Welcome to LookChem.com Sign In|Join Free

CAS

  • or

87-86-5

Post Buying Request

87-86-5 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

87-86-5 Usage

Chemical Properties

Different sources of media describe the Chemical Properties of 87-86-5 differently. You can refer to the following data:
1. Pentachlorophenol is also called pe-nta, Dowicide 49-162, PCP or Santophen20. This product is white needle crystal. It is difficult to dissolve in water and soluble in most organic solvents, such as ethanol, acetone, ether, but not in carbon tetrachloride and paraffin hydrocarbon,acidic. Without the presence of moisture, it is not corrosive to most metals and its dissociation constant value is 1.2 x 10-5 at 25℃. Incompatible with strong oxidizing agents. With high stability, it did not catch on fire in the air when the test temperature reached 200℃.? Pentachlorophenol is obtained directly by chlorination using phenol as a raw material, AlCl3 and FeCl3 as the catalyst with the temperature varying from 100℃ to 180℃.It is also obtained with sodium pentachlorophenol, which prepared with 666 invalid body as raw material through high pressure hydrolysis, by acidification. It is mainly used as herbicide in paddy fields, antimicrobial preservative and fungicide for textiles, leather, paper and wood. The general dosage is 0.1% ~ 0.5%. It has the function to eliminate the fungi, termites, Oncomelania hupensis and so on. It can be used in industrial circulating cooling water to control its algae, fungi, bacteria and industrial clay. Because of its high toxicity (oral in rats LD50 146~175mg/kg, fish poison 2×10-7~ 6×10-7) and easy water environmental pollution, it has been used less in water treatment in recent years.
2. Pentachlorophenol is a colorless to white, crystalline solid. It has a benzene-like odor; pungent when hot. The Odor Threshold in water is 1600 μg/L and the taste threshold in water is 30 μg/L.

Description

Pentachlorophenol is a restricted use pesticide and is used industrially as a wood preservative for utility poles, railroad ties, and wharf pilings. Pentachlorophenol was widely used as wood preservative until 1987 when its use was restricted to certified applicators. Pentachlorophenol is considered a probable human carcinogen and exposure to high levels can also have other health risks. Pentachlorophenol is a synthetic substance, made from other chemicals, and does not occur naturally in the environment. It is made by only one company in the United States. At one time, it was one of the most widely used biocides in the United States. Since 1984, the purchase and use of pentachlorophenol has been restricted to certified applicators. It is no longer available to the general public. Application of pentachlorophenol in the home as an herbicide and pesticide accounted for only 3% of its consumption in the 1970s. Before use restrictions, pentachlorophenol was widely used as a wood preservative. It is now used industrially as a wood preservative for power line poles, cross arms, fence posts, and the like. Pure pentachlorophenol exists as colorless crystals. It has a very sharp characteristic phenolic smell when hot but very little odor at room temperature. Most people can begin to smell pentachlorophenol in water at less than 12 parts pentachlorophenol per million parts of water (ppm). Impure pentachlorophenol (the form usually found at hazardous waste sites) is dark gray to brown and exists as dust, beads, or flakes. Pentachlorophenol can be found in two forms: pentachlorophenol itself or as the sodium salt of pentachlorophenol. The sodium salt dissolves easily in water, but pentachlorophenol does not. These two forms have some different physical properties, but are expected to have similar toxic effects. Humans are generally exposed to technical-grade pentachlorophenol, which usually contains such toxic impurities as polychlorinated dibenzo- p-dioxins and dibenzofurans.

Physical properties

White flakes or needles with a phenolic odor. At 40 °C, the average odor threshold concentration and the lowest concentration at which an odor was detected were 23 and 9.3 μg/L, respectively. At 25 °C, the lowest concentration at which a taste was detected was 8 μg/L (Young et al., 1996).

Uses

Different sources of media describe the Uses of 87-86-5 differently. You can refer to the following data:
1. Pentachlorophenol is used to control termites and, as the laurate ester, wood boring insects. The ester and the sodium salt are used to protect wood from fungal rot and as general herbicides and defoliants. The sodium salt is also used as a general disinfectant.
2. Pentachlorophenol (PCP) is used for termite control, asa defoliant, and in the preservation of wood and wood products. It is an indoor air pollutant. It has been detected in timbers in the ppm range, causing contamination of air, surfaces, and materials in the homes. Its concentrations in blood samples have been reported in the range of sub-ppb to 110 μ/kg (Ruh et al. 1984). It has been detected in flue gas at 760–870°C (1400–1598°F) exit temperature from an incinerator at a concentration of 1.033 mg/m3 (Guinivan et al. 1985). The incinerator burned pentachlorophenol-treated wooden ammunition boxes and there was no afterburning. Methyl ethers of pentachlorophenol—pentachloroanisole and tetrachlorohydroquinone dimethyl ether —formed from microbial methylation of pentachlorophenol have been identified in the pg/m3 range in marine air samples from both the northern and southern hemispheres (Atlas et al. 1986)..
3. Pentachlorophenol (PCP) is an odourless, white or light brown powder or crystal in appearance. It is used as herbicide and fungicide. Pentachlorophenol is incompatible with strong oxidising agents. Pentachlorophenol has a very sharp characteristic phenolic smell when hot but very little odour at room temperature. Pentachlorophenol is a synthetic substance made from other chemicals and does not occur naturally in the environment. Initially pentachlorophenol was widely used as a wood preservative. It is now used industrially as a wood preservative for power line poles, cross arms, fence post, etc. Used as insecticide for terminate control; pre-harvest defoliant; general herbicide. Antimicrobial preservative and fungicide for wood, wood products, starches, textiles, paints, adhesives, leather, pulp, paper, industrial waste systems, building materials. Surface disinfectant.
4. .Insecticide; fungicide; herbicide.

Definition

ChEBI: A chlorophenol that is phenol substituted by 5 chloro groups.

Production Methods

Pentachlorophenol can be produced by the chlorination of phenol in the presence of AlCl3, or by hydrolysis of hexachlorobenzene with NaOH in methanol.

General Description

A white crystalline solid. Slightly soluble in water. Noncombustible. Toxic by inhalation, ingestion, and skin absorption. Used as a fungicide and as a wood preservative.

Air & Water Reactions

Slightly soluble in water.

Reactivity Profile

Pentachlorophenol may react with strong oxidizing agents. Incompatible with strong bases, acid chlorides and acid anhydrides. Forms salts with alkaline metals. Solutions in oil cause natural rubber to deteriorate, but synthetic rubber may be used in equipment and for protective clothing .

Health Hazard

Different sources of media describe the Health Hazard of 87-86-5 differently. You can refer to the following data:
1. Dust or vapor irritates skin and mucous membranes, causing coughing and sneezing. Ingestion causes loss of appetite, respiratory difficulties, anesthesia, sweating, coma. Overexposure can cause death.
2. Pentachlorophenol is a severe acute toxicant by ingestion and dermal penetration. The compound and its alkali salts can produce local and systemic effects. The symptoms of acute toxicity are headache, dizziness, sweating, nausea, vomiting, dyspnea, chest pain, weakness, fever, collapse, convulsions, and heart failure. Inhalation of its dusts or vapors can cause irritation of the eyes, nose, and throat, and coughing and sneezing. There is no evidence of chronic poisoning or any cumulative effects.LD50 value, oral (mice): 117 mg/kg LD50 value, skin (rats): 96 mg/kg Subacute toxicity studies on rats orally administered pentachlorophenol at a dose of 0.2 mmol/kg/day for 28 days showed no effect on growth. However, this treatment induced cell alterations in liver and changes in relative liver weights (Renner et al. 1987).Fathead minnows exposed to 8–130 g/L of pentachlorophenol for 90 days experienced no adverse effects on their survival, growth, or bone development (Hamilton et al. 1986). Fathead minnows exposed to 8–130 g/L of pentachlorophenol for 90 days experienced no adverse effects on their survival, growth, or bone development (Hamilton et al. 1986). McKim and associates (1986) have conducted aquatic toxicokinetic studies using 14C-labeled pentachlorophenol in rainbow trouts. At sublethal doses and over its 65hour half-life period, about 50% was eliminated over the gills, 30% in the feces and bile, and 20% in the urine. It was found that pentachlorophenol and its metabolites were rapidly eliminated from the bodies of fish .McKim and associates (1986) have conducted aquatic toxicokinetic studies using 14C-labeled pentachlorophenol in rainbow trouts. At sublethal doses and over its 65hour half-life period, about 50% was eliminated over the gills, 30% in the feces and bile, and 20% in the urine. It was found that pentachlorophenol and its metabolites were rapidly eliminated from the bodies of fish.

Fire Hazard

Special Hazards of Combustion Products: Generates toxic and irritating vapors.

Agricultural Uses

Fungicide, Herbicide, Slimicide, Wood preservative: Pentachlorophenol (PCP) is a commercially produced insecticide, fungicide, and slimicide. Since 1984 it has been restricted to certified applicators and is no longer available to the general public. It is primarily used to protect timber from fungal rot and wood-boring insects, but may also be used as a pre-harvest defoliant in cotton, a general pre-emergence herbicide, and as a biocide in industrial water systems. Not approved for use in EU countries. Not registered for use in the U.S. There are 48 global suppliers.

Trade name

(The U.S. EPA lists 626 active and canceled/ transferredlabelsforthischemical) CHEM-TOL?; CHLON?; CHLOROPHEN?; CRYPTOGIL OL?; DOWCIDE? 7; DOWICIDE? 7; DOW PENTACHLOROPHENOL DP-2 ANTIMICROBIAL?; DURA TREET II?; DUROTOX?; EP 30?; FORPEN-50?; FUNGIFEN?; GLAZDPENTA ?; GRUNDIER ARBEZOL?; LAUXTOL?; LIROPREM?; ONTRACK WE HERBICIDE?; ORTHO TRIOX?; OSMOSE WPC?; PENTACHLOROPHENOL, DOWICIDE EC-7?; PENTACHLOROPHENOL, DP- 2?; PENTACON?; PENTA-KIL?; PENTA READY?; PENTASOL?; PENWAR?; PERATOX?; PERMACIDE?; PERMAGARD?; PERMASAN?; PERMATOX DP- 2?PERMATOX PENTA?; PERMITE?; POL NU?; PREVENTOL P?; PRILTOX?; SANTOBRITE?; SANTOPHEN?; SINITUHO?; TERM-I-TROL?; THOMPSON'S WOOD FIX?; WATERSHED WP?; WEEDONE?; WOODTREAT A?

Safety Profile

Confirmed human carcinogen with experimental tumorigenic data. Human poison by ingestion. Poison experimentally by ingestion, skin contact, intraperitoneal, and subcutaneous routes. An experimental teratogen. Other experimental reproductive effects. A skin irritant. Mutation data reported. Acute poisoning is marked by weakness with changes in respiration, blood pressure, and urinary output. Also causes dermatitis, convulsions, and collapse. Chronic exposure can cause liver and hdney injury. Dangerous; when heated to decomposition it emits highly toxic fumes of Cl-. See also CHLOROPHENOLS

Potential Exposure

Pentachlorophenol (PCP) is a commercially produced bactericide, fungicide, and slimicide used primarily for the preservation of wood, wood products; and other materials. As a chlorinated hydrocarbon, its biological properties have also resulted in its use as an herbicide, and molluscicide. Two groups can be expected to encounter the largest exposures. One involves the small number of employees involved in the manufacture of PCP. All of these are presently under industrial health surveillance programs. The second and larger group are the formulators and wood theaters. Exposure, hygiene and industrial health practices can be expected to vary from the small theaters to the larger companies. The principal use as a wood preservative results in both point source water contamination at manufacturing and wood preservation sites and, conceivably, nonpoint source water contamination through runoff wherever there are PCP-treated lumber products exposing PCP to soil

Carcinogenicity

The IARC has determined that there is limited evidence for carcinogenicity in humans and sufficient evidence of carcinogenicity in experimental animals.

Environmental Fate

Biological. Under aerobic conditions, microbes in estuarine water partially dechlorinated pentachlorophenol to trichlorophenol (Hwang et al., 1986). The disappearance ofpentachlorophenol was studied in four aquaria with and without mud under aerobic and anaerobic conditions. Potential biological and/or chemical products identified include pentachloroanisole, 2,3,4,5-, 2,3,4,6- and 2,3,5,6-tetrachlorophenol (Boyle et al.,Pentachlorophenol degraded in anaerobic sludge to 3,4,5-trichlorophenol which was further reduced to 3,5-dichlorophenol (Mikesell and Boyd, 1985). In activated sludge, only 0.2% of the applied amount was mineralized to carbon dioxide after 5 days (FreitagPentachlorophenol was statically incubated in the dark at 25°C with yeast extract and settled domestic wastewater inoculum. Significant biooxidation was observed but with a gradual adaptation over a 14-day period to achieve complete degradation at 5 mg/L substrate cultures. At a concentration of 10 mg/L, it took 28 days for pentachlorophenol to degrade completely (Tabak et al., 1981).Melcer and Bedford (1988) studied the fate of pentachlorophenol in municipal activated sludge reactor systems that were operated at solids retention times of 10 to 20 days and hydraulic retention times of 120 days. Under these conditions, pentachloropheno

Metabolic pathway

The insecticidal, antimicrobial and fungicidal properties of pentachlorophenol were discovered some time ago and the compound was first used in the 1930s for wood preservation and treatment. This and various industrial uses and its herbicidal and molluscicidal properties have led to its widespread use. Many countries have banned the use of pentachlorophenol as a wood preservative. Its main uses are now in cooling towers, paper mills and drilling muds (Litchfield and Rao, 1998). The compound has become distributed in various ecosystems, including those close to man’s living space. It is volatile and it may be absorbed via ingestion, inhalation or skin contact. There exists a very large literature on the toxicology, metabolism, persistence and environmental effects and fate of pentachlorophenol, with well over 500 papers published in the last 30 years. Pentachlorophenol is rapidly and completely decomposed in sunlight; it is biodegraded in soil and plants and it is metabolised in animals. Pathways include dechlorination, methylation, oxidation, conjugation with sugars and sulfate and ring scission. The environmental fate and metabolism of pentachlorophenol were reviewed in 1986 by Engelhardt et al. (1986) and Renner and Muecke (1986). The pathways reported below are largely taken from these papers which are supported by more than 120 references. Other selected papers which cover important aspects are also quoted. The microbial degradation of the compound, particularly in relation to waste clean-up, has been reviewed recently (Litchfield and Rao, 1998).

Metabolism

Pentachlorophenol was metabolized in rats by conjugation with glucuronic acid and eliminated as the glucuronide. P450 catalyzed oxidative dechlorination also occurred to form tetrachlorohydroquinone, and this was conjugated to form a monoglucuronide representing 27% of the dose administered. Other metabolites have been reported, including isomeric tetrachlorophenols, tetrachlorocatechol and tetrachlororesorcinol. Trace amounts of benzoquinones were also noted. Metabolites in female rats were tetrachloromonophenols, diphenols, and hydroquinones.

Solubility in organics

At 20 °C (g/100 g solution): methanol (57.0), anhydrous ethanol (53.0), 95% ethanol (47.5), diethylene glycol monomethyl ether (48.0), pine oil (32.0), diethylene glycol monoethyl ether (30.0), diethylene glycol (27.5), 2-ethoxyethanol (27.0), dioxane (11.5), benzene (11.0), ethylene glycol (6.0), diesel oil (3.1), fuel oil (2.6) (Carswell and Nason, 1938).

Solubility in water

At 20 °C (g/100 g solution): methanol (57.0), anhydrous ethanol (53.0), 95% ethanol (47.5), diethylene glycol monomethyl ether (48.0), pine oil (32.0), diethylene glycol monoethyl ether (30.0), diethylene glycol (27.5), 2-ethoxyethanol (27.0), dioxane (11.5), benzene (11.0), ethylene glycol (6.0), diesel oil (3.1), fuel oil (2.6) (Carswell and Nason, 1938).

Shipping

UN3155 Pentachlorophenol, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.

Purification Methods

Crystallise it twice from toluene/EtOH. Sublime it in vacuo.[Beilstein 6 IV 1025.]

Toxicity evaluation

The toxicology has been addressed in a recent risk assessment (119). Acutely, pentachlorophenol was reported to have LD50 values in the rat of 12 mg/kg (inhalation) and 146 mg/kg (M)–175 mg/kg (F) by oral gavage. More detailed studies of the toxicology of pentachlorophenol have been compromised by the toxicity of impurities present in most of the earlier samples used in the evaluation process.Although a number of toxicity studies have been conducted with both known impurities and TCHQ, it is often difficult to know whether animal experiments are valid for human health risk assessment. Nevertheless, it appears that the main target organ of purified TCP in animals is the liver.This toxicity was manifested as liver inflammation, increased relative weight, and increased serum alkaline phosphatase. The estimated chronic NOEL in the dog for these effects was 0.15 mg/kg/day, from a 1-year study, based on a LOEL of 1.5 mg/kg/day. In the rat, a significantly increased incidence of mesotheliomas (p<0.05) and nasal carcinomas in males was reported at the highest dose tested, ~60 mg/kg/day.

Degradation

Pentachlorophenol has the typical weak acidic properties of a phenol, readily forming the sodium salt. At physiological pH a major proportion is ionised and the metabolism (but not necessarily the mobility and absorption) of pentachlorophenol and its sodium salt should be very similar. The laurate ester, being lipophilic, is absorbed more readily than the phenate ion and it is also more volatile. However, the ester should be readily hydrolysed in dilute base to pentachlorophenol and lauric acid and by estersases in vivo to the same products. Thus the metabolism of the three forms may be considered together. Pentachlorophenol is rapidly degraded under conditions of aqueous photolysis in W light and sunlight (Engelhardt et al., 1986). Products detected (Scheme 1) include the reductive dechlorination products 2,3,4,6- and 2,3,5,6-tetrachlorophenol (2 and 3) and trichlorophenols. Ring chlorine atoms were displaced by hydroxyl groups to afford 2,3,5,6-tetrachlorohydroquinone (4), tetrachlorocatechol (5) and tetrachlororesorcinol( 6). The hydroquinone (4) was very rapidly decomposed in air. Irradiation of each of 4, 5 and 6 afforded trichlorobenzenediols, trichloroquinones and 2,3-dichloromaleic acid (7). Hydroquinone 4 oxidised in the dark (and in light) to 2,3,5,6- tetrachloro-l,4-benzoquinone (8), the 2-hydroxy analogue (9), the dichlorohydroxybenzoquinone (10) and the maleic acid (7). The latter eventually affords CO2 and HCl. Exposure of an aqueous solution of the sodium salt to sunlight gave small amounts of octachlorodibenzodioxin but none of the extremely toxic 2,3,7,8-tetrachloro derivative could be detected. Much of the original work on the photolysis of pentachlorophenol was reported by Wong and Crosby (1978).

Incompatibilities

Reacts violently with strong oxidizers, acids, alkalies, and water.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office. Incineration (600°to 900°C) coupled with acequate scrubbing and ash disposal facilities. Alternatively pentachlorophenol

Check Digit Verification of cas no

The CAS Registry Mumber 87-86-5 includes 5 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 2 digits, 8 and 7 respectively; the second part has 2 digits, 8 and 6 respectively.
Calculate Digit Verification of CAS Registry Number 87-86:
(4*8)+(3*7)+(2*8)+(1*6)=75
75 % 10 = 5
So 87-86-5 is a valid CAS Registry Number.
InChI:InChI=1/C6HCl5O/c7-1-2(8)4(10)6(12)5(11)3(1)9/h12H

87-86-5SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 18, 2017

Revision Date: Aug 18, 2017

1.Identification

1.1 GHS Product identifier

Product name pentachlorophenol

1.2 Other means of identification

Product number -
Other names pentachloro-phenol

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only. Nitrosamines/ethers/alcohols, Pesticides (chemicals used for killing pests, such as rodents, insects, or plants), Phenols/phenoxy acids
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:87-86-5 SDS

87-86-5Synthetic route

phenol
108-95-2

phenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,3,4,6-tetrachlorophenol
58-90-2

2,3,4,6-tetrachlorophenol

Conditions
ConditionsYield
With chlorine; aluminum (III) chloride at 100 - 180℃; for 10.8333h; Product distribution / selectivity;A 83%
B 10%
With chlorine; nickel; aluminum (III) chloride at 90 - 180℃; for 10h; Product distribution / selectivity;A 79%
B 20%
2,4,6-Trichlorophenol
88-06-2

2,4,6-Trichlorophenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,3,4,6-tetrachlorophenol
58-90-2

2,3,4,6-tetrachlorophenol

Conditions
ConditionsYield
With chlorine; nickel; aluminum (III) chloride at 90 - 180℃; for 4.16667 - 4.66667h; Product distribution / selectivity;A 80%
B 10%
Stage #1: 2,4,6-Trichlorophenol With chlorine; aluminum (III) chloride at 105 - 183℃;
Stage #2: With phenol at 180 - 190℃; Product distribution / selectivity;
A 80%
B 10%
With chlorine; aluminum (III) chloride at 105 - 190℃; for 3.66667 - 4.83333h; Product distribution / selectivity;A 77%
B 10%
pentachlorophenol-TMS
62269-80-1

pentachlorophenol-TMS

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With nano magnetic sulfated zirconia (Fe3O4 at ZrO2/SO42-) In neat (no solvent) at 20℃; for 0.833333h; Green chemistry;80%
2,3,4,5,6-pentachloro-4-(pentachlorophenoxy)-2,5-cyclohexadienone
17540-48-6

2,3,4,5,6-pentachloro-4-(pentachlorophenoxy)-2,5-cyclohexadienone

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,3,5,6-tetrachloro-4-(2,3,4,5,6-pentachlorophenoxy)phenol
21567-21-5

2,3,5,6-tetrachloro-4-(2,3,4,5,6-pentachlorophenoxy)phenol

C

3,4,5,6-tetrachloro-2-(2,3,4,5,6-pentachlorophenoxy)phenol
35245-80-8

3,4,5,6-tetrachloro-2-(2,3,4,5,6-pentachlorophenoxy)phenol

Conditions
ConditionsYield
With sodium tetrahydroborate In methanol; benzene for 1h; Ambient temperature;A 4 % Chromat.
B 52.6%
C 26 % Chromat.
Quintozene
82-68-8

Quintozene

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With sodium hydroxide In water for 3h; Heating;50%
tetrachloromethane
56-23-5

tetrachloromethane

3-Iodophenol
626-02-8

3-Iodophenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,4,6-trichloro-3-iodo-phenol
846042-42-0

2,4,6-trichloro-3-iodo-phenol

C

2,3,4,6-tetrachloro-5-iodo-phenol

2,3,4,6-tetrachloro-5-iodo-phenol

Conditions
ConditionsYield
at 60 - 70℃; Einleiten von Chlor;
3,5-dihydroxyphenol
108-73-6

3,5-dihydroxyphenol

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With chlorosulfonic acid at 150 - 160℃;
ethanol
64-17-5

ethanol

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one
599-52-0

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one

Pentachlorophenol
87-86-5

Pentachlorophenol

4-Iodophenol
540-38-5

4-Iodophenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

tetrachloroiodophenol

tetrachloroiodophenol

Conditions
ConditionsYield
With tetrachloromethane; chlorine at 50℃;
3,5-dichlorophenol
591-35-5

3,5-dichlorophenol

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With chlorine
hexachlorobenzene
118-74-1

hexachlorobenzene

sodium methylate
124-41-4

sodium methylate

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

Pentachloroanisole
1825-21-4

Pentachloroanisole

Conditions
ConditionsYield
at 180℃; im Rohr;
at 180℃; im Rohr;
hexachlorobenzene
118-74-1

hexachlorobenzene

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With sodium hydroxide; glycerol at 250 - 280℃;
With sodium hydroxide at 250℃;
With sodium hydroxide; tert-butyl alcohol at 135℃;
With sodium hydroxide; ethylene glycol at 200℃;
With sodium hydroxide at 135℃;
hexachlorobenzene
118-74-1

hexachlorobenzene

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

Pentachloroanisole
1825-21-4

Pentachloroanisole

Conditions
ConditionsYield
With sodium methylate at 180℃; im Rohr;
3-Iodophenol
626-02-8

3-Iodophenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,3,4,6-tetrachloro-5-iodo-phenol

2,3,4,6-tetrachloro-5-iodo-phenol

Conditions
ConditionsYield
With tetrachloromethane at 60 - 70℃; Einleiten von Chlor;
2,3,4,5-tetrachlorophenol
4901-51-3

2,3,4,5-tetrachlorophenol

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With aluminium trichloride; chlorine; iron at 120 - 195℃;
2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one
599-52-0

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With hydrogenchloride; acetic acid; tin(ll) chloride
With carbon disulfide; aluminium trichloride; acetyl chloride Verseifung des Reaktionsprodukts;
With potassium iodide
2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one
599-52-0

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

chloranil
118-75-2

chloranil

Conditions
ConditionsYield
With hydrogenchloride
With aluminium trichloride at 160℃; im Druckrohr;
2,3,4,4,5,5,6,6-octachloro-2-cyclohexenone
4024-81-1

2,3,4,4,5,5,6,6-octachloro-2-cyclohexenone

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
durch Reduktion;
2,3,4,4,5,6,6-heptachloro-cyclohex-2-enone
7462-04-6

2,3,4,4,5,6,6-heptachloro-cyclohex-2-enone

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With acetone
With potassium acetate; acetic acid
With sodium acetate; acetic acid
2,3,4,5,6-pentachloroaniline
527-20-8

2,3,4,5,6-pentachloroaniline

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With sulfuric acid; sodium nitrite at 180℃;
2,4,6-trichloro-3-iodo-phenol
846042-42-0

2,4,6-trichloro-3-iodo-phenol

A

Pentachlorophenol
87-86-5

Pentachlorophenol

B

2,3,4,6-tetrachloro-5-iodo-phenol

2,3,4,6-tetrachloro-5-iodo-phenol

Conditions
ConditionsYield
With tetrachloromethane at 60 - 70℃; Einleiten von Chlor;
4,5,6-trihydroxy-benzene-1,3-disulfonic acid
38983-95-8

4,5,6-trihydroxy-benzene-1,3-disulfonic acid

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With thionyl chloride at 100℃; im Rohr;
2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one
599-52-0

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one

ethylene glycol
107-21-1

ethylene glycol

Pentachlorophenol
87-86-5

Pentachlorophenol

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one
599-52-0

2,3,4,4,5,6-hexachlorocyclohexa-2,5-dien-1-one

acetic acid
64-19-7

acetic acid

Pentachlorophenol
87-86-5

Pentachlorophenol

2,3,4,4,5,6,6-heptachloro-cyclohex-2-enone
7462-04-6

2,3,4,4,5,6,6-heptachloro-cyclohex-2-enone

potassium acetate
127-08-2

potassium acetate

acetic acid
64-19-7

acetic acid

Pentachlorophenol
87-86-5

Pentachlorophenol

hydroquinone
123-31-9

hydroquinone

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With chlorosulfonic acid at 150 - 160℃;
2,4,6-Trichlorophenol
88-06-2

2,4,6-Trichlorophenol

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With antimony(III) chloride; chlorine at 200 - 220℃;
With aluminium trichloride; chlorine; 1,2-dichloro-ethane at 70 - 85℃;
With aluminium trichloride; chlorine; 1,1,2,2-tetrachloroethane at 70 - 85℃;
With tetrachloromethane; chlorine; iron(III) chloride at 20 - 25℃;
With aluminium trichloride; chlorine at 100 - 190℃;
2-hydroxyresorcinol
87-66-1

2-hydroxyresorcinol

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With chlorosulfonic acid at 150℃;
benzene
71-43-2

benzene

Pentachlorophenol
87-86-5

Pentachlorophenol

Conditions
ConditionsYield
With hydrogenchloride; acetic acid Electrolysis;
Pentachlorophenol
87-86-5

Pentachlorophenol

Succinic acid mono-[(2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(4-hydroxy-2-oxo-2H-pyrimidin-1-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl] ester
102386-32-3

Succinic acid mono-[(2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(4-hydroxy-2-oxo-2H-pyrimidin-1-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl] ester

Succinic acid (2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(4-hydroxy-2-oxo-2H-pyrimidin-1-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl ester pentachlorophenyl ester

Succinic acid (2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(4-hydroxy-2-oxo-2H-pyrimidin-1-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl ester pentachlorophenyl ester

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide In N,N-dimethyl-formamide for 16h; Ambient temperature;100%
2-methoxy-succinic acid 1-(6-tert-butoxycarbonylamino-hexyl) ester
680981-19-5

2-methoxy-succinic acid 1-(6-tert-butoxycarbonylamino-hexyl) ester

Pentachlorophenol
87-86-5

Pentachlorophenol

pentachlorophenyl N-tert-butoxycarbonyl-3-methoxy-4-oxo-5-oxy-11-aminoundecanoate
680981-21-9

pentachlorophenyl N-tert-butoxycarbonyl-3-methoxy-4-oxo-5-oxy-11-aminoundecanoate

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide In ethyl acetate at 20℃; for 120h;100%
(E)-[2-(phenylazo)phenyl]diphenylphosphine
865623-19-4

(E)-[2-(phenylazo)phenyl]diphenylphosphine

Pentachlorophenol
87-86-5

Pentachlorophenol

C6Cl5O(1-)*C24H20N2P(1+)
1374254-19-9

C6Cl5O(1-)*C24H20N2P(1+)

Conditions
ConditionsYield
In tetrahydrofuran at -60℃;100%
Pentachlorophenol
87-86-5

Pentachlorophenol

α-bromoacetophenone
70-11-1

α-bromoacetophenone

2-pentachlorophenyloxy-1-phenyl-ethanone

2-pentachlorophenyloxy-1-phenyl-ethanone

Conditions
ConditionsYield
Stage #1: Pentachlorophenol With potassium carbonate In butanone at 20℃; for 0.25h;
Stage #2: α-bromoacetophenone In butanone at 80℃;
100%
Pentachlorophenol
87-86-5

Pentachlorophenol

acetic anhydride
108-24-7

acetic anhydride

pentachlorophenyl acetate
1441-02-7

pentachlorophenyl acetate

Conditions
ConditionsYield
With silver trifluoromethanesulfonate at 60℃; for 0.0833333h; neat (no solvent);99%
With dicyclohexyl-carbodiimide In acetonitrile at 25℃; for 1h;91%
With sodium acetate
Pentachlorophenol
87-86-5

Pentachlorophenol

pentachlorobenzenesulfonic anhydride
39206-48-9

pentachlorobenzenesulfonic anhydride

A

pentachlorobenzene
608-93-5

pentachlorobenzene

B

pentachlorobenzenesulfonic acid
40707-29-7

pentachlorobenzenesulfonic acid

C

pentachlorophenyl pentachlorobenzenesulfonate

pentachlorophenyl pentachlorobenzenesulfonate

Conditions
ConditionsYield
at 200 - 210℃; for 0.5h;A 32%
B 99%
C 39%
Pentachlorophenol
87-86-5

Pentachlorophenol

Succinic acid mono-[3-[bis-(4-methoxy-phenyl)-phenyl-methoxy]-2-(5-methyl-2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-ylmethoxy)-propyl] ester
120188-25-2

Succinic acid mono-[3-[bis-(4-methoxy-phenyl)-phenyl-methoxy]-2-(5-methyl-2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-ylmethoxy)-propyl] ester

1-<<2-dimethoxytrityl-hydroxy-1-(pentachlorophenylsuccinyl-hydroxy-methyl)ethoxy>-methyl>thymine
120188-26-3

1-<<2-dimethoxytrityl-hydroxy-1-(pentachlorophenylsuccinyl-hydroxy-methyl)ethoxy>-methyl>thymine

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide99%
Pentachlorophenol
87-86-5

Pentachlorophenol

Diphenyliodonium triflate
66003-76-7

Diphenyliodonium triflate

2,3,4,5,6-Pentachlorobiphenyl ether
22274-42-6

2,3,4,5,6-Pentachlorobiphenyl ether

Conditions
ConditionsYield
Stage #1: Pentachlorophenol With potassium tert-butylate In tetrahydrofuran at 0℃; for 0.25h;
Stage #2: Diphenyliodonium triflate In tetrahydrofuran at 40℃; for 2h;
99%
Stage #1: Pentachlorophenol With potassium tert-butylate In tetrahydrofuran at 0℃; for 0.25h;
Stage #2: Diphenyliodonium triflate In tetrahydrofuran at 40℃; for 2h;
99%
Pentachlorophenol
87-86-5

Pentachlorophenol

tri-p-fluorophenylstibine
33756-42-2

tri-p-fluorophenylstibine

bis(2,3,4,5,6-pentachlorophenoxy)tris(4-fluorophenyl)antimony

bis(2,3,4,5,6-pentachlorophenoxy)tris(4-fluorophenyl)antimony

Conditions
ConditionsYield
With tert.-butylhydroperoxide In diethyl ether; water at 20℃; for 24h;99%
Pentachlorophenol
87-86-5

Pentachlorophenol

1,2,2,2-tetrachloroethyl chloroformate
98015-53-3

1,2,2,2-tetrachloroethyl chloroformate

pentachlorophenyl 1,2,2,2-tetrachloroethyl carbonate
107960-04-3

pentachlorophenyl 1,2,2,2-tetrachloroethyl carbonate

Conditions
ConditionsYield
With pyridine In dichloromethane for 3h; Ambient temperature;98%
Pentachlorophenol
87-86-5

Pentachlorophenol

Succinic acid mono-[(2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(6-hydroxy-2-isobutyrylamino-purin-9-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl] ester
102386-34-5

Succinic acid mono-[(2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(6-hydroxy-2-isobutyrylamino-purin-9-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl] ester

Succinic acid (2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(6-hydroxy-2-isobutyrylamino-purin-9-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl ester pentachlorophenyl ester

Succinic acid (2R,3R,4R,5R)-2-[bis-(4-methoxy-phenyl)-phenyl-methoxymethyl]-5-(6-hydroxy-2-isobutyrylamino-purin-9-yl)-4-(tetrahydro-furan-2-yloxy)-tetrahydro-furan-3-yl ester pentachlorophenyl ester

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide In N,N-dimethyl-formamide for 16h; Ambient temperature;98%
Pentachlorophenol
87-86-5

Pentachlorophenol

A

cyclohexanol
108-93-0

cyclohexanol

B

phenol
108-95-2

phenol

Conditions
ConditionsYield
With nickel dichloride; RedAl In tetrahydrofuran at 68℃; for 2h; Product distribution; other dehalogenating systems, other reaction times and temperatures;A n/a
B 98%
Pentachlorophenol
87-86-5

Pentachlorophenol

Ru(CH2C(CH3)CH2)2(((CH3)2CH)2PCH2P(C6H5)2)
309965-65-9

Ru(CH2C(CH3)CH2)2(((CH3)2CH)2PCH2P(C6H5)2)

Ru(OC6Cl5)2(((CH3)2CH)2PCH2P(C6H5)2)
309965-71-7

Ru(OC6Cl5)2(((CH3)2CH)2PCH2P(C6H5)2)

Conditions
ConditionsYield
In toluene (Ar); stirring a soln. of ruthenium complex and pentachlorophenol in toluene for 30 min at room temp.; evapn., washing with EtOH and pentane, drying; elem. anal.;98%
tert.-butylhydroperoxide
75-91-2

tert.-butylhydroperoxide

Pentachlorophenol
87-86-5

Pentachlorophenol

tri(p-tolyl)antimony
5395-43-7

tri(p-tolyl)antimony

μ2-oxobis[(2,3,4,5,6-pentachlorophenoxo)tris(para-tolyl)antimony]

μ2-oxobis[(2,3,4,5,6-pentachlorophenoxo)tris(para-tolyl)antimony]

Conditions
ConditionsYield
In diethyl ether at 20℃; for 24h;98%
morpholine-4-carboxylic acid amide
2158-02-3

morpholine-4-carboxylic acid amide

Pentachlorophenol
87-86-5

Pentachlorophenol

2,3,4,5,6-Pentachloro-phenol; compound with morpholine-4-carboxylic acid amide
87448-70-2

2,3,4,5,6-Pentachloro-phenol; compound with morpholine-4-carboxylic acid amide

Conditions
ConditionsYield
96%
Pentachlorophenol
87-86-5

Pentachlorophenol

N,N-Dimethylthiocarbamoyl chloride
16420-13-6

N,N-Dimethylthiocarbamoyl chloride

O-pentachlorophenyl dimethylthiocarbamate
19387-18-9

O-pentachlorophenyl dimethylthiocarbamate

Conditions
ConditionsYield
With potassium hydroxide In 1,4-dioxane 1.) 30 deg C, 1 h; 2.) 85 deg C, 3 h;96%
Pentachlorophenol
87-86-5

Pentachlorophenol

Pentaerythritol
115-77-5

Pentaerythritol

3,9-bis(2',3',4',5',6'-pentachlorophenoxy)-2,4,8,10-tetraoxa-3,9-diphosphaspiro(5.5)undecane-3,9-dioxide
65284-06-2

3,9-bis(2',3',4',5',6'-pentachlorophenoxy)-2,4,8,10-tetraoxa-3,9-diphosphaspiro(5.5)undecane-3,9-dioxide

Conditions
ConditionsYield
With potassium chloride; trichlorophosphate In toluene95.3%
Pentachlorophenol
87-86-5

Pentachlorophenol

chloranil
118-75-2

chloranil

Conditions
ConditionsYield
With bis-[(trifluoroacetoxy)iodo]benzene In various solvent(s) at 20℃; for 1h; pH=1.4; Oxidation;95%
With nitric acid
With hydrogenchloride; chlorine
Pentachlorophenol
87-86-5

Pentachlorophenol

Ru(CH2C(CH3)CH2)2((C6H11)2PCH2P(C6H5)2)
309965-66-0

Ru(CH2C(CH3)CH2)2((C6H11)2PCH2P(C6H5)2)

Ru(OC6Cl5)2((C6H11)2PCH2P(C6H5)2)
309965-72-8

Ru(OC6Cl5)2((C6H11)2PCH2P(C6H5)2)

Conditions
ConditionsYield
In toluene (Ar); stirring a soln. of ruthenium complex and pentachlorophenol in toluene for 30 min at room temp.; evapn., washing with EtOH and pentane, drying; elem. anal.;95%
Pentachlorophenol
87-86-5

Pentachlorophenol

triphenylantimony
603-36-1

triphenylantimony

di(pentachlorophenolato)triphenylantimony(V)
17363-17-6

di(pentachlorophenolato)triphenylantimony(V)

Conditions
ConditionsYield
With tert.-butylhydroperoxide In diethyl ether at 20℃; for 24h;95%
Pentachlorophenol
87-86-5

Pentachlorophenol

pentaphenylantimony
2170-05-0

pentaphenylantimony

2,3,4,5,6-pentachlorophenoxytetraphenylantimony

2,3,4,5,6-pentachlorophenoxytetraphenylantimony

Conditions
ConditionsYield
In toluene at 24℃; for 0.25h;95%
tris(3-fluorophenyl)antimony

tris(3-fluorophenyl)antimony

Pentachlorophenol
87-86-5

Pentachlorophenol

tris(3-fluorophenyl)antimony-bis(pentachlorophenoxide)

tris(3-fluorophenyl)antimony-bis(pentachlorophenoxide)

Conditions
ConditionsYield
With tert.-butylhydroperoxide In diethyl ether; water at 20℃; for 24h;95%
Pentachlorophenol
87-86-5

Pentachlorophenol

tri(p-tolyl)antimony
5395-43-7

tri(p-tolyl)antimony

bis(pentachlorophenoxy)tri-para-tolylantimony

bis(pentachlorophenoxy)tri-para-tolylantimony

Conditions
ConditionsYield
With tert.-butylhydroperoxide In diethyl ether at 20℃; for 24h;94%
Pentachlorophenol
87-86-5

Pentachlorophenol

benzoic acid
65-85-0

benzoic acid

pentachlorophenyl benzoate
3019-98-5

pentachlorophenyl benzoate

Conditions
ConditionsYield
With 3-(5-nitro-2-oxo-1,2-dihydro-1-pyridyl)-1,2-benzisothiazole 1,1,-dioxide; triethylamine In dichloromethane -10 deg C -> r.t., overnight;93%
With TEA; 3-(5-nitro-2-oxo-1,2-dihydro-1-pyridyl)-1,2-benzisothiazole 1,1,-dioxide In dichloromethane -10 deg C to room temperature;93%
With acetic anhydride
Pentachlorophenol
87-86-5

Pentachlorophenol

Succinic acid mono-[(3aR,4R,6R,6aR)-6-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-2-methoxy-tetrahydro-furo[3,4-d][1,3]dioxol-4-ylmethyl] ester

Succinic acid mono-[(3aR,4R,6R,6aR)-6-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-2-methoxy-tetrahydro-furo[3,4-d][1,3]dioxol-4-ylmethyl] ester

Succinic acid (3aR,4R,6R,6aR)-6-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-2-methoxy-tetrahydro-furo[3,4-d][1,3]dioxol-4-ylmethyl ester pentachlorophenyl ester
89239-05-4

Succinic acid (3aR,4R,6R,6aR)-6-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-2-methoxy-tetrahydro-furo[3,4-d][1,3]dioxol-4-ylmethyl ester pentachlorophenyl ester

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide In N,N-dimethyl-formamide93%
Pentachlorophenol
87-86-5

Pentachlorophenol

penta(p-tolyl)antimony(V)
13328-67-1, 51017-91-5

penta(p-tolyl)antimony(V)

2,3,4,5,6-pentachlorophenoxytetra-p-tolylantimony

2,3,4,5,6-pentachlorophenoxytetra-p-tolylantimony

Conditions
ConditionsYield
In toluene at 24℃; for 0.25h;93%
Pentachlorophenol
87-86-5

Pentachlorophenol

((2,6-diisopropylphenyl)imino)tris((trimethylsilyl)methyl)vanadium

((2,6-diisopropylphenyl)imino)tris((trimethylsilyl)methyl)vanadium

C26H39Cl5NOSi2V

C26H39Cl5NOSi2V

Conditions
ConditionsYield
In hexane at -30 - 20℃; for 14.5h; Sealed tube;93%
Pentachlorophenol
87-86-5

Pentachlorophenol

10-undecenoic acid
112-38-9

10-undecenoic acid

pentachlorophenyl ω-undecenoate

pentachlorophenyl ω-undecenoate

Conditions
ConditionsYield
With dicyclohexyl-carbodiimide In acetonitrile at 25℃; for 1h;92%
Pentachlorophenol
87-86-5

Pentachlorophenol

phosphorus pentachloride
10026-13-8, 874483-75-7

phosphorus pentachloride

phenylmalonic acid
2613-89-0

phenylmalonic acid

dipentachlorophenyl phenylmalonate
59530-33-5

dipentachlorophenyl phenylmalonate

Conditions
ConditionsYield
With pyridine In methanol; dichloromethane92%
Pentachlorophenol
87-86-5

Pentachlorophenol

[Ru(η3-2-MeC3H4)2(κ2-Ph2PCH2CH2PiPr2)]
262359-92-2

[Ru(η3-2-MeC3H4)2(κ2-Ph2PCH2CH2PiPr2)]

[Ru(κ2-O,Cl-pentachlorophenolate)2(κ2-Ph2PCH2CH2PiPr2)]

[Ru(κ2-O,Cl-pentachlorophenolate)2(κ2-Ph2PCH2CH2PiPr2)]

Conditions
ConditionsYield
In toluene (Ar); -30°C; warmed to room temp.; stirred (10 min); solvent evapd. (vac.); washed (pentane); dried; elem. anal.;92%

87-86-5Relevant articles and documents

Nano Fe3O4@ZrO2/SO42?: A highly efficient catalyst for the protection and deprotection of hydroxyl groups using HMDS under solvent-free condition

Ghafuri, Hossein,Paravand, Fatemeh,Rashidizadeh, Afsaneh

supporting information, p. 129 - 135 (2016/12/24)

In this work, we introduce a new procedure for the protection and deprotection process of various types of alcohols and phenols by HMDS in the presence of nano magnetic sulfated zirconia (Fe3O4@ZrO2/SO42?) as a solid acid catalyst under very mild and solvent-free condition. This method has interesting advantages like short reaction times and a simple workup process. With regard to some outstanding benefits of this new heterogeneous catalyst such as excellent yield, reusability of the catalyst and easy thermal stability, high acidity, strong and excellent magnetic properties, this method can be very interesting in aspect of green chemistry Principles.

Method for reducing microcontaminants during synthesis of pentachlorophenol

-

Page/Page column 5, (2008/06/13)

A method for reducing contaminants during synthesis of pentachlorophenol includes providing a phenol-based starting material and a catalyst, which form a reaction mixture. A chlorine flow is introduced so that it is in contact with the reaction mixture, and the starting material and chlorine are reacted via a temperature-programmed reaction. The chlorine flow is terminated at a predetermined temperature prior to an end of the temperature-programmed reaction and/or at a point where the yield of pentachlorophenol is less than about 95%.

Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride and other polymers in the presence of HCl

Ohta, Minoru,Oshima, Shozo,Osawa, Naoki,Iwasa, Toshio,Nakamura, Tadashi

, p. 1521 - 1531 (2007/10/03)

PVDC and three non-chlorinated polymers (PP, PET, and PA) were incinerated at 700-850°C in a laboratory-scale quartz tubular furnace in the presence of HCl (ca. 500 ppm?0.8 mg/l), and the gas-phase formation of PCDD/Fs, their putative precursors and their homologue profiles were investigated. The addition of HCl had little or no apparent effect on the level of PCDD/Fs formation during PVDC combustion, and their homologue profiles were quite different from those of the three non-chlorinated polymers. With PVDC, O 8CDD and particularly O8CDF were by far most prevalent, apparently as a result of the selective formation of the precursors. With each of the three non-chlorinated polymers, combustion at 800°C or higher in the presence of HCl resulted in PCDD/Fs formation at levels equaling or exceeding those observed with PVDC. In trials made with one of them (PP) under the same conditions but using a large polymer sample (100 mg vs 20 mg in all other trials), the level of PCDD/Fs formation was far higher than with the smaller polymer samples, and thus demonstrated the importance of appropriate combustion conditions for polymer incineration.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 87-86-5