Products Categories
| CAS No.: | 75-24-1 |
|---|---|
| Name: | Trimethylaluminium |
| Molecular Structure: | |
|
|
|
| Formula: | C3H9Al |
| Molecular Weight: | 72.086 |
| Synonyms: | Alane,trimethyl-;Trimethylalane;Trimethylaluminum (Al(CH3)3); |
| EINECS: | 200-853-0 |
| Density: | 0.81 g/mL at 25 °C |
| Melting Point: | 15 °C |
| Boiling Point: | 126 °C |
| Flash Point: | 40 °F |
| Solubility: | reacts with water |
| Appearance: | clear colorless solution |
| Hazard Symbols: |
 F, C, N
|
| Risk Codes: | 11-14-17-34-50/53-65-67-14/15-63-48/20-51/53-20-62 |
| Safety: | 26-36/37/39-45-61-62-6A-43A-24/25-16-43-60-33-25-24 |
| Transport Information: | UN 3399 4.3/PG 1 |
| PSA: | 0.00000 |
| LogP: | 1.75140 |
- 81281-59-67-Benzylideneaminotheophylline
- 82993-81-5D-threo-Ritalinic acid hydrochloride
- 852475-26-4MC1568
- 958254-66-51H-Imidazo[4,5-b]pyridine-2-carboxaldehyde, 1-methyl-, hydrochloride
- 99170-93-1N-Methyl-2-oxazolamine
- 914458-26-7[5-(2-fluorophenyl)-1-pentyl-1H-pyrrol-3-yl]-1-naphthalenyl-Methanone
- 894852-01-87-BROMO-2,2-DIMETHYL-2H-PYRIDO[3,2-B][1,4]OXAZIN-3(4H)-ONE
- 90221-55-92-bromo-5-methylbenzaldehyde
- 885590-99-82,3-DIFLUORO-4-IODOBENZALDEHYDE
- 97730-31-9(S)-4'-(2-Methylbutyl)Biphenyl-4-Carbonitrile
| Conditions | Yield |
|---|---|
| With methylmagnesium bromide In not given react. of AlCl3 with MeMgBr; | 99% |
| Conditions | Yield |
|---|---|
| With methylene chloride; sodium at 40 - 50℃; under 375.038 Torr; Inert atmosphere; Flow reactor; | A 93.7% B 96.8% |
| Conditions | Yield |
|---|---|
| With iodine; methyl iodide In ethanol Sonication; N2; CH3I, I2 and Al introduced in a condenser with C2H5OH at -20°C, ultrasonic acceleration at room temp. for 2 h, Et3Al (ratio MeI/Et3Al = 1.50) dropped into soln. within 10 min, sonication for 30 min; distilled (vac.); | A 86% B 95% |
- 66415-27-8
2,4,6-tri-tert-butylbenzoic acid
B
- 75-24-1
trimethylaluminum
| Conditions | Yield |
|---|---|
| In hexane; toluene byproducts: CH4; in a glovebox, Nd-contg. compd. (0.50 mmol) was dissolved in hexane, anda toluene suspn. of carboxylic acid (0.50 mmol) was slowly added; stirr ing at ambient temp. for 18 h; the solvent was removed in vac.; extn. in toluene; the complex was washed with hexane and dried for several hours; elem. anal.; | A 94% B n/a |
- 97-93-8
triethylaluminum
- 7429-90-5
aluminium
A
- 75-24-1
trimethylaluminum
B
- 2938-72-9
dimethyl aluminum iodide
C
- 2938-73-0
ethyl aluminium iodide
| Conditions | Yield |
|---|---|
| With iodine; methyl iodide In ethanol Sonication; N2, CH3I, I2 and Al introduced in a condenser with C2H5OH at -20°C, ultrasonic acceleration at room temp. for 2 h, Et3Al (ratio MeI/Et3Al = 12.00) dropped into soln. within 10 min, sonicated for 30 min; distilled (vac.); | A 62.5% B 22.5% C 93% |
- 66415-27-8
2,4,6-tri-tert-butylbenzoic acid
B
- 75-24-1
trimethylaluminum
| Conditions | Yield |
|---|---|
| In hexane; toluene byproducts: CH4; in a glovebox, La-contg. compd. (0.50 mmol) was dissolved in hexane, anda toluene suspn. of carboxylic acid (0.50 mmol) was slowly added; stirr ing at ambient temp. for 18 h; the solvent was removed in vac.; extn. in toluene; the complex was washed with hexane and dried for several hours; elem. anal.; | A 93% B n/a |
| Conditions | Yield |
|---|---|
| In hexane byproducts: CH4; Schlenk technique; diene (1 equiv.) in hexane was added with stirring tosoln. of La complex in hexane; mixt. was stirred for 5 min; solvent removed (vac.); dried (vac.); elem. anal.; | A 93% B n/a |
| Conditions | Yield |
|---|---|
| In hexane byproducts: CH4; Schlenk technique; diene (1 equiv.) in hexane was added with stirring tosoln. of Nd complex in hexane; mixt. was stirred for 5 min; solvent removed (vac.); dried (vac.); elem. anal.; | A 91% B n/a |
| Conditions | Yield |
|---|---|
| In hexane byproducts: CH4; Schlenk technique; diene (1 equiv.) in hexane was added with stirring tosoln. of Lu complex in hexane; mixt. was stirred for 5 min; solvent removed (vac.); dried (vac.); elem. anal.; | A 91% B n/a |
- 66415-27-8
2,4,6-tri-tert-butylbenzoic acid
B
- 75-24-1
trimethylaluminum
| Conditions | Yield |
|---|---|
| In hexane; toluene byproducts: CH4; in a glovebox, Y-contg. compd. (0.50 mmol) was dissolved in hexane, and a toluene suspn. of carboxylic acid (0.50 mmol) was slowly added; stirring at ambient temp. for 18 h; the solvent was removed in vac.; extn. in toluene; the complex was washed with hexane and dried for several hours; elem. anal.; | A 87% B n/a |
- 767340-03-4(2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro-[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine
- 145-42-6Ethanesulfonic acid, 2-[[(3a,5b,7a,12a)-3,7,12-trihydroxy-24-oxocholan-24-yl]amino]-,monosodium salt
- 495-76-1Piperonyl alcohol
- 57469-78-0Lysyl-ketoprofen
- 106264-79-3Dimethylthio-toluenediamine
- 59198-70-8Pregna-1,4-diene-3,20-dione,6,9-difluoro-11-hydroxy-16-methyl-21-[(1-oxopentyl)oxy]-, (6a,11b,16a)-
- 1464-42-2Butanoic acid,2-amino-4-(methylseleno)-
- 9010-85-91,3-Butadiene, 2-methyl-, polymer with 2-methyl-1-propene
- 104987-11-3Tacrolimus
- 141-53-7Sodium formate
- 8001-54-5Quaternary ammonium compounds, alkylbenzyldimethyl, chlorides
- 9003-39-8Povidone
- 10161-34-9Trenbolone acetate
- 402957-28-2Telaprevir
- 68-19-9Cyanocobalamin
- Total:23 Page 1 of 1 1
What can I do for you?
Get Best Price
Specification
The IUPAC name of this chemical is Trimethylaluminum. With the CAS registry number 75-24-1 and EINECS registry number 200-853-0, it is also named as Aluminum, trimethyl-. In addition, the molecular formula is C3H9Al and the molecular weight is 72.09. It is a kind of clear colorless solution and belongs to the classes of Organometallics; Al (Alminum) Compounds; Alkyl Metals; Classes of Metal Compounds; Grignard Reagents & Alkyl Metals; Synthetic Organic Chemistry; Typical Metal Compounds; Chemical Synthesis; Organoaluminum; Organometallic Reagents.
Preparation and uses of Trimethylaluminum: it can be prepared by dimethylmercury and aluminium with heating. Also it can be prepared by trihalidetrimethyldialuminium and aluminium. And it is mainly used for the production of methylaluminoxane, an activator for Ziegler-Natta catalysts for olefin polymerisation. In addition, it is used as the raw materials for MOCVD process and used in semiconductor fabrication to grow thin film. And it can react with 3-methyl-cyclohex-2-enone to get 3,3-dimethyl-cyclohexanone. This reaction will need reagents CuBr and Me3SiCl and solvent tetrahydrofuran. The reaction time is 1 hour at reaction temperature of 0 °C. The yield is about 97%.
When you are using this chemical, please be cautious about it as the following:
It is highly flammable and spontaneously flammable in air. And it can cause burns and react violently with water, liberating extremely flammable gases. In addition, it is very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. It may cause lung damage if swallowed. Besides, it may risk of impaired fertility and is harmful to the unborn child. During using it, wear suitable protective clothing, gloves and eye/face protection and avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. And in case of accident or if you feel unwell, seek medical advice immediately (show label where possible). If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Moreover, keep away from sources of ignition-No smoking. This material and its container must be disposed of as hazardous waste. Take precautionary measures against static discharges. In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk).
You can still convert the following datas into molecular structure:
(1)SMILES: C[Al](C)C
(2)InChI: InChI=1/3CH3.Al/h3*1H3;/rC3H9Al/c1-4(2)3/h1-3H3
(3)InChIKey: JLTRXTDYQLMHGR-MZZUXTGEA