Novel grafted electrochemical interface for covalent glucose oxidase immobilization using reactive PENTAFLUOROPHENYL METHACRYLATE (cas 13642-97-2)
-
Add time:09/05/2019 Source:sciencedirect.com
One of the most important factors for the proper functioning of enzymatic electrochemical biosensors is the enzyme immobilization strategy. In this work, glucose oxidase was covalently immobilized using pentafluorophenyl methacrylate (PFM) by applying two different surface modification techniques (plasma polymerization and plasma-grafting). The grafted surface was specifically designed to covalently anchor enzyme molecules. It was observed using QCM-D measurements the PFM plasma-grafted surfaces were able to retain a higher number of active enzyme molecules than the PFM polymerized surfaces. An amperometric glucose biosensor using titanium dioxide nanotubes array (TiO2NTAs) modified by PFM plasma-grafted surface was prepared. The resulting biosensor exhibited a fast response and short analysis time (approximately eight minutes per sample). Moreover, this biosensor achieved high sensitivity (9.76 μA mM−1) with a linear range from 0.25 to 1.49 mM and a limit of detection (LOD) equal to 0.10 mM of glucose. In addition, the glucose content of 16 different food samples was successfully measured using the developed biosensor. The obtained results were compared with the respective HPLC value and a deviation smaller than 10% was obtained in all the cases. Therefore, the biosensor was able to overcome all possible interferences in the selected samples/matrices.
We also recommend Trading Suppliers and Manufacturers of PENTAFLUOROPHENYL METHACRYLATE (cas 13642-97-2). Pls Click Website Link as below: cas 13642-97-2 suppliers
Prev:Efficacy of a new bronchodilator, Soterenol (cas 13642-52-9), on experimental locked-lung syndrome in dogs
Next:Experimental measurement of solubility curves for poly(methyl methacrylate-co-PENTAFLUOROPHENYL METHACRYLATE (cas 13642-97-2)) in supercritical solvents) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Synthesis of pentafluorophenyl(meth)acrylate polymers: New precursor polymers for the synthesis of multifunctional materials09/26/2019
- UV-tunable upper critical solution temperature behavior of azobenzene containing poly(methyl methacrylate) in aqueous ethanol09/25/2019
- Synthesis and characterization of photoactive porphyrin and poly(2-hydroxyethyl methacrylate) based materials with bactericidal properties09/24/2019
- A novel copolymer of methyl methacrylate with N-pentafluorophenyl maleimide: High glass transition temperature and highly transparent polymer09/10/2019
- Synthesis of poly[1,1,1,3,3,3-hexafluoro-2-(pentafluorophenyl)propan-2-yl methacrylate]: Thermal and optical properties of the copolymers with methyl methacrylate09/09/2019
- Regular ArticleCascade post-polymerization modification of single pentafluorophenyl ester-bearing homopolymer as a facile route to redox-responsive nanogels09/08/2019
- Optical and thermal properties of methyl methacrylate and PENTAFLUOROPHENYL METHACRYLATE (cas 13642-97-2) copolymer: Design of copolymers for low-loss optical fibers for gigabit in-home communications09/07/2019
- Experimental measurement of solubility curves for poly(methyl methacrylate-co-PENTAFLUOROPHENYL METHACRYLATE (cas 13642-97-2)) in supercritical solvents09/06/2019
-
Health and Chemical more >
-
Related Products


