2,4,6-Triphenylpyrylium tetrafluoroborate (CAS NO.: ), which is also known as Pyrylium tetrafluoroborate, 2,4,6-triphenyl-, could be produced through the following synthetic route.

In a 1-l. four-necked flask (or a three-necked flask with a Y-tube connector) equipped with a mechanical stirrer, a reflux condenser, a dropping funnel, and a thermometer are placed 208 g. (1.00 mole) of benzalacetophenone, 60 g. (58.5 ml., 0.50 mole) of acetophenone, and 350 ml. of 1,2-dichloroethane. The contents of the flask are warmed to 70–75°, and 160 ml. of a 52% ethereal solution of fluoboric acid is added from the funnel with stirring during 30 minutes. With the first addition the mixture becomes orange; subsequently the color changes to brownish yellow. After the addition is completed, the mixture is stirred and heated under reflux for 1 hour. The fluorescent mixture is allowed to stand overnight in a refrigerator. The crystalline product that separates is collected on a Buchner funnel and washed well with ether. By addition of 250 ml. of ether to the mother liquor an additional quantity of 2,4,6-triphenylpyrylium tetrafluoroborate is obtained. A total yield of 125–135 g. (63–68%) of yellow crystals results; m.p. 218–225°. The product can be recrystallized from 650–700 ml. of 1,2-dichloroethane, when it separates in the form of yellow needles, m.p. 251–257°. The yield of product dried at 80° (10 mm.) for 3 hours is 102.5–107 g. (52–54%).