589-16-2Relevant articles and documents
MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis**
Darawsheh, Mohanad D.,Mazarío, Jaime,Lopes, Christian W.,Giménez-Marqués, Mónica,Domine, Marcelo E.,Meira, Debora M.,Martínez, Jordan,Mínguez Espallargas, Guillermo,O?a-Burgos, Pascual
, p. 13659 - 13667 (2020)
Metal–organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst.
Selective hydrodeoxygenation of acetophenone derivatives using a Fe25Ru75@SILP catalyst: a practical approach to the synthesis of alkyl phenols and anilines
Bordet, Alexis,Goclik, Lisa,Leitner, Walter,Walschus, Henrik
supporting information, p. 2937 - 2945 (2022/04/07)
A versatile synthetic pathway for the production of valuable alkyl phenols and anilines has been developed based on the selective hydrodeoxygenation of a wide range of hydroxy-, amino-, and nitro-acetophenone derivatives as readily available substrates. Bimetallic iron ruthenium nanoparticles immobilized on an imidazolium-based supported ionic liquid phase (Fe25Ru75@SILP) act as highly active and selective catalysts for the deoxygenation of the side-chain without hydrogenation of the aromatic ring. The catalytic system allows operation under continuous flow conditions with high robustness and flexibility as demonstrated for the alternating conversion of 3′,5′-dimethoxy-4′-hydroxyacetophenone and 4′-hydroxynonanophenone as model substrates.
Rh-PVP Catalyzed Reductive Amination of Phenols by Ammonia or Amines to Cyclohexylamines under Solvent-free Conditions
Chaudhari, Chandan,Nagaoka, Katsutoshi,Nishida, Yoshihide,Rumi, Saeki,Sato, Katsutoshi,Shiraishi, Masaya
supporting information, p. 81 - 84 (2022/01/12)
Colloidal metal nanoparticles were examined for reductive amination of phenol by ammonia under mild reaction conditions. The results showed that Rh-PVP was the most active catalyst for reductive amination reaction. Linear, cyclic, and amino alcohols were used as nucleophiles and converted to primary/secondary/tertiary amines. Using this strategy, the synthesis of an industrially important chemical, N-cyclohexyl- 2-pyrrolidone was explored.
Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols
Antil, Neha,Kumar, Ajay,Akhtar, Naved,Newar, Rajashree,Begum, Wahida,Manna, Kuntal
supporting information, p. 9029 - 9039 (2021/06/28)
Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H2. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl2 followed by the reaction of NaEt3BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of CoII and AlIII centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H2 allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.
Rhodium-terpyridine Catalyzed Transfer Hydrogenation of Aromatic Nitro Compounds in Water
Liu, Yuxuan,Miao, Wang,Tang, Weijun,Xue, Dong,Xiao, Jianliang,Wang, Chao,Li, Changzhi
supporting information, p. 1725 - 1729 (2021/06/01)
A rhodium terpyridine complex catalyzed transfer hydrogenation of nitroarenes to anilines with i-PrOH as hydrogen source and water as solvent has been developed. The catalytic system can work at a substrate/catalyst (S/C) ratio of 2000, with a turnover frequency (TOF) up to 3360 h?1, which represents one of the most active catalytic transfer hydrogenation systems for nitroarene reduction. The catalytic system is operationally simple and the protocol could be scaled up to 20 gram scale. The water-soluble catalyst bearing a carboxyl group could be recycled 15 times without significant loss of activity.
Mechanically Strong Heterogeneous Catalysts via Immobilization of Powderous Catalysts to Porous Plastic Tablets
Li, Tingting,Xu, Bo
supporting information, p. 2673 - 2678 (2021/08/03)
Main observation and conclusion: We describe a practical and general protocol for immobilization of heterogeneous catalysts to mechanically robust porous ultra-high molecular weight polyethylene tablets using inter-facial Lifshitz-van der Waals Interactions. Diverse types of powderous catalysts, including Cu, Pd/C, Pd/Al2O3, Pt/C, and Rh/C have been immobilized successfully. The immobilized catalysts are mechanistically robust towards stirring in solutions, and they worked well in diverse synthetic reactions. The immobilized catalyst tablets are easy to handle and reused. Moreover, the metal leaching of immobilized catalysts was reduced significantly.
Atomic origins of the strong metal-support interaction in silica supported catalysts
He, Dongsheng,He, Jiaqing,Li, Yan,Lin, Lili,Liu, Tianhui,Sheng, Jian,Wang, Lei,Wang, Rongming,Wang, Wu,Yang, Feng,Zhang, Lei,Zhao, Haofei,Zhu, Sheng
, p. 12651 - 12660 (2021/10/19)
Silica supported metal catalysts are most widely used in the modern chemical industry because of the high stability and tunable reactivity. The strong metal-support interaction (SMSI), which has been widely observed in metal oxide supported catalysts and significantly affects the catalytic behavior, has been speculated to rarely happen in silica supported catalysts since silica is hard to reduce. Here we revealed at the atomic scale the interfacial reaction induced SMSI in silica supported Co and Pt catalysts under reductive conditions at high temperature using aberration-corrected environmental transmission electron microscopy coupled with in situ electron energy loss spectroscopy. In a Co/SiO2 system, the amorphous SiO2 migrated onto the Co surface to form a crystallized quartz-SiO2 overlayer, and simultaneously an interlayer of Si was generated in-between. The metastable crystalline SiO2 overlayer subsequently underwent an order-to-disorder transition due to the continuous dissociation of SiO2 and the interfacial alloying of Si with the underlying Co. The SMSI in the Pt-SiO2 system was found to remarkably boost the catalytic hydrogenation. These findings demonstrate the universality of the SMSI in oxide supported catalysts, which is of general importance for designing catalysts and understanding catalytic mechanisms.
A mild and selective Cu(II) salts-catalyzed reduction of nitro, azo, azoxy, N-aryl hydroxylamine, nitroso, acid halide, ester, and azide compounds using hydrogen surrogacy of sodium borohydride
Kalola, Anirudhdha G.,Prasad, Pratibha,Mokariya, Jaydeep A.,Patel, Manish P.
supporting information, p. 3565 - 3589 (2021/10/12)
The first mild, in situ, single-pot, high-yielding well-screened copper (II) salt-based catalyst system utilizing the hydrogen surrogacy of sodium borohydride for selective hydrogenation of a broad range of nitro substrates into the corresponding amine under habitancy of water or methanol like green solvents have been described. Moreover, this catalytic system can also activate various functional groups for hydride reduction within prompted time, with low catalyst-loading, without any requirement of high pressure or molecular hydrogen supply. Notably, this system explores a great potential to substitute expensive traditional hydrogenation methodologies and thus offers a greener and simple hydrogenative strategy in the field of organic synthesis.
Manganese Catalyzed Hydrogenation of Azo (N=N) Bonds to Amines
Ben-David, Yehoshoa,Das, Uttam Kumar,Diskin-Posner, Yael,Kar, Sayan,Milstein, David
supporting information, p. 3744 - 3749 (2021/07/09)
We report the first example of homogeneously catalyzed hydrogenation of the N=N bond of azo compounds using a complex of an earth-abundant-metal. The hydrogenation reaction is catalyzed by a manganese pincer complex, proceeds under mild conditions, and yields amines, which makes this methodology a sustainable alternative route for the conversion of azo compounds. A plausible mechanism involving metal-ligand cooperation and hydrazine intermediacy is proposed based on mechanistic studies. (Figure presented.).
Unlocking Amides through Selective C–N Bond Cleavage: Allyl Bromide-Mediated Divergent Synthesis of Nitrogen-Containing Functional Groups
Govindan, Karthick,Chen, Nian-Qi,Chuang, Yu-Wei,Lin, Wei-Yu
supporting information, p. 9419 - 9424 (2021/11/30)
We report a new set of reactions based on the unlocking of amides through simple treatment with allyl bromide, creating a common platform for accessing a diverse range of nitrogen-containing functional groups such as primary amides, sulfonamides, primary amines, N-acyl compounds (esters, thioesters, amides), and N-sulfonyl esters. The method has potential industrial applicability, as demonstrated through gram-scale syntheses in batch and in a continuous flow system.
