1794-86-1

Usage

Chemical Properties

Phosgene oxime (military designation CX) is a non-combustible urticant (nettle agent, blister agent) with a short (seconds to minutes) latency period. CX is a colorless, low-melting point (crystalline, white powder) solid or as a liquid (liquid above 39C; solid below 35C). On hot days (or at body temperature) it can appear as a yellowishbrown liquid. It has a high vapor pressure (the vapor pressure of the solid is high enough to produce symptoms), slowly decomposes at normal temperatures. It has an intense, disagreeable,penetrating, and violently irritating, peppery odor. Odor detectable at less than 0.3 ppm.

Uses

There are no commercial or beneficial uses of phosgene oxime. It was developed and produced solely as a chemical warfare agent, but has never been used on the battlefield.

General Description

Colorless liquid, odorless to fruity.

Reactivity Profile

dichloroformoxine is an oxime. Chemically similar to, but more reactive than an amide. Incompatible with strong acids and bases, and especially incompatible with strong reducing agents such as hydrides. Also incompatible with strongly oxidizing acids, peroxides, and hydroperoxides.

Health Hazard

Median lethal dose (mg-min/m3): 3200 (inhaled). Median incapacitating dose: Very low. Eye/skin toxicity: Powerful irritant to eyes and nose; liquid corrosive to skin. Rate of action: Immediate effects on contact. Physiological action: Violently irritates mucous membranes, eyes and nose; forms wheals rapidly. (ANSER)

Potential Exposure

There’s no industrial use for Phosgene oxime (CX) and because of its extreme instability, the pure material is not likely to be used in military operations. CX is especially dangerous when mixed with other chemicals such as nerve agents. It burns away the skin making it more permeable to any other “added” agents. No other chemical agent is capable of producing immediate extreme pain followed by rapid local tissue death (necrosis). Post World War II studies indicate that concentrations below 8% cause no or inconsistent effects.

Environmental Fate

Phosgene oxime does not accumulate in the soil since both phosgene oxime and the parent compound of phosgene have been shown to be highly unstable in the environment. Small amounts which may be present can vaporize into the air or be degraded by soil bacteria. Once in vapor form, phosgene oxime remains in vapor form and will be inactivated by compounds in the atmosphere or broken down by bacteria. There is no evidence that phosgene oxime will accumulate in groundwater. Phosgene oxime is fairly soluble in water and if exposed to soil moisture may rapidly decompose to CO2, HCl, and hydroxy amine hydrochloride.

Shipping

UN2811 (solid)/UN2810 (liquid) Toxic solids or liquids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1Poisonous materials, Technical Name Required. Military driver shall be given full and complete information regarding shipment and conditions in case of emergency. AR 50-6 deals specifically with the shipment of chemical agents. Shipments of agent will be escorted in accordance with AR 740-32.

Toxicity evaluation

The molecular mechanism of phosgene oxime toxicity is unknown. Phosgene oxime is the least well studied of all vesicant/urticant compounds but possible mechanisms may involve the actions of (1) necrotizing effects of chlorine, (2) direct toxic effects of oxime, and/or (3) the actions of carbonyl groups on the target tissue. One hypothesis is that phosgene oxime toxicity can be broken down into two mechanisms. First is a direct mechanism which will involve direct enzymatic inactivation, cell death, corrosive injury, and rapid destruction of the tissue that phosgene oxime has contacted. Secondarily, there are a series of indirect mechanisms that may increase tissue injury. There is activation of alveolar macrophages, recruitment of neutrophils to the damage site, release of hydrogen peroxide, and then delayed disuse injury following the edema associated with phosgene oxime exposure.

Incompatibilities

Phosgene oxime (CX) is among the most important halogenated oximes. CX reacts with water, sweat, and heat, forming hydrochloric acid. CX may be an oxidizer, and it may ignite combustibles, e.g., wood, paper, oil, or clothing). CX is incompatible with strong acids and bases; hydrides and other strong reducing agents such as hydrides; strong oxidizing acids, peroxides, and hydroperoxides. Not hydrolyzed by dilute acids; reacts violently in basic solutions forming carbon dioxide, hydrogen chloride, and hydroxylamine. Hydrolysis products include HCl and methylarsenic oxide. CX quickly penetrates rubber and clothing. Traces of many metals cause it to decompose; however, it corrodes most metals. Oximes are chemically similar to, but more reactive than amides. Incompatible with strong acids and bases, and especially incompatible with strong reducing agents such as hydrideds and active metals. Also incompatible with strongly oxidizing acids, peroxides, and hydroperoxides. CX decomposes when in contact with many metals; it is corrosive to most metals, and contact with metals may evolve flammable hydrogen gas.

Waste Disposal

Seek expert advice from armed services (see Reference section), Center for Disease Control headquarters in Atlanta, Ga.

InChI:InChI=1/CHCl2NO/c2-1(3)4-5/h5H

Synthetic route

Chloronitroacetyl chloride (85915-53-3) → dichloroformoxime (1794-86-1)

Conditions	Yield
With urea In diethyl ether for 0.5h; Heating; further reagents (C6H11NH)2CO, (MeNH)2CO, thiourea, (PhNH)2CO;	75%

mercury(II) fulminate → 3,4-dichloro-1,2,5-oxadiazole-N-oxide (34698-60-7) + dichloroformoxime (1794-86-1)

Conditions	Yield
With chlorine In water under cooling with ice-water Cl2 is led into the suspension; dichlorofuroxane isolated as oil; dichlorofuroxim extracted with ether;	A n/a B 40%
With Cl2 In water under cooling with ice-water Cl2 is led into the suspension; dichlorofuroxane isolated as oil; dichlorofuroxim extracted with ether;	A n/a B 40%
With chlorine In hydrogenchloride
With Cl2 In hydrogenchloride

stannane (7440-31-5) + chloropicrin (76-06-2) → dichloroformoxime (1794-86-1)

Conditions	Yield
With tin In acetonitrile	16.8%

trichloronitrosomethane (3711-49-7) → dichloroformoxime (1794-86-1)

Conditions	Yield
With hydrogenchloride; diethyl ether; tin(ll) chloride
With ethanol; sulfur dioxide; water
With ethanol; hydrogen sulfide
With methanol; hydrogen sulfide
With methanol; aluminium amalgam

bromodichloronitrosomethane (73411-12-8) → dichloroformoxime (1794-86-1)

Conditions	Yield
With methanol; hydrogen sulfide

chloropicrin (76-06-2) → dichloroformoxime (1794-86-1)

Conditions	Yield
With sulfuric acid durch elektrolytische Reduktion an einer Zinnkathode;
With hydrogenchloride; tin; diethyl ether at 0 - 5℃;
(reduction);

chloropicrin (76-06-2) → dichloroformoxime (1794-86-1) + N-Methylhydroxylamine (593-77-1) + trichloronitrosomethane (3711-49-7) + methylamine (74-89-5)

Conditions	Yield
Bei der elektrolytischen Reduktion entstehen je nach den Bedingungen wechselnde Menge;

dichloro-dinitro-methane (1587-41-3) → dichloroformoxime (1794-86-1)

Conditions	Yield
With hydrogenchloride; tin; diethyl ether at 0 - 5℃;

mercury fulminate (92114-96-0) → dichloroformoxime (1794-86-1)

Conditions	Yield
With water; chlorine
With hydrogenchloride; chlorine
With chloroethane; chlorine
With sodium hypochlorite

sodium cyanate (15736-98-8) → dichloroformoxime (1794-86-1)

Conditions	Yield
With sulfuric acid; water; chlorine at 0℃;

nitromethane (75-52-5) → dichloroformoxime (1794-86-1)

Conditions	Yield
With chlorine

hydroxyiminoacetic acid (3545-80-0) → dichloroformoxime (1794-86-1)

Conditions	Yield
With N-chloro-succinimide In 1,2-dimethoxyethane for 0.166667h; Heating;
With N-chloro-succinimide In 1,2-dimethoxyethane Heating;
With N-chloro-succinimide In 1,2-dimethoxyethane at 55 - 110℃;

Glyoxilic acid (298-12-4) → dichloroformoxime (1794-86-1)

Conditions	Yield
With hydroxylamine hydrochloride; chlorine; sodium hydrogencarbonate 1.) water, 18 h; Multistep reaction;

glyoxylic acid aldoxime (168208-95-5) → dichloroformoxime (1794-86-1)

Conditions	Yield
With N-chloro-succinimide In 1,2-dimethoxyethane Heating;

pyruvohydroximoyl chloride (5471-68-1) + water (7732-18-5) + chlorine (7782-50-5) → dichloroformoxime (1794-86-1) + chloropicrin (76-06-2)

Conditions	Yield
at 10 - 20℃;

1-chloro-1-hydroxyimino-acetone → dichloroformoxime (1794-86-1)

Conditions	Yield
With water; chlorine at 10 - 20℃;

methanol (67-56-1) + trichloronitrosomethane (3711-49-7) + hydrogen sulfide (7783-06-4) → dichloroformoxime (1794-86-1)

ethanol (64-17-5) + trichloronitrosomethane (3711-49-7) + hydrogen sulfide (7783-06-4) → dichloroformoxime (1794-86-1)

ethanol (64-17-5) + trichloronitrosomethane (3711-49-7) + amalgamated aluminium → dichloroformoxime (1794-86-1)

hydrogenchloride (7647-01-0) + diethyl ether (60-29-7) + chloropicrin (76-06-2) + tin → dichloroformoxime (1794-86-1)

Conditions	Yield
at 0 - 5℃;

fulminic acid (51060-05-0) → dichloroformoxime (1794-86-1)

Conditions	Yield
With chlorine In water
With chlorine In diethyl ether -80°C;
With chlorine In further solvent(s) in ethyl chloride;

dichloroformoxime (1794-86-1) + 1-copper(I) (4-ethylphenyl)ethyne → 3-chloro-5-(4-ethylphenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.616667h;	97%

dichloroformoxime (1794-86-1) + copper(I) 4-methoxyphenylacetylenide (48121-13-7) → 3-chloro-5-(4-methoxyphenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.783333h;	95%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-chlorophenyl)ethyne (49748-64-3) → 3-chloro-5-(4-chlorophenyl)isoxazole (56045-68-2)

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.783333h;	95%

dichloroformoxime (1794-86-1) + C7H11Cu (1371569-77-5) → 3-chloro-4-iodo-5-isopentylisoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	94%

copper(I) phenylacetylenide (13146-23-1) + dichloroformoxime (1794-86-1) → 3-chloro-4-iodo-5-phenylisoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h; Concentration; Temperature;	94%

dichloroformoxime (1794-86-1) + copper(I) cyclohexylethynylide (78630-29-2) → 3-chloro-5-cyclohexylisoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.5h;	93%

dichloroformoxime (1794-86-1) + 1-copper(I) (3-methylphenyl)ethyne (99254-92-9) → 3-chloro-5-(3-methylphenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.683333h;	93%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-chlorophenyl)ethyne (49748-64-3) → 3-chloro-4-iodo-5-(4-chlorophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	93%

dichloroformoxime (1794-86-1) + C7H11CuO → 3-chloro-4-iodo-5-(tert-butoxymethyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	93%

copper(I) phenylacetylenide (13146-23-1) + dichloroformoxime (1794-86-1) → 3-chloro-5-phenylisoxazole (31329-61-0)

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 1h;	92%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-fluorophenyl)ethyne → 3-chloro-4-iodo-5-(4-fluorophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	92%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-bromophenyl)ethyne (118520-70-0) → 3-chloro-5-(4-bromophenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.583333h;	91%

dichloroformoxime (1794-86-1) + copper(I) (2-fluorophenyl)acetylide → 3-chloro-4-iodo-5-(2-fluorophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	91%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-bromophenyl)ethyne (118520-70-0) → 3-chloro-4-iodo-5-(4-bromophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	91%

dichloroformoxime (1794-86-1) + 1-copper(I) (2-methylphenyl)ethyne → 3-chloro-5-(2-methylphenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.9h;	90%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-fluorophenyl)ethyne → 3-chloro-5-(4-fluorophenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 1.5h;	90%

dichloroformoxime (1794-86-1) + 1-copper(I) (3-fluorophenyl)ethyne → 3-chloro-4-iodo-5-(3-fluorophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	90%

dichloroformoxime (1794-86-1) + copper(I) (2-fluorophenyl)acetylide → 3-chloro-5-(2-fluorophenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.5h;	89%

dichloroformoxime (1794-86-1) + N-allylacetamide (692-33-1) → 5-<(acetylamino)methyl>-3-chloro-2-isoxazoline (121596-80-3)

Conditions	Yield
With potassium hydrogencarbonate In water; ethyl acetate for 20h;	88%

dichloroformoxime (1794-86-1) + copper(I) hexylacetylenide (54502-24-8) → 3-chloro-4-iodo-5-heptylisoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	87%

dichloroformoxime (1794-86-1) + (p-tolylethynyl)copper (31638-66-1) → 3-chloro-5-(4-methylphenyl)isoxazole (62847-41-0)

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.5h;	85%

dichloroformoxime (1794-86-1) + (p-tolylethynyl)copper (31638-66-1) → 3-chloro-4-iodo-5-(4-tolyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	84%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-nitrophenyl)ethyne (48129-93-7) → 3-chloro-5-(4-nitrophenyl)isoxazole (62847-42-1)

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.55h;	83%

dichloroformoxime (1794-86-1) + 1-copper(I) (4-nitrophenyl)ethyne (48129-93-7) → 3-chloro-4-iodo-5-(4-nitrophenyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	83%

styrene (292638-84-7) + dichloroformoxime (1794-86-1) → butyl 3-(trichlorovinyl)-4,5-dihydroisoxazole-5-carboxylate (62056-52-4)

Conditions	Yield
With potassium hydrogencarbonate In 1,2-dimethoxyethane; water at 25℃; for 12h;	82%
With silver nitrate In tetrahydrofuran at 60 - 65℃; for 0.333333h;	73%
With silver nitrate In tetrahydrofuran at 60 - 65℃; for 0.333333h; Product distribution; Var. alkene;	73%
With sodium carbonate In diethyl ether; water for 26h;	32.02%

dichloroformoxime (1794-86-1) + 1-copper(I) (3-fluorophenyl)ethyne → 3-chloro-5-(3-fluorophenyl)isoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 1.33333h;	82%

dichloroformoxime (1794-86-1) + 1-copper(I) (3-methylphenyl)ethyne (99254-92-9) → 3-chloro-4-iodo-5-(3-tolyl)isoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	82%

dichloroformoxime (1794-86-1) + 1-copper(I)-5-methylhex-1-yne → 3-chloro-5-isopentylisoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.2h;	81%

dichloroformoxime (1794-86-1) + 1-copper(I) cyclopropylethyne → 3-chloro-4-iodo-5-cyclopropylisoxazole

Conditions	Yield
With iodine; sodium hydrogencarbonate In N,N-dimethyl-formamide at 20℃; for 6.16667h;	81%

dichloroformoxime (1794-86-1) + 1-copper(I) cyclopentylethyne → 3-chloro-5-cyclopentylisoxazole

Conditions	Yield
In N,N-dimethyl-formamide at 45℃; for 0.5h;	80%

Upstream product

• 3711-49-7 trichloronitrosomethane 
• 73411-12-8 bromodichloronitrosomethane 
• 76-06-2 chloropicrin 
• 1587-41-3 dichloro-dinitro-methane 
• 92114-96-0 mercury fulminate 
• 15736-98-8 sodium cyanate 
• 75-52-5 nitromethane 
• 3545-80-0 hydroxyiminoacetic acid 
• 85915-53-3 Chloronitroacetyl chloride 
• 298-12-4 Glyoxilic acid 
• 168208-95-5 glyoxylic acid aldoxime 
• 5471-68-1 pyruvohydroximoyl chloride 
• 7732-18-5 water 
• 7782-50-5 chlorine 

Downstream Products

• 1587-41-3 dichloro-dinitro-methane 
• 5329-29-3 triaminoguanidine hydrochloride 
• 62056-52-4 butyl 3-(trichlorovinyl)-4,5-dihydroisoxazole-5-carboxylate 
• 31329-61-0 3-chloro-5-phenylisoxazole 
• 105175-03-9 (3-chloro-isoxazol-5-yl)-methanol 
• 62847-41-0 3-chloro-5-(4-methylphenyl)isoxazole 
• 73028-29-2 3-chloro-isoxazole 
• 85559-44-0 (4S,5S)-3-Chloro-5-methyl-4-phenyl-4,5-dihydro-isoxazole 
• 85559-43-9 (4S,5R)-3-Chloro-4-methyl-5-phenyl-4,5-dihydro-isoxazole 
• 115328-86-4 5-<(benzyloxycarbonylamino)methyl>-3-chloro-2-isoxazoline 
• 136755-31-2 erythro-3-chloro-5-(α-trichloroacetamido)benzyl-2-isoxazoline 
• 136755-31-2 threo-3-chloro-5-(α-trichloroacetamido)benzyl-2-isoxazoline 
• 136755-33-4 erythro-5-(α-t-butoxycarbonylamino)benzyl-3-chloro-2-isoxazoline 
• 136755-33-4 threo-5-(α-t-butoxycarbonylamino)benzyl-3-chloro-2-isoxazoline 

Relevant academic research and scientific papers

Synthesis and herbicidal activity of novel N -(2,2,2)- trifluoroethylpyrazole derivatives

A series of novel N-(2,2,2)-trifluoroethylpyrazole derivatives were synthesized, and their structures were characterized by IR, mass spectroscopy, 1H NMR, and elementary analysis. The herbicidal activities of target compounds 10a?c and 11a?c we

PROCESS FOR PREPARATION OF PYROXASULFONE

The present invention discloses a process for the preparation of Pyroxasulfone of Formula (I) or salt thereof. Particularly, the present invention discloses an improved process for the preparation of hydroxycarbonimidic dibromide compound of Formula (III) or salt thereof, wherein bromine anion is recycled by using a suitable oxidizing agent. Moreover, the present invention relates to a continuous flow process for preparing of compound of Formula (I) or salt thereof.

A two-valence sulfonyl isoxazole derivatives and use thereof

The invention discloses a bi-titer sulfonyl isoxazole derivative in the technical field of organic compound weedicides, and application thereof. The bi-titer sulfonyl isoxazole derivative has a molecular structural formula shown as a general formula I. The invention further discloses a preparation method of the bi-titer sulfonyl isoxazole derivative. The bi-titer sulfonyl isoxazole derivative has very high activity of inhibiting weed growth and killing and removing weeds, and can be used in agricultural production, and is classified as a novel active component for weedicides.

The biological targets of acivicin inspired 3-chloro- and 3-bromodihydroisoxazole scaffolds

Target analysis of acivicin derived 3-halodihydroisoxazoles scaffolds in living non-pathogenic and pathogenic bacteria.

Investigation of the scope of a [3+2] cycloaddition approach to isoxazole boronic esters

The [3+2] cycloaddition reaction of nitrile oxides and alkynylboronates provides direct access to a wide variety of isoxazole boronic esters. Specifically, this technique has been employed to generate trisubstituted isoxazole 4-boronates and disubstituted isoxazoles where the boronic ester moiety can be installed at C-4 or C-5 with high levels of regiocontrol. The application of this methodology in the synthesis of non-steroidal antiinflammatory agents is also described.

Synthesis of α-Amino-3-chloro-4,5-dihydro-5-methyl-5-isoxazoleacetic Acid, a Ring-Methylated Analogue of the Antitumor Agent Acivicin (AT-125)

α-Amino-3-chloro-4,5-dihydro-5-methyl-5-isoxazoleacetic acid (8), a ring-methylated analogue of the potent antitumor agent acivicin (AT-125), is synthesized in a 6-step procedure in 63percent overall yield from (S)-valine.Key step is the 1,3-dipolar addition of bromonitrile oxide to the N,C-protected (S)-isodehydrovaline (6) available from (S)-valine in four steps involving the photoisomerization of N-phthaloylvaline methyl ester (1).The stereochemical course of the 1,3-dipolar cycloaddition is proven by means of a X-ray structure analysis of the major diastereoisomer 7a formed in the chloronitrile oxide cycloaddition.The absolute configuration of the major (u) diastereomer 7a and the bromo derivative 7b is (αS,5R). - Key Words: Acivicin / Photochemistry / 1,3-Dipolar cycloadditions / Nitrile oxides

Carboxy- and Cyano-Hydroxylation of Alkenes. - Synthesis of 3-Hydroxy-4-amino Acids and Butyrolactones via the Isoxazoline Route

Dichloro- and dibromoformaldoximes are useful 1,3-dipolar cycloaddition reagents.They are conveniently preparated in situ, in high yields by dihalogenation of glyoxalic acid aldoxime with N-bromo- and N-chlorosuccinimide or tert-butyl hypochlorite.Dehydrohalogenation with potassium hydrogen carbonate in the presence of alkenes gives 3-halo-isoxazolines in a one-pot reaction.Reduction with iron pentacarbonyl gives β-hydroxynitriles.Methoxylation and catalytic reduction give β-hydroxy esters.Allyl alcohols and allylamines are transformed with halonitrile oxides into butyrolactones (DL-angelica lactone) and DL-3-hydroxy-4-amino acids (carnitine, 4-amino-3-hydroxybutyric acid), respectively.The lactonization is best effected by heating the γ-silyloxy ester in acetic acid with potassium hydrogen sulfate as catalyst.A synthesis of N-Boc-dihydromuscimol is described.

ONE POT SYNTHESIS OF 3-CHLORO-5-SUBSTITUTED IZOXAZOLES BY 1,3-DIPOLAR CYCLOADDITION

A synthesis of 3-chloro-5-substituted isoxazoles by 1,3-dipolar cycloaddition utilizing an easy preparation of dichloroformaldoxime is reported.

Production of dichloroformoxime

A method for the production of dichloroformoxime is disclosed in which chloropicrin is dissolved in a nonbasic aprotic organic solvent together with anhydrous hydrogen chloride, and said chloropicrin is reduced to dichloroformoxime in said solution in the