1120-16-7Relevant articles and documents
Copper(II) acetate-catalysed conversion of aldoximes to amides under mild conditions
Ma, Xiaoyun,Lu, Ming
, p. 594 - 596 (2016)
A mild method for the metal-catalysed conversion of aldoximes to amides has been achieved by the combined use of copper(II) acetate and MeCN in EtOH under reflux. The presence of a catalytic amount of MeCN (0.05 equiv.) accelerated the reaction and improved the yield. Aryl, heteroaryl and alkyl aldoximes were transformed into the corresponding amides in moderate to good yield. 2-Furyl and 2-Thiophenyl aldoximes, which possess a heteroatom lone pair positioned ortho to the oximido group, showed enhanced reactivity, and the corresponding amides were obtained in excellent yield.
One-Step Synthesis of Nitriles from Acids, Esters and Amides Using DIBAL-H and Ammonium Chloride
Wojtkielewicz, Agnieszka,?otowski, Zenon,Morzycki, Jacek W.
, p. 2288 - 2292 (2015)
A convenient, one-step procedure is presented for the conversion of carboxylic acids or their derivatives (esters, lactones, amides) to nitriles with an aminoalane reagent prepared from diisobutylaluminum hydride (DIBAL-H) and ammonium chloride.
A Molecular Iron-Based System for Divergent Bond Activation: Controlling the Reactivity of Aldehydes
Chatterjee, Basujit,Jena, Soumyashree,Chugh, Vishal,Weyhermüller, Thomas,Werlé, Christophe
, p. 7176 - 7185 (2021/06/30)
The direct synthesis of amides and nitriles from readily available aldehyde precursors provides access to functional groups of major synthetic utility. To date, most reliable catalytic methods have typically been optimized to supply one product exclusively. Herein, we describe an approach centered on an operationally simple iron-based system that, depending on the reaction conditions, selectively addresses either the C=O or C-H bond of aldehydes. This way, two divergent reaction pathways can be opened to furnish both products in high yields and selectivities under mild reaction conditions. The catalyst system takes advantage of iron's dual reactivity capable of acting as (1) a Lewis acid and (2) a nitrene transfer platform to govern the aldehyde building block. The present transformation offers a rare control over the selectivity on the basis of the iron system's ionic nature. This approach expands the repertoire of protocols for amide and nitrile synthesis and shows that fine adjustments of the catalyst system's molecular environment can supply control over bond activation processes, thus providing easy access to various products from primary building blocks.
One-pot reductive amination of carboxylic acids: a sustainable method for primary amine synthesis
Coeck, Robin,De Vos, Dirk E.
supporting information, p. 5105 - 5114 (2020/08/25)
The reductive amination of carboxylic acids is a very green, efficient and sustainable method for the production of (bio-based) amines. However, with current technology, this reaction requires two to three reaction steps. Here, we report the first (heterogeneous) catalytic system for the one-pot reductive amination of carboxylic acids to amines, with solely H2 and NH3 as the reactants. This reaction can be performed with relatively cheap ruthenium-tungsten bimetallic catalysts in the green and benign solvent cyclopentyl methyl ether (CPME). Selectivities of up to 99% for the primary amine could be achieved at high conversions. Additionally, the catalyst is recyclable and tolerant for common impurities such as water and cations (e.g. sodium carboxylate).
Synthesis of: N-acyl amide natural products using a versatile adenylating biocatalyst
Marchetti, Piera M.,Richardson, Shona M.,Kariem, Noor M.,Campopiano, Dominic J.
supporting information, p. 1192 - 1196 (2019/07/31)
Natural products are secondary metabolites produced by many different organisms such as bacteria, fungi and plants. These biologically active molecules have been widely exploited for clinical application. Here we investigate TamA, a key enzyme from the biosynthetic pathway of tambjamine YP1, an acylated bipyrrole that is produced by the marine microorganism Pseudoalteromonas tunicata. TamA is a didomain enzyme composed of a catalytic adenylation (ANL) and an acyl carrier protein (ACP) domain that together control the fatty acid chain length of the YP1. Here we show that the TamA ANL domain alone can be used to generate a range of acyl adenylates that can be captured by a number of amines thus leading to the production of a series of fatty N-acyl amides. We exploit this biocatalytic promiscuity to produce the recently discovered class of N-acyl histidine amide natural products from Legionella pneumophila.
Selective Transformations of Triglycerides into Fatty Amines, Amides, and Nitriles by using Heterogeneous Catalysis
Jamil, Md. A. R.,Siddiki, S. M. A. Hakim,Touchy, Abeda Sultana,Rashed, Md. Nurnobi,Poly, Sharmin Sultana,Jing, Yuan,Ting, Kah Wei,Toyao, Takashi,Maeno, Zen,Shimizu, Ken-ichi
, p. 3115 - 3125 (2019/04/26)
The use of triglycerides as an important class of biomass is an effective strategy to realize a more sustainable society. Herein, three heterogeneous catalytic methods are reported for the selective one-pot transformation of triglycerides into value-added chemicals: i) the reductive amination of triglycerides into fatty amines with aqueous NH3 under H2 promoted by ZrO2-supported Pt clusters; ii) the amidation of triglycerides under gaseous NH3 catalyzed by high-silica H-beta (Hβ) zeolite at 180 °C; iii) the Hβ-promoted synthesis of nitriles from triglycerides and gaseous NH3 at 220 °C. These methods are widely applicable to the transformation of various triglycerides (C4–C18 skeletons) into the corresponding amines, amides, and nitriles.
Corresponding amine nitrile and method of manufacturing thereof
-
Paragraph 0138; 0139; 0140; 0141; 0142, (2018/05/07)
The invention relates to a manufacturing method of nitrile. Compared with the prior art, the manufacturing method has the characteristics of significantly reduced using amount of an ammonia source, low environmental pressure, low energy consumption, low production cost, high purity and yield of a nitrile product and the like, and nitrile with a more complex structure can be obtained. The invention also relates to a method for manufacturing corresponding amine from nitrile.
Metal-Free Thermal Activation of Molecular Oxygen Enabled Direct α-CH2-Oxygenation of Free Amines
Ghosh, Santanu,Jana, Chandan K.
, p. 260 - 266 (2018/02/19)
Direct oxidation of α-CH2 group of free amines is hard to achieve due to the higher reactivity of amine moiety. Therefore, oxidation of amines involves the use of sophisticated metallic reagents/catalyst in the presence or absence of hazardous oxidants under sensitive reaction conditions. A novel method for direct C-H oxygenation of aliphatic amines through a metal-free activation of molecular oxygen has been developed. Both activated and unactivated free amines were oxygenated efficiently to provide a wide variety of amides (primary, secondary) and lactams under operationally simple conditions without the aid of metallic reagents and toxic oxidants. The method has been applied to the synthesis of highly functionalized amide-containing medicinal drugs, such as O-Me-alibendol and -buclosamide.
Selective Cleavage of Inert Aryl C-N Bonds in N-Aryl Amides
Zhang, Zhiguo,Zheng, Dan,Wan, Yameng,Zhang, Guisheng,Bi, Jingjing,Liu, Qingfeng,Liu, Tongxin,Shi, Lei
, p. 1369 - 1376 (2018/02/09)
A highly selective, IBX-promoted reaction has been developed for the oxidative cleavage of inert C(aryl)-N bonds on secondary amides while leaving the C(carbonyl)-N bond unchanged. This metal-free reaction proceeds under mild conditions (HFIP/H2O, 25 °C), providing facile access to various useful primary amides, some of which would be otherwise unattainable using conventional aminolysis and hydrolysis approaches.
NOVEL LIPIDS AND LIPID NANOPARTICLE FORMULATIONS FOR DELIVERY OF NUCLEIC ACIDS
-
, (2016/05/02)
Compounds are provided having the following structure: (I) or a pharmaceutically acceptable salt, tautomer or stereoisomer thereof, wherein R1a, R1b, R2a, R2b, R3a, R3b, R4a, R4b, R5, R6, R7, R8, R9, L1, L2, a, b, c, d and e are as defined herein. Use of the compounds as a component of lipid nanoparticle formulations for delivery of a therapeutic agent, compositions comprising the compounds and methods for their use and preparation are also provided.
