626-17-5Relevant articles and documents
Catalytic activity of vanadium-substituted molybdophosphoric acid supported on titania for the vapor-phase synthesis of isophthalonitrile
Senapati,Dutta,Rana, Surjyakanta,Parida,Sahu,Sarkar
, p. 1429 - 1435 (2017)
Different wt% of vanadium-substituted molybdophosphoric acid H4PMo11VO40 loaded on titania (TiO2) are prepared by wet impregnation method. The catalytic activity of PMoV-supported titania catalyst for the vapor-phase ammoxidation of m-xylene at different temperatures is reported here. The synthesized catalysts were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, N2 adsorption–desorption, thermogravimetric/differential thermal analysis, temperature programmed desorption (TPD), temperature programmed reduction (TPR) scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy?(TEM). FTIR studies confirmed that the Keggin structure of PMoV does not change even up to 460°C when loaded on TiO2 surface. Among all the PMoV-supported TiO2 catalysts, 1.7% PMoV/TiO2 showed excellent activity for vapor-phase ammoxidation of m-xylene with 85.4% yield of isophthalonitrile.
Nitrile Synthesis via Desulfonylative-Smiles Rearrangement
Abe, Masahiro,Nitta, Sayasa,Miura, Erina,Kimachi, Tetsutaro,Inamoto, Kiyofumi
, p. 4460 - 4467 (2022/03/15)
Herein, we designed a simple nitrile synthesis from N-[(2-nitrophenyl)sulfonyl]benzamides via base-promoted intramolecular nucleophilic aromatic substitution. The process features redox-neutral conditions as well as no requirement of toxic cyanide species and transition metals. Our process shows broad scope and various functional group compatibility, affording a variety of (hetero)aromatic nitriles in good to excellent yields.
Thermally stable imidazole/heteropoly acid composite as a heterogeneous catalyst for m-xylene ammoxidation
Jeon, Yukwon,Lee, Chanmin,Lee, Gicheon,Kwon, Ohchan,Kim, Jinsol,Park, Sang Sun,Oh, Kyeongseok,Shul, Yong-Gun
, p. 287 - 302 (2021/02/02)
Ammoxidation of m-xylene is evaluated in the presence of a customized heteropoly acid catalyst as an imidazole/molybdovanadophosphoric acid (imidazole/PMoV). Imidazole is employed to maintain its heterogeneous phase during the ammoxidation reaction and to provide the thermal stability of PMoV with the expectation that imidazole can generate strong electronic interactions with terminal molybdenum-oxygen on PMoV. The characterizations of the prepared catalysts are performed using SEM–EDX, XRD, FT-IR, Raman, XPS, and TGA to prove the physical and chemical changes by incorporating imidazole to PMoV, respectively. Also, the thermal stability of the developed catalyst is confirmed by the means of heat treatment test at relatively high temperature. The composite catalyst, imidazole/PMoV, shows an excellent conversion rate of over 98% with high selectivity of isophthalonitrile in m-xylene ammoxidation. Moreover, while the imidazole-free PMoV catalyst is deactivated and washed out during the reaction, the catalyst durability of the imidazole/PMoV is preserved without significant activity loss after 5 reaction cycles at 380 °C.
Visible-Light-Promoted Metal-Free Synthesis of (Hetero)Aromatic Nitriles from C(sp3)?H Bonds**
Murugesan, Kathiravan,Donabauer, Karsten,K?nig, Burkhard
supporting information, p. 2439 - 2445 (2020/12/07)
The metal-free activation of C(sp3)?H bonds to value-added products is of paramount importance in organic synthesis. We report the use of the commercially available organic dye 2,4,6-triphenylpyrylium tetrafluoroborate (TPP) for the conversion of methylarenes to the corresponding aryl nitriles via a photocatalytic process. Applying this methodology, a variety of cyanobenzenes have been synthesized in good to excellent yield under metal- and cyanide-free conditions. We demonstrate the scope of the method with over 50 examples including late-stage functionalization of drug molecules (celecoxib) and complex structures such as l-menthol, amino acids, and cholesterol derivatives. Furthermore, the presented synthetic protocol is applicable for gram-scale reactions. In addition to methylarenes, selected examples for the cyanation of aldehydes, alcohols and oximes are demonstrated as well. Detailed mechanistic investigations have been carried out using time-resolved luminescence quenching studies, control experiments, and NMR spectroscopy as well as kinetic studies, all supporting the proposed catalytic cycle.
Recyclable and Reusable Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O System for Cyanation of Aryl Chlorides with Potassium Ferrocyanide
Cai, Mingzhong,Huang, Bin,Liu, Rong,Xu, Caifeng
, (2021/12/03)
Pd(OAc)2/XPhos–SO3Na in a mixture of poly(ethylene glycol) (PEG-400) and water is shown to be a highly efficient catalyst for the cyanation of aryl chlorides with potassium ferrocyanide. The reaction proceeded smoothly at 100 or 120?oC with K2CO3 or KOAc as base, delivering a variety of aromatic nitriles in good to excellent yields. The isolation of the crude products is facilely performed by extraction with cyclohexane and more importantly, both expensive Pd(OAc)2 and XPhos–SO3Na in PEG-400/H2O system could be easily recycled and reused at least six times without any apparent loss of catalytic efficiency. Graphical Abstract: Palladium-catalyzed cyanation of aryl chlorides with potassium ferrocyanide leading to aryl nitriles by using Pd(OAc)2/XPhos–SO3Na/PEG-400/H2O as a highly efficient and recyclable catalytic system is described.[Figure not available: see fulltext.]
Nickel-Catalyzed Cyanation of Aryl Thioethers
Delcaillau, Tristan,Woenckhaus-Alvarez, Adrian,Morandi, Bill
supporting information, p. 7018 - 7022 (2021/09/13)
A nickel-catalyzed cyanation of aryl thioethers using Zn(CN)2 as a cyanide source has been developed to access functionalized aryl nitriles. The ligand dcype (1,2-bis(dicyclohexylphosphino)ethane) in combination with the base KOAc (potassium acetate) is essential for achieving this transformation efficiently. This reaction involves both a C-S bond activation and a C-C bond formation. The scalability, low catalyst and reagents loadings, and high functional group tolerance have enabled both late-stage derivatization and polymer recycling, demonstrating the reaction's utility across organic chemistry.
METHOD FOR PREPARING PHTHALONITRILE COMPOUND
-
Paragraph 0042-0049, (2021/08/17)
One embodiment of the present invention relates to a method for preparing a phthalonitrile-based compound, including the steps of: (a) preparing a mixture including a phthalic acid-based compound and a nitrile-based compound; and (b) reacting the mixture, wherein the step (b) is performed under supercritical conditions of the nitrile-based compound.
An overview on the progress and development on the palladium catalyzed direct cyanation
Heydari, Somayyeh,Habibi, Davood,Reza Faraji, Ali,keypour, Hassan,Mahmoudabadi, Masoumeh
, (2020/10/02)
Generation of the positive CN ion and the corresponding direct cyanation are both extremely important for cyanation of aromatic compounds. Hereby, we would like to report the simultaneous use of the new Pd nano-catalyst as well as the three types of the N-arylsulfonyl cyanamides (A, B and C) as potent reagents for the in situ generation of the positive CN ion for the direct cyanation of phenylboronic acids in acetonitrile at reflux conditions.
A Versatile VMPO Catalyst Prepared In Situ for Oxidative Ammonolysis of Isomeric Picolines and Xylenes
Dutta, P.,Pathak, D. D.,Senapati, Rabinarayan
, p. 292 - 298 (2020/04/17)
Abstract: The V2O5–MoO3–P2O5 (VMPO) catalyst has been prepared in situ by thermal decomposition of vanado-molybdophosphoric acid (PMoV) on TiO2 support at 475°C. The TiO2 supported VMPO catalysts are characterized by FT–IR, XRD, BET surface area, NH3–TPD, and H2–TPR. Morphology of the catalyst has been studied by TEM. The accumulated data indicate decomposition of PMoV and presence of phosphate and pyrophosphate phases of molybdenum and vanadium after calcination. TPD and TPR studies exhibit the moderate acidity and presence of V4+ in the material, respectively. The VMPO catalyst has been used for ammoxidation of six different compounds including three isomeric picolines and three isomeric xylenes to the corresponding nitriles with the yield of 90–96%.
Reductive cyanation of organic chlorides using CO2 and NH3 via Triphos–Ni(I) species
Dong, Yanan,Li, Yuehui,Yang, Peiju,Zhao, Shizhen
, (2020/08/19)
Cyano-containing compounds constitute important pharmaceuticals, agrochemicals and organic materials. Traditional cyanation methods often rely on the use of toxic metal cyanides which have serious disposal, storage and transportation issues. Therefore, there is an increasing need to develop general and efficient catalytic methods for cyanide-free production of nitriles. Here we report the reductive cyanation of organic chlorides using CO2/NH3 as the electrophilic CN source. The use of tridentate phosphine ligand Triphos allows for the nickel-catalyzed cyanation of a broad array of aryl and aliphatic chlorides to produce the desired nitrile products in good yields, and with excellent functional group tolerance. Cheap and bench-stable urea was also shown as suitable CN source, suggesting promising application potential. Mechanistic studies imply that Triphos-Ni(I) species are responsible for the reductive C-C coupling approach involving isocyanate intermediates. This method expands the application potential of reductive cyanation in the synthesis of functionalized nitrile compounds under cyanide-free conditions, which is valuable for safe synthesis of (isotope-labeled) drugs.
