2398-37-0Relevant articles and documents
One-step preparation of some 3-substituted anisoles
Zilberman, Joseph
, p. 303 - 305 (2003)
A one-step preparation of 3-bromoanisole, 3-chloroanisole, and 3-trifluoromethylanisole from the corresponding 3-substituted nitrobenzenes is carried out by nucleophilic aromatic substitution of the nitro group with sodium or potassium methoxide, employing an effective amount of a phase-transfer catalyst (PTC), in a medium of a nonpolar aprotic solvent, under aerobic conditions, at a temperature of 50-65°C. The alkali methoxide used can be a pre-prepared solid, or it can be prepared in situ from the alkali hydroxide and methanol. The methoxydenitration proved to be very sensitive to the type of PTC. The effect of the solvent on the reaction is discussed. The targeted anisoles are obtained in yields of more than 80% and purities of greater than 99%.
A Unified Approach to Decarboxylative Halogenation of (Hetero)aryl Carboxylic Acids
Blakemore, David C.,Castellano, Felix N.,Chen, Tiffany Q.,Danilov, Evgeny O.,Dechert-Schmitt, Anne-Marie,Dow, Nathan W.,Fayad, Remi,Hauke, Cory E.,Knauber, Thomas,Macmillan, David W. C.,Pedersen, P. Scott,Rosko, Michael C.
supporting information, (2022/05/20)
Aryl halides are a fundamental motif in synthetic chemistry, playing a critical role in metal-mediated cross-coupling reactions and serving as important scaffolds in drug discovery. Although thermal decarboxylative functionalization of aryl carboxylic acids has been extensively explored, the scope of existing halodecarboxylation methods remains limited, and there currently exists no unified strategy that provides access to any type of aryl halide from an aryl carboxylic acid precursor. Herein, we report a general catalytic method for direct decarboxylative halogenation of (hetero)aryl carboxylic acids via ligand-to-metal charge transfer. This strategy accommodates an exceptionally broad scope of substrates. We leverage an aryl radical intermediate toward divergent functionalization pathways: (1) atom transfer to access bromo- or iodo(hetero)arenes or (2) radical capture by copper and subsequent reductive elimination to generate chloro- or fluoro(hetero)arenes. The proposed ligand-to-metal charge transfer mechanism is supported through an array of spectroscopic studies.
Nickel-Catalyzed Photodehalogenation of Aryl Bromides
Higginson, Bradley,Sanjosé-Orduna, Jesus,Gu, Yiting,Martin, Ruben
supporting information, p. 1633 - 1636 (2021/04/23)
Herein, we describe a Ni-catalyzed photodehalogenation of aryl bromides under visible-light irradiation that utilizes tetrahydrofuran as hydrogen source. The protocol obviates the need for exogeneous amine reductants or photocatalysts and is characterized by its simplicity and broad scope, including challenging substrate combinations.
Total synthesis of carbazole alkaloids
Bhatthula, Bharath kumar goud,Kanchani, Janardhan reddy,Arava, Veera reddy,Subha
supporting information, p. 874 - 887 (2019/01/11)
A Suzuki-Miyaura cross coupling, followed by triphenylphosphine mediated Cadogan reductive cyclization sequence provided efficient access to a series of carbazole alkaloids. In the present work, this approach was applied to the total synthesis of mukonine, clauszoline K, koenoline, murrayanine, murrayafoline A, mukoeic acid, glycoborine, glycozolicine, mukolidine, mukoline, glycozoline, 3-methoxy-9H-carbazole-1-carboxylic acid methyl ester, (3-methoxy-9H-carbazol-1-yl)-methanol, 3-methoxy-9H-carbazole-1-carbaldehyde, 3-methoxy-9H-carbazole-1-carboxylic acid, 2-methyl-9H-carbazole and nonsteroidal anti-inflammatory drug (NSAID) carprofen and its derivatives.
One-Pot, Metal-Free Conversion of Anilines to Aryl Bromides and Iodides
Leas, Derek A.,Dong, Yuxiang,Vennerstrom, Jonathan L.,Stack, Douglas E.
supporting information, p. 2518 - 2521 (2017/05/24)
A metal-free synthesis of aryl bromides and iodides from anilines via halogen abstraction from bromotrichloromethane and diiodomethane is described. This one-pot reaction affords aryl halides from the corresponding anilines in moderate to excellent yields without isolation of diazonium salts. The transformation has short reaction times, a simple workup, and insensitivity to moisture and air and avoids excess halogenation. DFT calculations support a SRN1 mechanism. This method represents a convenient alternative to the classic Sandmeyer reaction.
Base Mediated Synthesis of Alkyl-aryl Ethers from the Reaction of Aliphatic Alcohols and Unsymmetric Diaryliodonium Salts
Sundalam, Sunil K.,Stuart, David R.
, p. 6456 - 6466 (2015/06/30)
The base mediated coupling of aliphatic alcohol pronucleophiles with unsymmetric diaryliodonium salt electrophiles is described. This metal-free reaction is operationally simple, proceeds at mild temperature, and displays broad substrate scope to generate industrially important alkyl-aryl ethers in moderate to excellent yield. The synthetic utility of these reactions is demonstrated, and aspects of sustainability are highlighted by the use of unsymmetric aryl(mesityl)iodonium arylating reagents.
Halogen exchange via a halogenation of diaryliodonium salts with cuprous halide
Li, Jian,Liu, Li,Ding, Dong,Sun, Jiang-Tao
, p. 541 - 548 (2014/01/06)
An efficient halogenation reaction has been developed with diaryliodonium salts and cuprous halides. Various diaryliodonium salts 1 could perform the reaction with readily available CuBr or CuCl in CH3CN at 80°C, assembling bromoarenes or chloroarenes in up to 92% yields. This provides us a method for the transformation from iodoarenes to other haloarenes.
Antimony(V) chloride as an efficient reagent for deprotection of methyl ethers
Saadati, Fariba,Meftah-Booshehri, Hamid
, p. 1702 - 1706 (2013/09/02)
This paper proposes a new and efficient method for the deprotection of methyl ethers using antimony pentachloride at ambient temperature. The procedure described here is a facile and practical method for the removal of the methyl group from aryl and benzyl methyl ethers. High selectivity was observed for the removal of the methyl group from dimethoxyarenes. The notable advantages of this protocol are mild reaction conditions, high yields, and the facility of workup procedure. The mechanism of the ether cleavage is proposed to explain this new reaction. Georg Thieme Verlag Stuttgart New York.
A continuous methylation of phenols and N, H -heteroaromatic compounds with dimethyl carbonate
Tilstam, Ulf
, p. 1974 - 1978 (2013/02/25)
The methylation of phenolic substrates has been reevaluated using sulfolane as solvent instead of DMF. The change of solvent gave in all cases cleaner production of the anisole products in very good yields. The reaction requires 0.1 equiv of DBU, 2-3 equiv of DMC, and 2-5 vols of sulfolane depending on the substrate. At 220 C the reaction time is 10 min. Sulfolane is completely stable under the reaction conditions, excluding unwanted impurities from the solvent. The reaction could also be extended to NH-indole and NH-imidazole derivatives utilizing 0.1 equiv of DBU and 2-3 equiv of DMC in 2 vols of sulfolane. All NH-heteroaromatic compounds gave clean N-methylation.
A continuous base-catalyzed methylation of phenols with dimethyl carbonate
Tilstam, Ulf
experimental part, p. 1150 - 1153 (2012/08/27)
We have found that the use of a conventional, heated, standard 316 stainless steel or steel-braided PTFE tube reactor is a good and easily scalable alternative to the use of continuous microwave-heated reactors. The heat-up is almost as fast as with microwave heating, and the reactors can easily be scaled towards large-scale production. The transfer of the reported microwave procedure to the continuous flow method went very smoothly, and we found that we could further optimize the reaction to a catalytic procedure where only 10 mol % of DBU is needed with only 3 equiv of DMC. The reaction can be run neat in cases where the starting material is soluble in DMC as phenol is, or with a small amount of DMF (2-3 vol). The reaction is efficient for different types of phenols, giving a clean reaction in high yields.
