74-11-3Relevant articles and documents
A novel immobilised cobalt(III) oxidation catalyst
Das, Birinchi K.,Clark, James H.
, p. 605 - 606 (2000)
A complex form of cobalt(III) has been successfully immobilised on a chemically modified silica and proven to be an active catalyst for the selective oxidation of alkylaromatics using air as the source of oxygen and in the absence of solvent.
EVIDENCE D'UN MECANISME DE CATALYSE PAR TRANSFERT MONOELECTRONIQUE (ETC) POUR LA REACTION DE CANNIZZARO, EN PHASE HETEROGENE, EN CONDITIONS SONOCHIMIQUES
Fuentes, A.,Marinas, J.M.,Sinisterra, J.V.
, p. 2947 - 2950 (1987)
Additional evidence about an Electron Transfer Catalysis Mechanism (ETC) in the Cannizzaro reaction, catalyzed by solid bases under sonochemical conditions is shown.The reducing sites of basic solids and the ultrasound act in the first step of the ETC mechanism.
Stepwise benzylic oxygenation via uranyl-photocatalysis
Hu, Deqing,Jiang, Xuefeng
supporting information, p. 124 - 129 (2022/01/19)
Stepwise oxygenation at the benzylic position (1°, 2°, 3°) of aromatic molecules was comprehensively established under ambient conditions via uranyl photocatalysis to produce carboxylic acids, ketones, and alcohols, respectively. The accuracy of the stepwise oxygenation was ensured by the tunability of catalytic activity in uranyl photocatalysis, which was adjusted by solvents and additives demonstrated through Stern–Volmer analysis. Hydrogen atom transfer between the benzylic position and the uranyl catalyst facilitated oxygenation, further confirmed by kinetic studies. Considerably improved efficiency of flow operation demonstrated the potential for industrial synthetic application.
Gram-scale synthesis of carboxylic acids via catalytic acceptorless dehydrogenative coupling of alcohols and hydroxides at an ultralow Ru loading
Chen, Cheng,Cheng, Hua,Verpoort, Francis,Wang, Zhi-Qin,Wu, Zhe,Yuan, Ye,Zheng, Zhong-Hui
, (2021/12/13)
Acceptorless dehydrogenative coupling (ADC) of alcohols and water/hydroxides is an emergent and graceful approach to produce carboxylic acids. Therefore, it is of high demand to develop active and practical catalysts/catalytic systems for this attractive transformation. Herein, we designed and fabricated a series of cyclometallated N-heterocyclic carbene-Ru (NHC-Ru) complexes via ligand tuning of [Ru-1], the superior complex in our previous work. Gratifyingly, gram-scale synthesis of carboxylic acids was efficiently enabled at an ultralow Ru loading (62.5 ppm) in open air. Moreover, effects of distinct ancillary NHC ligands and other parameters on this catalytic process were thoroughly studied, while further systematic studies were carried out to provide rationales for the activity trend of [Ru-1]-[Ru-7]. Finally, determination of quantitative green metrics illustrated that the present work exhibited superiority over representative literature reports. Hopefully, this study could provide valuable input for researchers who are engaging in metal-catalyzed ADC reactions.
Transformation of Thioacids into Carboxylic Acids via a Visible-Light-Promoted Atomic Substitution Process
Fu, Qiang,Liang, Fu-Shun,Lou, Da-Wei,Pan, Gao-Feng,Wang, Rui,Wu, Min,Xie, Kai-Jun
supporting information, p. 2020 - 2024 (2022/03/31)
A visible-light-promoted atomic substitution reaction for transforming thiocacids into carboxylic acids with dimethyl sulfoxide (DMSO) as the oxygen source has been developed, affording various alkyl and aryl carboxylic acids in over 90% yields. The atomic substitution process proceeds smoothly through the photochemical reactivity of the formed hydrogen-bonding adduct between thioacids and DMSO. A DMSO-involved proton-coupled electron transfer (PCET) and the simultaneous generation of thiyl and hydroxyl radicals are proposed to be key steps for realizing the transformation.
PREPARATION OF AROMATIC CARBONYL COMPOUNDS BY CATALYTIC OXIDATION WITH MOLECULAR OXYGEN
-
Page/Page column 12, (2021/08/20)
The present invention relates to a process for the preparation of aromatic carbonyl compounds of formula I, which can be obtained through reaction of compounds of formula II with molecular oxygen in the presence of a solvent and a catalyst, which is composed of a cobalt(II) salt and N,N',N''-trihydroxyisocyanuric acid (THICA).
An efficient chromium(iii)-catalyzed aerobic oxidation of methylarenes in water for the green preparation of corresponding acids
Jiang, Feng,Liu, Shanshan,Wei, Yongge,Yan, Likai,Yu, Han,Zhao, Wenshu
supporting information, p. 12413 - 12418 (2021/09/28)
A highly efficient method to oxidize methylarenes to their corresponding acids with a reusable Cr catalyst was developed. The reaction can be carried out in water with 1 atm oxygen and K2S2O8as cooxidants, proceeds under green and mild conditions, and is suitable for the oxidation of both electron-deficient and electron-rich methylarenes, including heteroaryl methylarenes, even at the gram level. The excellent result, together with its simplicity of operation and the ability to continuously reuse the catalyst, makes this new methodology environmentally benign and cost-effective. The generality of this methodology gives it the potential for use on an industrial scale. Differing from the accepted oxidation mechanism of toluene, GC-MS studies and DFT calculations have revealed that the key benzyl alcohol intermediate is formed under the synergetic effect of the chromium and molybdenum in the Cr catalyst, which can be further oxidized to afford benzaldehyde and finally benzoic acid.
Photo-induced deep aerobic oxidation of alkyl aromatics
Wang, Chang-Cheng,Zhang, Guo-Xiang,Zuo, Zhi-Wei,Zeng, Rong,Zhai, Dan-Dan,Liu, Feng,Shi, Zhang-Jie
, p. 1487 - 1492 (2021/07/10)
Oxidation is a major chemical process to produce oxygenated chemicals in both nature and the chemical industry. Presently, the industrial manufacture of benzoic acids and benzene polycarboxylic acids (BPCAs) is mainly based on the deep oxidation of polyalkyl benzene, which is somewhat suffering from environmental and economical disadvantage due to the formation of ozone-depleting MeBr and corrosion hazards of production equipment. In this report, photo-induced deep aerobic oxidation of (poly)alkyl benzene to benzene (poly)carboxylic acids was developed. CeCl3 was proved to be an efficient HAT (hydrogen atom transfer) catalyst in the presence of alcohol as both hydrogen and electron shuttle. Dioxygen (O2) was found as a sole terminal oxidant. In most cases, pure products were easily isolated by simple filtration, implying large-scale implementation advantages. The reaction provides an ideal protocol to produce valuable fine chemicals from naturally abundant petroleum feedstocks. [Figure not available: see fulltext.].
Ferric ion concentration-controlled aerobic photo-oxidation of benzylic C–H bond with high selectivity and conversion
Bu, Hongzhong,Gu, Jiefan,Li, Yufeng,Ma, Hongfei,Wan, Yuting,Wu, Zheng-Guang,Zhang, Weijian,Zhou, Ying'ao,Zhu, Hongjun
, (2021/07/16)
A Fe(III)-promoted highly selective photo-oxidation of benzylic C–H bond delivering relative carbonyl products is reported. By altering the concentration of ferric salt, methylarenes can be selectively oxidized under UV irradiation to furnish aromatic aldehydes or acids, respectively. By this protocol, the oxidation of ethylarenes provides the corresponding acetophenones. The reaction is inferred to involve divergent pathways in different concentrations of catalyst for the alternative selectivity between aldehydes and aicds. The reusable catalyst, high conversion and selectivity make this oxidation a green and economic protocol for the synthesis of aromatic carbonyl compounds.
Photoinduced FeCl3-Catalyzed Alkyl Aromatics Oxidation toward Degradation of Polystyrene at Room Temperature?
Zhang, Guoxiang,Zhang, Zongnan,Zeng, Rong
supporting information, p. 3225 - 3230 (2021/09/28)
While polystyrene is widely used in daily life as a synthetic plastic, the subsequently selective degradation is still very challenging and highly required. Herein, we disclose a highly practical and selective reaction for the catalytically efficient oxidation of alkyl aromatics (including 1°, 2°, and 3° alkyl aromatics) to carboxylic acids. While dioxygen was used as the sole terminal oxidant, this protocol was catalyzed by the inexpensive and readily available ferric compound (FeCl3) with irradiation of visible light (blue LEDs) under only 1 atmosphere of O2 at room temperature. This system could further facilitate the selective degradation of polystyrene to benzoic acid, providing an important and practical tool to generate high-value chemical from abundant polystyrene wastes.
