3424-21-3

Basic information

• Product Name: TRIISOPROPYL-AMINE
• Synonyms: SALOR-INT L308803-1EA;TRIISOPROPYL-AMINE;N,N-Bis(1-methylethyl)-2-propanamine;N,N-Diisopropyl-1-methylethanamine;Tris(1-methylethyl)amine;N,N-di(propan-2-yl)propan-2-amine
• CAS NO: 3424-21-3
• Molecular Formula: C₉H₂₁N
• Molecular Weight: 143.27
• EINECS: 222-317-5
• Mol File: 3424-21-3.mol

Chemical Properties

• Boiling Point: 131.8 °C at 760 mmHg
• Flash Point: 21.9 °C
• Appearance: /
• Density: 0.772 g/cm³
• Vapor Pressure: 9.12mmHg at 25°C
• Refractive Index: 1.424
• PKA: 11.06±0.50(Predicted)
• CAS DataBase Reference: TRIISOPROPYL-AMINE(CAS DataBase Reference)
• NIST Chemistry Reference: TRIISOPROPYL-AMINE(3424-21-3)
• EPA Substance Registry System: TRIISOPROPYL-AMINE(3424-21-3)

Safety Data

• Hazardous Substances Data: 3424-21-3(Hazardous Substances Data)

Usage

Uses

Tris(isopropylamine) acts as a base for the synthesis of cyclodextrin, an additive.

InChI:InChI=1/C9H21N/c1-7(2)10(8(3)4)9(5)6/h7-9H,1-6H3

Synthetic route

diisopropylamine (108-18-9) + isopropyl alcohol (67-63-0) → triisopropylamine (3424-21-3)

Conditions	Yield
With iron(III) oxide; (triphenylphosphine)ruthenium acetate at 78℃; for 36h; Molecular sieve;	95.6%

methyllithium (917-54-4) + N-(Chlormethylen)-N-isopropyl-2-propanaminium-chlorid (54485-04-0) → triisopropylamine (3424-21-3)

Conditions	Yield
In diethyl ether for 12h; Ambient temperature;	74%

α-(diisopropylamino)propionitrile (91086-11-2) + methylmagnesium chloride (676-58-4) → triisopropylamine (3424-21-3)

Conditions	Yield
In diethyl ether for 4h; Heating;	49%
In diethyl ether for 0.5h; Heating;	45%

diisopropylamine (108-18-9) + acetone (67-64-1) → triisopropylamine (3424-21-3)

Conditions	Yield
With formic acid In water at 0℃; for 1h; Reflux;	5%

chloro-diisopropyl-amine (24948-81-0) + i-propylpotassium (4867-40-7) → triisopropylamine (3424-21-3)

Conditions	Yield
With Petroleum ether

diisopropyl sulfate (2973-10-6) + diisopropylamine (108-18-9) → triisopropylamine (3424-21-3)

N-(Chlormethylen)-N-isopropyl-2-propanaminium-chlorid (54485-04-0) + methyl iodide (74-88-4) → triisopropylamine (3424-21-3) + N,N,N',N'-tetraisopropyl-1,2-dimethylethylenediamine (99692-09-8)

Conditions	Yield
With magnesium 1.) ether 2.) 12 h, RT; Yield given. Multistep reaction. Yields of byproduct given;
With magnesium 1.) ether, 2.) 12 h, room temperature; Yield given. Multistep reaction. Yields of byproduct given;

isopropylamine (75-31-0) + aluminium oxide-molybdenum (III)-oxide catalyst → triisopropylamine (3424-21-3) + diisopropylamine (108-18-9)

Conditions	Yield
at 400℃;

chloro-diisopropyl-amine (24948-81-0) + i-propylpotassium (4867-40-7) + petroleum ether → triisopropylamine (3424-21-3) + tetraisopropylhydrazine (172909-37-4)

diisopropylamine hydrochloride (819-79-4) → triisopropylamine (3424-21-3)

Conditions	Yield
Multi-step reaction with 2 steps 1: 39 percent / H2O / 4 h / -0.1 °C 2: 49 percent / diethyl ether / 4 h / Heating View Scheme

diisopropylamine (108-18-9) → triisopropylamine (3424-21-3)

Conditions	Yield
Multi-step reaction with 2 steps 1: 37.6 percent / HCl 2: 45 percent / diethyl ether / 0.5 h / Heating View Scheme

tri-isopropylamine hydrochloride → triisopropylamine (3424-21-3)

Conditions	Yield
With sodium hydroxide In methanol at 40 - 50℃; pH=7;

1,3-propanesultone (1120-71-4) + triisopropylamine (3424-21-3) → C12H27NO3S

Conditions	Yield
In 1,2-dichloro-ethane at 40℃; for 4h;	99%

triisopropylamine (3424-21-3) + benzenediazonium tetrafluoroborate (369-57-3) → 1-phenyl-3,3-diisopropyltriaz-1-ene (36719-40-1) + N,N-diisopropylammonium tetrafluoroborate

Conditions	Yield
In acetonitrile at 0 - 20℃; for 1.08333h;	A 72% B 92%

Isopropyl 2-(ethylthiocarbonyloxy)-2-iodoethanoate (352320-96-8) + triisopropylamine (3424-21-3) + ibuprofen (15687-27-1) → 2-[4-(2-Methylpropyl)phenyl]propanoic acid (chlorocarbonyloxy)(isopropoxy-carbonyl)methyl ester (352540-95-5)

Conditions	Yield
With sulfuryl dichloride In dichloromethane	84%

triisopropylamine (3424-21-3) + anthranilic acid amide (28144-70-9) → 2,2-dimethyl-2,3-dihydro-1H-quinazolin-4-one (77726-78-4)

Conditions	Yield
With diphenyl-phosphinic acid; oxygen In 1,4-dioxane at 130℃; under 760.051 Torr; for 18h; Schlenk technique;	82%

triisopropylamine (3424-21-3) + 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (70458-96-7) + 2-butoxy-1-[(chlorocarbonyl)oxy]-2-oxyethyl isobutyrate (352540-92-2) → 7-(4-[(Butoxycarbonyl)(2-methylpropanoyloxy)methoxycarbonyl]-1-piperazinyl)-1-ethyl-6-fluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (352540-97-7)

Conditions	Yield
In dichloromethane	77%

triisopropylamine (3424-21-3) + p-toluenesulfonyl chloride (98-59-9) → N,N-diisopropyl-N′-tosylformimidamide (1209499-73-9)

Conditions	Yield
With sodium azide; copper(ll) bromide In 1,2-dichloro-ethane at 70℃; for 3h;	76%

morpholine (110-91-8) + triisopropylamine (3424-21-3) + 2,2,2-trichloroethyl [6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]carbamate + sodium hydrogencarbonate (144-55-8) → N-[6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]morpholine-4-carboxamide (1005787-03-0)

Conditions	Yield
With dimethyl sulfoxide	73%

triisopropylamine (3424-21-3) + benzenesulfonyl chloride (98-09-9) → N,N-diisopropyl-N'-(phenylsulfonyl)formimidamide (91904-99-3)

Conditions	Yield
With sodium azide; copper(ll) bromide In 1,2-dichloro-ethane at 70℃; for 3h;	72%

triisopropylamine (3424-21-3) + 4-chlorobenzenesulfonyl chloride (98-60-2) → N'-((4-chlorophenyl)sulfonyl)-N,N-diisopropylformimidamide

Conditions	Yield
With sodium azide; copper(ll) bromide In 1,2-dichloro-ethane at 70℃; for 3h;	68%

triisopropylamine (3424-21-3) + 2,2,2-trichloroethyl [6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]carbamate + 2-(2-Aminoethoxy)ethanol (929-06-6) → N-(3-{[2-({[2-(2-hydroxyethoxy)ethyl]carbamoyl}amino)imidazo[1,2-b]pyridazin-6-yl]oxy}phenyl)-3-(trifluoromethyl)benzamide

Conditions	Yield
With dimethyl sulfoxide	62%

rhodium(III) tetrakis(4-tolyl)porphyrin chloride (205259-72-9) + triisopropylamine (3424-21-3) → [rhodium(III)(diisobutylamine)(5,10,15,20-tetratolylporphyrin)]

Conditions	Yield
In further solvent(s) mixt. of Rh complex (0.014 mmol) and (iBu)3N degassed (3 freeze-pump-thaw cycles), heated under N2 at 120°C for 1 d; solvent evapd. in vac., residue chromd. (silica gel, hexane/CH2Cl2 eluent (1:1), then ethyl acetate/CH2Cl2 (1:2) eluent);	57%

1-methyl-piperazine (109-01-3) + triisopropylamine (3424-21-3) + 2,2,2-trichloroethyl [6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]carbamate → 4-methyl-N-[6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]piperazine-1-carboxamide (1005787-05-2)

Conditions	Yield
With dimethyl sulfoxide	50%

Methyl fluorosulfonate (421-20-5) + triisopropylamine (3424-21-3) → N,N,N-Triisopropyl-N-methylammonium-fluorsulfonat

Conditions	Yield
In dichloromethane at 25℃; for 9h; Product distribution; alkylation of other amines, relative alkylation possibility;	31%
In dichloromethane at 20℃; for 0.5h;	31%

triisopropylamine (3424-21-3) → N,N-Bis(5-chloro-3-oxo-1,2-dithiol-4-yl)amine + N,N-Bis(5-chloro-3-oxo-1,2-dithiol-4-yl)isopropylamine

Conditions	Yield
Stage #1: triisopropylamine With 1,4-diaza-bicyclo[2.2.2]octane; disulfur dichloride In 1,2-dichloro-ethane at -40 - 20℃; for 72h; Cyclization; Stage #2: With formic acid In 1,2-dichloro-ethane for 1.5h; Substitution; Heating;	A 6% B 12%

triisopropylamine (3424-21-3) + 2-butoxy-1-[(chlorocarbonyl)oxy]-2-oxyethyl isobutyrate (352540-92-2) → 4-([(Butoxycarbonyl)(2-methylpropanoyloxy)methoxycarbonyl]amino)-N-(5-methyl-3-isoxazolyl)benzenesulfonamide (352541-02-7)

Conditions	Yield
In diethyl ether; dichloromethane; sulfamethoxazole	7.3%

triisopropylamine (3424-21-3) → isopropylphosphoric acid (1623-24-1)

Conditions	Yield
With phosphonic Acid; iodine In ethanol

triisopropylamine (3424-21-3) → N-chloro-tri-isopropylammonium perchlorate

Conditions	Yield
With silver perchlorate; chlorine 1.) CCl4, -20 deg C; 2.) TFA, -20 deg C; Multistep reaction;

triisopropylamine (3424-21-3) + p-benzoquinone (106-51-4) → hydroquinone radical (3225-30-7) + C9H20N

Conditions	Yield
In acetonitrile Quantum yield; flash photolysis study;

triisopropylamine (3424-21-3) → triisopropylamine radical cation

Conditions	Yield
With antimony pentafluoride In dichloromethane at -78.15℃; Oxidation;

Upstream product

• 24948-81-0 chloro-diisopropyl-amine 
• 4867-40-7 i-propylpotassium 
• 2973-10-6 diisopropyl sulfate 
• 108-18-9 diisopropylamine 
• 91086-11-2 α-(diisopropylamino)propionitrile 
• 676-58-4 methylmagnesium chloride 
• 75-31-0 isopropylamine 
• 819-79-4 diisopropylamine hydrochloride 
• 67-63-0 isopropyl alcohol 
• 54485-04-0 N-(Chlormethylen)-N-isopropyl-2-propanaminium-chlorid 
• 74-88-4 methyl iodide 
• 917-54-4 methyllithium 
• 67-64-1 acetone 

Downstream Products

• 1623-24-1 isopropylphosphoric acid 
• 3225-30-7 hydroquinone radical 
• 815-24-7 Di-t-butyl ketone 
• 352540-95-5 2-[4-(2-Methylpropyl)phenyl]propanoic acid (chlorocarbonyloxy)(isopropoxy-carbonyl)methyl ester 
• 352541-02-7 4-([(Butoxycarbonyl)(2-methylpropanoyloxy)methoxycarbonyl]amino)-N-(5-methyl-3-isoxazolyl)benzenesulfonamide 
• 1005787-03-0 N-[6-(3-{[3-(trifluoromethyl)benzoyl]amino}phenoxy)imidazo[1,2-b]pyridazin-2-yl]morpholine-4-carboxamide 
• 77726-78-4 2,2-dimethyl-2,3-dihydro-1H-quinazolin-4-one 
• 2700-30-3 N,N-diisorpopylformamide 
• 1209499-73-9 N,N-diisopropyl-N′-tosylformimidamide 
• 91904-99-3 N,N-diisopropyl-N'-(phenylsulfonyl)formimidamide 

Relevant articles and documents

Photophysics of a Sterically Crowded Tertiary-Saturated Amine: Triisopropylamine

The spectroscopic and photophysical properties of triisopropylamine (TIPA), a sterically overcrowded amine, are reported in the vapor phase and in n-hexane and tetrahydrofuran solution.On the basis of available experimental data and several semiempirical

Preparation method of diisopropylethylamine

The invention provides a preparation method of diisopropylethylamine, and belongs to the technical field of organic synthesis. According to the preparation method of the diisopropylethylamine, diisopropylamine is used as a raw material, the diisopropylamine and ethanol are subjected to a hydrogen borrowing reaction under the catalytic action of triphenylphosphine ruthenium acetate or a mixture ofthe triphenylphosphine ruthenium acetate and ferric oxide in a certain proportion, and the yield is high. Compared with the prior art, the method has the advantages of high atom economy, cleanness, zero pollution, high efficiency and low cost, and the only by-product in the reaction is water; the catalyst is cheap and easily available, the use of the mixed catalyst effectively reduces the use amount of a noble metal organic catalyst, the synergistic effect obtains high yield, and the method is also suitable for other large-space rental substrates.

Aryldiazonium Salts as Nitrogen-Based Lewis Acids: Facile Synthesis of Tuneable Azophosphonium Salts

Inspired by the commercially available azoimidazolium dyes (e.g., Basic Red 51) that can be obtained from aryldiazonium salts and N-heterocyclic carbenes, we developed the synthesis of a unique set of arylazophosphonium salts. A range of colours were obtained by applying readily tuneable phosphine donor ligands and para-substituted aryldiazonium salts as nitrogen-based Lewis acids. With cyclic voltammetry, a general procedure was designed to establish whether the reaction between a Lewis acid and a Lewis base occurs by single-electron transfer or electron-pair transfer.

Method for preparing high-purity glufosinate-ammonium by organic alkali process

The invention discloses a method for preparing high-purity glufosinate-ammonium by an organic alkali process. The method comprises the following steps: by using a glufosinate-ammonium hydrochloride solution as a raw material, filtering the raw material, concentrating, directly adding tertiary amine R1R2R3N1 into the concentrated solution under the heating condition of 60-80 DEG C, and keeping the temperature to carry out hydrochloric acid removal reaction; after the reaction finishes, cooling to -3 to -8 DEG C to precipitate a glufosinate-ammonium free acid crude product; adding alcohol into the crude product, pulping, and filtering, wherein the obtained filter cake is glufosinate-ammonium free acid; adding alcohol into the glufosinate-ammonium free acid, heating to 30-50 DEG C, introducing ammonia gas to react; and after the reaction finishes, cooling to crystallize, filtering, and drying to obtain the glufosinate-ammonium with the purity of at least 88%.

Derivatives of leukotrienes A and C

The present invention provides novel derivatives of leukotrienes A and C which are useful in inhibiting the smooth muscle contracting effects of SRS-A; inhibiting platelet aggregation; and inhibiting the biosynthesis of thromboxane A2.

Synthesis and Properties of Sterically Hindered Tertiary Amines and Guanidines

Sterically hindered tertiary amines 7,8,14,17 are synthesized by reaction of the iminium salts 3,4, and 16 with Grignard compounds 5,12 or alkyllithium compounds 11,13.Hindered guanidines 24 are prepared from chloroformamidinium 22 or (dichloromethane)iminium salts 26 and primary amines 23.The pKa values of the amines 7,8,17, and guanidines 24 are measured, and their alkylation with methyl fluorosulfonate (31) is studied.

19-Hydroxy-PGI2 compounds

Prostacyclin and prostacyclin-type derivatives having a 19-hydroxy feature are disclosed, including processes for preparing them and the appropriate intermediates. The compounds are useful for pharmacological purposes such as inhibition of blood platelate aggregation.

2-Decarboxy-2-hydroxymethyl-19-hydroxy-PG1 analogs

Prostaglandin derivatives having a 19,20-didehydro, a 19-hydroxy, or a 19-keto feature are disclosed, including processes for preparing them and the appropriate intermediates. A typical 19-hydroxy compound of this invention is 19-hydroxy-19-methyl-PGF2α, methyl ester, represented by the formula STR1