi, and E. W. Shin, Catal. Today 164, 214
(2011).
References and Notes
27. Y. Zhang, Y. Zhou, L. Wan, M. Xue, Y. Duan, and X. Liu, Fuel
Process. Technol. 92, 1632 (2011).
1
. L. M. Madeira and M. F. Portela, Catal. Rev. Sci. Eng. 44, 247
(
2002).
28. L. S. Carvalho, C. L. Pieck, M. C. Rangel, N. S. Figoli, J. M. Grau,
P. Reyes, and J. M. Parera, Appl. Catal. A: Gen. 269, 91 (2004).
29. Y. Zhang, Y. Zhou, Y. Li, Y. Wang, Y. Xu, and P. Wu, Catal. Com-
mun. 8, 1009 (2007).
30. H. Seo, J. K. Lee, U. G. Hong, G. Park, Y. Yoo, J. Lee, H. Chang,
and I. K. Song, Catal. Commun. 47, 22 (2014).
2
. J. C. Jung, H. Lee, H. Kim, Y.-M. Chung, T. J. Kim, S. J. Lee, S.-H.
Oh, Y. S. Kim, and I. K. Song, J. Mol. Catal. A: Chem. 271, 261
(
2007).
. S. Veldurthi, C.-H. Shin, O.-S. Joo, and K.-D. Jung, Catal. Today
85, 88 (2012).
3
4
1
. A. D. Ballarini, P. Zgolicz, I. M. J. Vilella, S. R. de Miguel, A. A.
Castro, and O. A. Scelza, Appl. Catal. A: Gen. 381, 83 (2010).
31. S. Zhang, Y. Zhou, Y. Zhang, and L. Huang, Catal. Lett. 135, 76
(2010).
Received: 8 July 2015. Accepted: 10 March 2016.
10822
J. Nanosci. Nanotechnol. 16, 10816–10822, 2016