2226-88-2Relevant articles and documents
Preparation method of organic metal salt additive (by machine translation)
-
Paragraph 0013; 0025; 0029, (2020/06/02)
The organic metal salt additive, prepared by mixing :(1), washing, with short-chain organic acid as acid source, and then mixing, with the resulting solution of Step ;(2) to obtain the high-purity organic metal salt additive, has the advantages (1) as follows, The organic metal salt additive is relatively high in crystal form structure and high in purity, and has good industrial application prospects, through mixing, of an iron source or a calcium source, or a, zinc source with a high-purity, organic metal salt additive agent in an aqueous solution with, a wide,price. product source. (by machine translation)
PROCESSES FOR PRODUCING CARBOXYLIC ACIDS FROM FERMANTATION BROTHS CONTAINING THEIR AMMONIUM SALTS
-
Paragraph 0065-0068, (2013/03/28)
Process for the preparation of carboxylic acids like succinic acid (SA) from their correponding biologically-produced ammonium salts (like DAS) and / or amides and / or imides. The process involves reacting the biologically-produced derivatives at high temperature, removing ammonia and water, crystallizing the carboxylic acid obtained and recycling the mother liquor to the reaction system.
METHOD FOR PREPARING AMMONIUM SALTS OF FUMARIC OR SUCCINIC ACID
-
Page/Page column 3, (2012/06/01)
An improved process for preparing ammonium salts from fumaric or succinic acid, is described. The method consists of neutralizing the corresponding acid carbonate or ammonium bicarbonate at a molar stoichiometric or greater than the stoichiometric ratio of 4-5% in a saturated aqueous solution of the synthesized salt at a temperature not exceeding 40° C., followed by separation of the product and drying at a temperature not exceeding 70° C. After separation of the ammonium salts, the filtrate can be re-used. Isolation of the product is usually carried out by cooling the reaction mixture to a temperature of 15-18C°. The product comes out in almost crystalline form. Saturated aqueous solution of the synthesized salt is formed by the interaction of carbonate or ammonium bicarbonate with the appropriate acid at a temperature not exceeding 40° C. It is possible to obtain cleaner salt concentration weighing more than 99% and not yielding lower than 98%. The method allows for an increase in the yield of targeted products and ensures their consistent high quality due to their formation in crystalline form.