Ammonium hydroxide (cas 1336-21-6) enhancing electrospray response and boosting sensitivity of bisphenol A and its analogs
-
Add time:09/04/2019 Source:sciencedirect.com
As one of the most important analytical techniques for accurate quantification of bisphenol compounds, liquid chromatography coupled to online electrospray ionization (ESI) tandem mass spectrometry exhibits relative weak ESI response in negative mode, which greatly reduces their sensitivity and limits their detection at trace levels, especially in complex samples such as blood. Based on the facilitated deprotonation of bisphenol molecule under alkaline condition, post-column injection of Ammonium hydroxide (cas 1336-21-6) (NH3·H2O) to mass spectrometer was explored to enhance the ionization efficiency of BPA and its eight analogs and improve their analytical sensitivity. Parameters effecting response intensity and stability were investigated, including mass concentration and flow rate of NH3·H2O. Under the optimal conditions with the addition of 2% (w/w) of NH3·H2O at 4 μL min−1, the instrument detection limits for bisphenol compounds were greatly lowered to 0.001–0.04 ng mL−1, which were 2–28.6 times lower than the result obtained without injecting NH3·H2O, except TBBPA (0.03 ng mL−1 in either case). The relative standard deviations (RSDs) for instrument repeatability of BPA and its analogs at three different concentration levels were in a range of 1.2–20%. Furthermore, a decreased matrix effects (90–111%) for bisphenols (except TBBPA) analysis in serum extracts were found compared with the result obtained without NH3·H2O injection (43–111%). The results demonstrated that the improved instrumental method coupled with suitable pretreatment techniques is more feasible to analyze bisphenol compounds in complex bio-samples.
We also recommend Trading Suppliers and Manufacturers of Ammonium hydroxide (cas 1336-21-6). Pls Click Website Link as below: cas 1336-21-6 suppliers
Prev:The Application of Ammonium hydroxide (cas 1336-21-6) and Sodium Hydroxide for Reagent Softening of Water☆
Next:Original articleSynthesis and properties of long-chain quaternary Ammonium hydroxide (cas 1336-21-6)s) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- A SAPO-5-coated membrane for nanofiltration of tetraalkyl Ammonium hydroxide (cas 1336-21-6)09/07/2019
- Pilot Study of Specific Microbe Immobilization Cells (SMICs) Technology in Removing Tetramethyl Ammonium hydroxide (cas 1336-21-6) for Reuse of Low-Strength Electronics Wastewater09/06/2019
- Original articleSynthesis and properties of long-chain quaternary Ammonium hydroxide (cas 1336-21-6)s09/05/2019
- The Application of Ammonium hydroxide (cas 1336-21-6) and Sodium Hydroxide for Reagent Softening of Water☆09/03/2019
- Separation Science and EngineeringUsing bipolar membrane electrodialysis to synthesize di-quaternary Ammonium hydroxide (cas 1336-21-6) and optimization design by response surface methodology09/02/2019
- Rapid and efficient removal of silver nanoparticles from plant surfaces using sodium hypochlorite and Ammonium hydroxide (cas 1336-21-6) solution09/01/2019
- Dissolution mechanism of cellulose in quaternary Ammonium hydroxide (cas 1336-21-6): Revisiting through molecular interactions08/31/2019
- Spray cooling with Ammonium hydroxide (cas 1336-21-6)08/30/2019
-
Health and Chemical more >
-
Related Products
- Ammonium (-)-3-bromo-8-camphorsulfonate
- Ammonium (S)-5-((4-amino-4-carboxy-1-oxobutyl)amino)-2-nitrobenzoate
- Ammonium 1-pyrrolidinedithiocarbamate
- Ammonium 2,4-dichlorophenoxyacetate
- Ammonium 2-hydroxyethanesulphonate
- Ammonium 4-nitrobenzoate dihydrate
- Ammonium acetate
- Ammonium adipate
- Ammonium alginate
- Ammonium azide