Spray cooling with Ammonium hydroxide (cas 1336-21-6)
-
Add time:08/30/2019 Source:sciencedirect.com
An experimental study was conducted to investigate the performance characteristics of spray cooling with ammonium hydroxide (NH4OH) binary mixture for high heat flux removal. Two mixtures, having ammonia mass fractions of 0.3 and 0.5, were selected to represent practical operation conditions near atmospheric pressure and room temperature. Experimental setup involved a closed loop system with a vapor atomized spray nozzle and a 1-cm2 heater sample that simulated a high heat flux source. Tests were performed with gradually increasing heat fluxes of up to 800 W/cm2 and maintaining surface temperatures below ∼75 °C at varying liquid and vapor flow rates. Results indicated that the heat transfer coefficient (HTC) values from NH4OH mixtures can be lower than those from pure water and pure ammonia. The data suggested that boiling depression, due to mass diffusion resistance at liquid vapor interface, could greatly affect the overall spray cooling performance, especially when the binary mixtures comprise components with widely different boiling points. The study therefore provides performance characteristics, as well as some fundamental insights, for a potential spray cooling scheme suitable for low temperature, low pressure operations in various applications including thermal management of aerospace electronics and electro-optics.
We also recommend Trading Suppliers and Manufacturers of Ammonium hydroxide (cas 1336-21-6). Pls Click Website Link as below: cas 1336-21-6 suppliers
Prev:Mechanistic insight into interactions between tetracycline and two iron oxide minerals with different crystal structures
Next:Dissolution mechanism of cellulose in quaternary Ammonium hydroxide (cas 1336-21-6): Revisiting through molecular interactions) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- A SAPO-5-coated membrane for nanofiltration of tetraalkyl Ammonium hydroxide (cas 1336-21-6)09/07/2019
- Pilot Study of Specific Microbe Immobilization Cells (SMICs) Technology in Removing Tetramethyl Ammonium hydroxide (cas 1336-21-6) for Reuse of Low-Strength Electronics Wastewater09/06/2019
- Original articleSynthesis and properties of long-chain quaternary Ammonium hydroxide (cas 1336-21-6)s09/05/2019
- Ammonium hydroxide (cas 1336-21-6) enhancing electrospray response and boosting sensitivity of bisphenol A and its analogs09/04/2019
- The Application of Ammonium hydroxide (cas 1336-21-6) and Sodium Hydroxide for Reagent Softening of Water☆09/03/2019
- Separation Science and EngineeringUsing bipolar membrane electrodialysis to synthesize di-quaternary Ammonium hydroxide (cas 1336-21-6) and optimization design by response surface methodology09/02/2019
- Rapid and efficient removal of silver nanoparticles from plant surfaces using sodium hypochlorite and Ammonium hydroxide (cas 1336-21-6) solution09/01/2019
- Dissolution mechanism of cellulose in quaternary Ammonium hydroxide (cas 1336-21-6): Revisiting through molecular interactions08/31/2019
-
Health and Chemical more >
-
Related Products
- Ammonium (-)-3-bromo-8-camphorsulfonate
- Ammonium (S)-5-((4-amino-4-carboxy-1-oxobutyl)amino)-2-nitrobenzoate
- Ammonium 1-pyrrolidinedithiocarbamate
- Ammonium 2,4-dichlorophenoxyacetate
- Ammonium 2-hydroxyethanesulphonate
- Ammonium 4-nitrobenzoate dihydrate
- Ammonium acetate
- Ammonium adipate
- Ammonium alginate
- Ammonium azide