- Determination of prilocaine HCl in pharmaceutical preparations by GC-MS method
-
The novel analytical method using gas chromatography with mass spectrometry detection (GC-MS) method for determination of prilocaine HCl in pharmaceutical preparations were developed and validated. The using lidocaine HCl as the internal standard (IS) was
- Atila, Alptug,Kadioglu, Yucel
-
-
Read Online
- Palladium Immobilized on a Polyimide Covalent Organic Framework: An Efficient and Recyclable Heterogeneous Catalyst for the Suzuki–Miyaura Coupling Reaction and Nitroarene Reduction in Water
-
An efficient and recyclable Pd nano-catalyst was developed via immobilization of Pd nanoparticles on polyimide linked covalent organic frameworks (PCOFs) that was facilely prepared through condensation of melamine and 3,3′,4,4′-biphenyltetracarboxylic dianhydride. The Pd nanoparticles (Pd NPs) catalyst was thoroughly characterized by FT-IR, XRD, SEM, TEM. Furthermore, the catalytic activity of Pd NPs catalyst was evaluated by Suzuki–Miyaura coupling reaction and nitroarene reduction in water, respectively. The excellent yields of corresponding products revealing revealed that the Pd NPs catalyst could be applied as an efficient and reusable heterogeneous catalyst for above two reactions. Graphical Abstract: [Figure not available: see fulltext.]
- Dong, Zhenhua,Pan, Hongguo,Gao, Pengwei,Xiao, Yongmei,Fan, Lulu,Chen, Jing,Wang, Wentao
-
p. 299 - 306
(2021/05/10)
-
- Industrial Cunninghamia lanceolata carbon supported FeO(OH) nanoparticles-catalyzed hydrogenation of nitroarenes
-
The development of green and efficient methods for hydrogenation of nitroarenes is still highly demanding in organic synthesis. Herein, we report an industrial Cunninghamia lanceolata carbon supported FeO(OH) nanoparticles process for the synthesis of aryl amines with good yields via hydrogenation of nitroarenes. Nine key anti-cancer drug intermediates were successfully achieved with protocol. And Osimertinib intermediate 4m can be smoothly synthesized at a 2.67 kg-scale with >99.5% HPLC purity. This protocol features cheap carbon source, highly catalytic activity, simple operation, kilogram-scalable and recyclable catalysts (eight times without observable losing activity).
- Fu, Lihua,Li, Dingzhong,Lu, Hao,Qiu, Renhua,Sun, Tulai,Xing, Chen,Yang, Tianbao
-
-
- Rh-PVP Catalyzed Reductive Amination of Phenols by Ammonia or Amines to Cyclohexylamines under Solvent-free Conditions
-
Colloidal metal nanoparticles were examined for reductive amination of phenol by ammonia under mild reaction conditions. The results showed that Rh-PVP was the most active catalyst for reductive amination reaction. Linear, cyclic, and amino alcohols were used as nucleophiles and converted to primary/secondary/tertiary amines. Using this strategy, the synthesis of an industrially important chemical, N-cyclohexyl- 2-pyrrolidone was explored.
- Chaudhari, Chandan,Nagaoka, Katsutoshi,Nishida, Yoshihide,Rumi, Saeki,Sato, Katsutoshi,Shiraishi, Masaya
-
supporting information
p. 81 - 84
(2022/01/12)
-
- Magnetically‐recoverable Schiff base complex of Pd(II) immobilized on Fe3O4@SiO2 nanoparticles: an efficient catalyst for the reduction of aromatic nitro compounds to aniline derivatives
-
Fe3O4@SiO2/Schiff base/Pd(II) is reported as a magnetically recoverable heterogeneous catalyst for the chemoselective reduction of aromatic nitro compounds to the corresponding amines through catalytic transfer hydrogenation (CTH). In this regard, a small amount of the nanocatalyst (0.52?mol% Pd) and hydrazine hydrate, showing safe characteristics and perfect ability as the hydrogen donor, were added to the nitro substrates. The experiments described the successful reduction of aromatic nitro compounds with good to excellent yields and short reaction times. The catalyst, due to its magnetic property, could be simply separated from the reaction mixture by a permanent magnet and reused in seven consecutive reactions without considerable loss in its activity. Moreover, the leaching of Pd was only 3.6% after the seventh run. Thus, the most striking feature of this method is to use a small amount of the magnetic nanocatalyst along with a cheap and safe hydrogen source to produce the important amine substances selectively, which makes the method economical, cheap, environmentally friendly, and simple. Graphic abstract: [Figure not available: see fulltext.]
- Azadi, Sedigheh,Esmaeilpour, Mohsen,Sardarian, Ali Reza
-
p. 809 - 821
(2021/07/20)
-
- Synthetic method of chlorantraniliprole pesticide intermediate 2 - amino -5 - chlorine - N and 3 -dimethylbenzamide
-
The invention relates to a synthetic method of a chlorantraniliprole pesticide intermediate 2 - amino -5 - chlorine - N and 3 -dimethylbenzamide. Chloro, formylation gave 2 - amino -5 - chloro - N, 3 - dimethyl. The method has the advantages of simple reaction, low cost and high yield, and is a method suitable for industrial production.
- -
-
Paragraph 0021-0023
(2021/10/05)
-
- NaI/PPh3-Mediated Photochemical Reduction and Amination of Nitroarenes
-
A mild transition-metal- and photosensitizer-free photoredox system based on the combination of NaI and PPh3 was found to enable highly selective reduction of nitroarenes. This protocol tolerates a broad range of reducible functional groups such as halogen (Cl, Br, and even I), aldehyde, ketone, carboxyl, and cyano. Moreover, the photoredox catalysis with NaI and stoichiometric PPh3 provides also an alternative entry to Cadogan-type reductive amination when o-nitrobiarenes were used.
- Qu, Zhonghua,Chen, Xing,Zhong, Shuai,Deng, Guo-Jun,Huang, Huawen
-
supporting information
p. 5349 - 5353
(2021/07/21)
-
- A Concise Route to Cyclic Amines from Nitroarenes and Ketoacids under Iron-Catalyzed Hydrosilylation Conditions
-
Starting from nitroarenes, under hydrosilylation conditions, using a well-defined N-heterocyclic carbene iron(0) catalyst, (IMes)Fe(CO)4, the corresponding aniline derivatives were produced in 61–92% isolated yields. More impressively, a selective synthesis of cyclic amines such as pyrrolidines, piperidines and azepanes were conducted from levulinic acid, 1,5- and 1,6-keto acids, respectively. The sequential procedure proceeded under both visible light irradiation and thermal conditions with 20 examples in isolated yields up to 69%. (Figure presented.).
- Ammaiyappan, Yuvaraj,Darcel, Christophe,Tongdee, Satawat,Wu, Jiajun
-
p. 3859 - 3865
(2021/07/12)
-
- Multi-functional aromatic amine compound as well as preparation method and application thereof
-
The invention belongs to the technical field of synthesis of aromatic amine compounds, and particularly relates to a multi-functional aromatic amine compound as well as a preparation method and application thereof. The invention provides a multi-functional aromatic amine compound and also provides a preparation method of the multi-functional aromatic amine compound. The amination reaction of aromatic carboxylic acid is catalyzed by DMAP at a relatively low temperature under the condition of no transition metal, and the method can be used for synthesizing a series of multi-functional aromatic amine compounds. The preparation method has not been reported in literature at present. The invention also provides a derivative product of arylamine and a preparation method thereof, and an application of the multi-functional aromatic amine compound in later modification of active molecules. The compound can be used for construction of optical active urea compounds and some important active molecules, and has a development prospect in synthesis of active drugs and natural products.
- -
-
-
- Ligand compound for copper catalyzed aryl halide coupling reaction, catalytic system and coupling reaction
-
The invention provides a ligand compound capable of being used for copper catalyzed aryl halide coupling reaction, the ligand compound is a three-class compound containing a 2-(substituted or non-substituted) aminopyridine nitrogen-oxygen group, and the invention also provides a catalytic system for the aryl halide coupling reaction. Thecatalytic system comprises a copper catalyst, a compound containing a 2-(substituted or non-substituted) aminopyridine nitrogen-oxygen group adopted as a ligand, alkali and a solvent, and meanwhile, the invention also provides a system for the aryl halide coupling reaction adopting the catalyst system. The compound containing the 2-(substituted or non-substituted) aminopyridine nitrogen oxygen group can be used as the ligand for the copper catalyzed aryl chloride coupling reaction, and the ligand is stable under a strong alkaline condition and can well maintain catalytic activity when being used for the copper-catalyzed aryl chloride coupling reaction. In addition, the copper catalyst adopting the compound as the ligand can particularly effectively promote coupling of copper catalyzed aryl chloride and various nucleophilic reagents which are difficult to generate under conventional conditions, C-N, C-O and C-S bonds are generated, and numerous useful small molecule compounds are synthesized. Therefore, the aryl halide coupling reaction has a very good large-scale application prospect by adopting the copper catalysis system of the ligand.
- -
-
Paragraph 0111-0119
(2021/05/29)
-
- Synthesis of Substituted Anilines from Cyclohexanones Using Pd/C-Ethylene System and Its Application to Indole Synthesis
-
The synthesis of anilines and indoles from cyclohexanones using a Pd/C-ethylene system is reported. A simple combination of NH4OAc and K2CO3 under nonaerobic conditions was found to be the most suitable to perform this reaction. Hydrogen transfer between cyclohexanone and ethylene generates the desired products. The reaction tolerates a variety of substitutions on the starting cyclohexanones.
- Maeda, Katsumi,Matsubara, Ryosuke,Hayashi, Masahiko
-
supporting information
p. 1530 - 1534
(2021/03/08)
-
- Selective primary aniline synthesis through supported Pd-catalyzed acceptorless dehydrogenative aromatization by utilizing hydrazine
-
By utilizing hydrazine (N2H4) as the nitrogen source in the presence of a hydroxyapatite-supported Pd nanoparticle catalyst (Pd/HAP), various primary anilines can be selectively synthesized from cyclohexanonesviaacceptorless dehydrogenative aromatization. The strong nucleophilicity of N2H4and the stability of the hydrazone intermediates can effectively suppress the formation of the undesired secondary aniline byproducts.
- Lin, Wei-Chen,Yatabe, Takafumi,Yamaguchi, Kazuya
-
supporting information
p. 6530 - 6533
(2021/07/07)
-
- Minimization of Back-Electron Transfer Enables the Elusive sp3 C?H Functionalization of Secondary Anilines
-
Anilines are some of the most used class of substrates for application in photoinduced electron transfer. N,N-Dialkyl-derivatives enable radical generation α to the N-atom by oxidation followed by deprotonation. This approach is however elusive to monosubstituted anilines owing to fast back-electron transfer (BET). Here we demonstrate that BET can be minimised by using photoredox catalysis in the presence of an exogenous alkylamine. This approach synergistically aids aniline SET oxidation and then accelerates the following deprotonation. In this way, the generation of α-anilinoalkyl radicals is now possible and these species can be used in a general sense to achieve divergent sp3 C?H functionalization.
- Zhao, Huaibo,Leonori, Daniele
-
supporting information
p. 7669 - 7674
(2021/03/08)
-
- Ultrathin Amorphous/Crystalline Heterophase Rh and Rh Alloy Nanosheets as Tandem Catalysts for Direct Indole Synthesis
-
Heterogeneous noble-metal-based catalysis plays an essential role in the production of fine chemicals. Rh-based catalysts are one of the most active candidates for indole synthesis. However, it is still highly desired to develop heterogeneous Rh-based catalysts with high activity and selectivity. In this work, a general, facile wet-chemical method is reported to synthesize ultrathin amorphous/crystalline heterophase Rh and Rh-based bimetallic alloy nanosheets (NSs), including RhCu, RhZn, and RhRu. Impressively, the amorphous/crystalline heterophase Rh NSs exhibit enhanced catalytic activity toward the direct synthesis of indole compared to the crystalline counterpart. Importantly, the obtained amorphous/crystalline heterophase RhCu alloy NSs can further enhance the selectivity to indole of >99.9% and the conversion is 100%. This work demonstrates the importance of phase engineering and metal alloying in the rational design and synthesis of tandem heterogeneous catalysts toward fine chemical synthesis.
- Ge, Jingjie,Yin, Peiqun,Chen, Ye,Cheng, Hongfei,Liu, Jiawei,Chen, Bo,Tan, Chaoliang,Yin, Peng-Fei,Zheng, Hong-Xing,Li, Qiang-Qiang,Chen, Shuangming,Xu, Wenjie,Wang, Xiaoqian,Wu, Geng,Sun, Rongbo,Shan, Xiang-Huan,Hong, Xun,Zhang, Hua
-
-
- Method for synthesizing heteroatom- substituted aromatic compound from styrene compound
-
The invention discloses a method for synthesizing a heteroatom-substituted aromatic compound from a styrene compound, which comprises the following steps of: mixing a styrene compound with a general formula (I) and a heteroatom-containing compound with a general formula (II), and reacting in the presence of an acid additive and an organic solvent to obtain a heteroatom-substituted compound with ageneral formula (III). According to the synthesis method disclosed by the invention, a large amount of styrene compounds are used as raw materials and react to generate aromatic amine or phenol compounds under the action of no metal catalysis; and compared with the traditional aromatic amine and phenol synthesis method, the method has the advantages of high yield, simple conditions, low waste discharge amount, no metal participation, simple reaction equipment, easiness in industrial production and the like.
- -
-
Paragraph 0185-0188
(2021/02/06)
-
- Photocatalytic one-pot multidirectional N-alkylation over Pt/D-TiO2/Ti3C2: Ti3C2-based short-range directional charge transmission
-
Visible-light-induced one-pot, multistep, and chemoselectivity adjustable reactions highlight the economical, sustainable, and green process. Herein, we report Pt nanoparticles dispersed on S and N co-doped titanium dioxide/titanium carbide (MXene) (3%Pt/
- Jiang, Heyan,Sheng, Meilin,Li, Yue,Kong, Shuzhen,Bian, Fengxia
-
-
- Synthesis of Stannylated Aryl Imines and Amines via Aryne Insertion Reactions into Sn?N Bonds
-
The reaction of in situ generated arynes with stannylated imines to provide ortho-stannyl-aniline derivatives is reported. The readily prepared trimethylstannyl benzophenone imine is introduced as an efficient reagent to realize the aryne σ-insertion reaction. The imine functionality is an established N-protecting group and insertions proceed with good yields and good to excellent regioselectivities. The product anilines are valuable starting materials for follow-up chemistry thanks to the rich chemistry offered by the trimethylstannyl moiety.
- Kran, Eva,Mück-Lichtenfeld, Christian,Daniliuc, Constantin G.,Studer, Armido
-
p. 9281 - 9285
(2021/05/31)
-
- Synthesis, characterization, and catalytic activity of half-sandwich ruthenium complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene, E = S, Se) ligands
-
Three half-sandwichruthenium(II) complexes with pyridine/phenylene bridged NHC = E (NHC = N-heterocyclic carbene, E = S, Se) ligands [Ru(p-cymene)L](PF6)1–2 (1a–1c, L = ligand) were synthesized and characterized. All ruthenium complexes were fully characterized by 1H and 13C NMR spectra, mass spectrometry, and single-crystalX-ray diffraction methods. Moreover, the half-sandwich ruthenium complexes with NHC = E ligands showed highly catalytic activities towards to the tandem dehydrogenation of ammonia borane (AB) and hydrogenation of R–NO2 to R–NH2 at 353 K in water.
- Jia, Wei-Guo,Du, Teng-Teng,Gao, Li-Li,Du, Jun
-
-
- Tin(ii) chloride dihydrate/choline chloride deep eutectic solvent: Redox properties in the fast synthesis of: N -arylacetamides and indolo(pyrrolo)[1,2- a] quinoxalines
-
In this contribution a physicochemical, IR and Raman characterization for the tin(ii) chloride dihydrate/choline chloride eutectic mixture is reported. The redox properties of this solvent were also studied by cyclic voltammetry finding that it can be successfully used as an electrochemical solvent for electrosynthesis and electroanalytical processes and does not require negative potentials as verified by the reduction of nitrobenzene. The potential use of this eutectic mixture as a redox solvent was further explored in obtaining aromatic amines and N-arylacetamides starting from a wide variety of nitroaromatic compounds. In addition, a fast synthetic strategy for the construction of a series of indolo(pyrrolo)[1,2-a]quinoxalines was developed by reacting 1-(2-nitrophenyl)-1H-indole(pyrrole) with aldehydes. This simple protocol offers a straightforward method for the construction of the target quinoxalines in short reaction times and high yields where the key step involves a tandem one-pot reductive cyclization-oxidation.
- Bejarano, Oscar Rodríguez,Ochoa-Puentes, Cristian,Pe?a-Solórzano, Diana,Trujillo, Sergio Alfonso
-
p. 40552 - 40561
(2020/11/18)
-
- Simple reversible fixation of a magnetic catalyst in a continuous flow system: Ultrafast reduction of nitroarenes and subsequent reductive amination using ammonia borane
-
Continuous reductive amination of aldehydes with nitroarenes over a Pd-Pt-Fe3O4 catalyst was performed. We used NH3BH3 as not only a hydrogen source for nitro reduction, but also a reductant for imine reduction. Secondary aromatic amines were obtained in the continuous flow reaction in good to excellent yields.
- Byun, Sangmoon,Cho, Ahra,Kang, Dong Yun,Kim, B. Moon,Kim, Ha Joon,Kim, Hong Won,Kim, Seong Min,Lei, Cao,Park, Jin Kyoon
-
p. 944 - 949
(2020/03/11)
-
- Palladium Nanocatalysts Encapsulated on Porous Silica @ Magnetic Carbon-Coated Cobalt Nanoparticles for Sustainable Hydrogenation of Nitroarenes, Alkenes and Alkynes.
-
Palladium nanoparticles were impregnated on porous silica shell carbon-coated cobalt nanoparticles, resulting in a magnetically retrievable material that was evaluated in the catalytic hydrogenation of nitroarenes, alkenes and alkynes. The prepared material was characterized by HR-XRD, HR-TEM, elemental mapping EDX, ICP-OES and XPS analyses, revealing highly dispersed palladium nanoparticles within the porous platform that could account for the high activity observed. Mild reaction conditions, easy retrievability of the catalyst with the aid of an external magnet, recycling in four runs with a total leaching of 19 ppm (1.2 % of the initially employed Pd amount), and high stability makes this material attractive for sustainable and environmentally benign applications.
- Purohit, Gunjan,Rawat, Diwan S.,Reiser, Oliver
-
p. 569 - 575
(2019/11/19)
-
- Palladium supported on metal–organic framework as a catalyst for the hydrogenation of nitroarenes under mild conditions
-
Sustainable development demands an environmentally friendly and efficient method for the hydrogenation of organic molecules, including the hydrogenation of functionalized nitroarenes. In this study, a highly active and selective metal–organic framework-supported palladium catalyst was prepared for the catalytic hydrogenation of nitroarenes. High selectivity (>99%) and excellent yield (98%) of aniline were realized after 2 hours in ethanol under hydrogen (1 atm) at room temperature. The reductions were successfully carried out in the presence of a wide range of other reducible functional groups. More importantly, the catalyst was very stable without the loss of its catalytic activity after five cycles.
- Bao, Lingxiang,Fei, Teng,Li, Jiazhe,Pang, Siping,Sun, Chenghui,Yan, Zhiyuan,Yu, Zongbao
-
-
- Method for reducing aromatic nitro into arylamine
-
The invention relates to a method for reducing aromatic nitro to arylamine. The method comprises the following steps: (1) taking an aromatic nitro compound as a raw material, water as a hydrogen source, a palladium compound, cheap and easy to obtain, as a catalyst and tetrahydroxydiboron as an additive to reduce nitro to obtain a product; (2) taking the aromatic nitro compound as the raw material, a copper salt, cheap and easy to obtain, as the catalyst, the tetrahydroxydiboron as the additive to reduce the nitro to obtain a product; and (3) taking the aromatic nitro compound as the raw material, water as the hydrogen source, and the tetrahydroxydiboron as the additive, without needing a metal catalyst, to reduce the nitro to obtain a product. A preparation method for the arylamine, which is provided by the invention, is mild in reaction condition, low in costs, environment-friendly, high in yield, and suitable for industrial production.
- -
-
Paragraph 0093-0096
(2020/07/15)
-
- The immobilized Cu nanoparticles on magnetic montmorillonite (MMT?Fe3O4?Cu): As an efficient and reusable nanocatalyst for reduction and reductive-acetylation of nitroarenes with NaBH4
-
In this study, the immobilization of copper nanoparticles on superparamagnetic montmorillonite, MMT?Fe3O4?Cu, was studied. Magnetically nanoparticles (MNPs) of iron oxide (Fe3O4) were primarily prepared by a chemical co-precipitation method. Next, the prepared Fe3O4 MNPs were intercalated within the interlamellar spaces and external surface of sodium-exchanged montmorillonite. Finally, Cu NPs were immobilized on magnetic montmorillonite by a simply mixing of an aqueous solution of CuCl2·2H2O with MMT?Fe3O4 followed by the reduction with NaBH4. Characterization of MMT?Fe3O4 clay system represented that through the immobilization of Fe3O4 MNPs, disordered-layers structure of MMT was easily reorganized to an ordered-layers arrangement. The synthesized composite systems were characterized using FT-IR, SEM, EDX, XRD, VSM, BET and ICP-OES analyses. SEM analysis exhibited that dispersion of Cu NPs, with the size distribution of 15–25 nm, on the surface of magnetic clay was taken place perfectly. BET surface analysis indicated that after the immobilization of Fe3O4 and Cu species, the surface area and total pore volume of MMT?Fe3O4?Cu system was decreased. Next, the Cu-clay nanocomposite system showed a perfect catalytic activity towards reduction of nitroarenes to anilines as well as reductive-acetylation of nitroarenes to acetanilides using NaBH4 and Ac2O in water as a green and economic solvent. The copper magnetic clay catalyst can be easily separated from the reaction mixture by an external magnetic field and reused for six consecutive cycles without the significant loss of its catalytic activity.
- Zeynizadeh, Behzad,Rahmani, Soleiman,Tizhoush, Hengameh
-
-
- A polyamine dendritic polymer-copper complex: A reusable catalyst for the additive-free amination of aryl bromides, and iodides
-
A porphyrin-initiated amine-functionalized polyepichlorohydrin dendritic polymer (PPECH-Amine) was effectively synthesized, and its water-soluble copper complex (PPECH-Amine-Cu) was developed by treating it with copper acetate. PPECH-Amine and PPECH-Amine-Cu were characterised by different spectroscopic and microscopic techniques. PPECH-Amine-Cu was identified as a reusable catalyst for the amination of bromo- and iodo-benzene derivatives in aqueous media. Due to the presence of residual amino groups in the PPECH-Amine-Cu catalyst, the protocol does not need any additional base additive, as ammonia itself acts as a base and a coupling partner. Due to the good water-soluble nature of this catalyst, it can be easily separated and reused up to six reaction cycles without any loss in its activity.
- Avudaiappan,Palmurukan,Unnikrishnan,Sreekumar
-
p. 1477 - 1484
(2020/02/05)
-
- A new ligand for copper-catalyzed amination of aryl halides to primary(hetero)aryl amines
-
N,N′-Bis(3,5-dimethoxyphenyl)cyclopentane-1,1-dicarboxamide was found as a new ligand for copper-catalyzed amination of aryl iodides, bromides and chlorides to afford various primary (hetero)aryl amines. These reactions proceeded efficiently under mild conditions when inexpensive aqueous ammonia (28% NH3 in H2O) was used as the amino source.
- Chen, Dong,Dong, Xinrui,Jiang, Shang,Jiang, Sheng,Qiu, Yatao,Wu, Xiaoxing
-
supporting information
(2020/02/11)
-
- Shape-dependent reactivity and chemoselectivity of nanogold towards nitrophenol reduction in water
-
Although the catalytic activity of nano-gold surfaces for the reduction of nitro compounds has been known, the effect of their shape has been rarely evaluated. Here, the synthesis, characterization, and application of both gold nanoworms (GNW) and gold nanospheres (GNS) are described. Both GNW and GNS were characterized using SEM, TEM, UV–Vis, FTIR, and XPS spectroscopy. The catalytic efficiency of GNW with an average dimensions of 2 × 250 nm (D × L) towards the hydrogenation of nitrophenol, a pollutant present in industrial wastewater, is higher (TOF 3675 h?1) than that of spherical GNS (10 ± 1 nm), for which TOF is 1838 h?1 in water using NaBH4 as the reductant. The selectivity of 4-aminophenol is 100% for both GNS and GNW.
- Aziz, Md Abdul,Nafiu, Sodiq Adeyeye,Shaikh, M. Nasiruzzaman
-
-
- Highly efficient one-pot multi-directional selective hydrogenation and N-alkylation catalyzed by Ru/LDH under mild conditions
-
Atomic economy, non-toxicity, harmlessness and multidirectional selectivity advocated by green chemistry have increasingly become a hot and difficult research topic. Herein, we present a highly efficient, one-pot tandem and easy-to-operate method through which we could directly produce a broad range of multi-directional selective hydrogenated amines or N-alkyl aliphatic amines using aromatic nitro compounds as raw materials. Ru/LDH with characteristics of layered mesoporous structure, well dispersed small Ru nanoparticles and LDH stabilization to the Ru NPs was employed as the catalyst. It is remarkable that multi-directional superb chemoselectivity to aromatic amines, alicyclic amines as well as N-alkyl aliphatic amines could be achieved with excellent catalytic activity and recyclability by tuning reaction conditions over 5wt%Ru/LDH-2. Additionally, this catalytic system also exhibited attractive activity and multi-directional chemoselectivity in the hydrogenation of quinoline and its derivatives with solvents of different polarity. Chemoselectivity to 5,6,7,8-tetrahydroquinoline derivatives could reach as high as 95.6 %.
- Zhang, Sishi,Xu, Jie,Cheng, Hongmei,Zang, Cuicui,Sun, Bin,Jiang, Heyan,Bian, Fengxia
-
supporting information
(2020/03/30)
-
- EffectiveN-methylation of nitroarenes with methanol catalyzed by a functionalized NHC-based iridium catalyst: a green approach toN-methyl amines
-
Compound [IrBr(CO)2(κC-tBuImCH2PyCH2OMe)] featuring a flexible pyridine/OMe functionalized NHC ligand κ1C coordinated efficiently catalyzes the selectiveN-monomethylation of nitroarenes using methanol as both the reducing agent and the C1 source. A range of functionalized nitroarenes including heterocyclic or sterically hindered derivatives have been efficiently converted to the correspondingN-monomethyl amines in good yields at low catalyst loadings using sub-stoichiometric amounts of Cs2CO3as a base. Mechanistic investigations support a borrowing-hydrogen mechanism in which methanol acts as the hydrogen source and methylating agent. Further, the hydrogen transfer reduction of nitrobenzene to aniline under optimized reaction conditions should proceed through a direct mechanism involving nitrosobenzene andN-phenylhydroxylamine intermediates.
- González-Lainez, Miguel,Jiménez, M. Victoria,Passarelli, Vincenzo,Pérez-Torrente, Jesús J.
-
p. 3458 - 3467
(2020/06/17)
-
- Acceptorless dehydrogenative oxidation of primary alcohols to carboxylic acids and reduction of nitroarenes via hydrogen borrowing catalyzed by a novel nanomagnetic silver catalyst
-
A novel silver nano magnetic catalyst was devised for dehydrogenative oxidation of aromatic and aliphatic alcohols to the corresponding acid with water as the sole oxygen source and hydrogen gas as the only by-product. The designed catalytic system advantages from easy recovery of magnetic materials i.e. magnetic decantation, being economically viable and environmentally friendly. Furthermore, the catalytic reaction is able to reduce aryl nitro compounds in the absence of any reducing agent.
- Yazdani, Elahe,Heydari, Akbar
-
supporting information
(2020/08/14)
-
- Pd-Pt/modified GO as an efficient and selective heterogeneous catalyst for the reduction of nitroaromatic compounds to amino aromatic compounds by the hydrogen source
-
In this work, different nitroaromatic compounds were successfully reduced to their corresponding aromatic amines with excellent conversion and selectivity in methanol at 50?°C by using Pd-Pt nanoparticles immobilized on the modified grapheme oxide (m-GO) and hydrogen as the reducing source. The catalytic efficiency of Pd and Pd-Pt loading on the modified GO was investigated for the reduction of various nitroaromatic compounds, and the Pd-Pt/m-GO system demonstrated the highest conversion and selectivity. The catalyst was characterized by different techniques including FT-IR, Raman, UV–Vis, XRD, BET, XPS, FESEM, EDS, and TEM. The metal nanoparticles with the size of less than 10?nm were uniformly distributed on the m-GO. The catalyst could be reused at least five times without losing activity, showing the stability of the catalyst structure. Finally, the efficiency of the prepared catalyst was compared with Pd-Pt/AC, and Pd-Pt/GO catalysts.
- Salahshournia, Hossein,Ghiaci, Mehran
-
-
- Hydrogenation of Functionalized Nitroarenes Catalyzed by Single-Phase Pyrite FeS2 Nanoparticles on N,S-Codoped Porous Carbon
-
Catalytic hydrogenation of nitroarenes is an industrially very important and environmentally friendly process for the production of anilines; however, highly chemoselective reduction of nitroarenes decorated with one or more reducible groups in a nitroarene molecule remains a challenge. Herein, a novel hybrid non-noble iron-based nanocatalyst (named as FeS2/NSC) was developed, which was prepared from biomass as C and N source together with inexpensive Fe(NO3)3 as Fe source through high-temperature pyrolysis in a straightforward and cost-effective procedure. Comprehensive characterization revealed that single-phase pyrite FeS2 nanoparticles with precisely defined composition and uniform size were homogeneously dispersed on N,S-codoped porous carbon with large specific surface area, hierarchical porous channels, and high pore volume. The resultant catalyst FeS2/NSC demonstrated good catalytic activity for hydrogenation of functionalized nitroarenes with good tolerance of various functional groups in water as a sustainable and green solvent. Compared with bulk pyrite FeS2 and other non-noble metal-based heterogeneous catalysts reported in the literature, a remarkably enhanced activity was observed under mild reaction conditions. More importantly, FeS2/NSC displayed exclusive chemoselectivity for the reduction of nitro groups for nitroarenes bearing varying readily reducible groups.
- Duan, Yanan,Dong, Xiaosu,Song, Tao,Wang, Zhaozhan,Xiao, Jianliang,Yuan, Youzhu,Yang, Yong
-
-
- Colloid and Nanosized Catalysts in Organic Synthesis: XXI. Reduction of Nitroarenes Catalyzed by Immobilized Nickel Nanoparticles
-
It has been found that nickel nanoparticles on NaX zeolite, γ-alumina, activated carbon, or magnesium oxide support catalyze the reduction of nitrobenzene and its homologs affording aniline and its derivatives in high yield. The effect of the substrate on
- Mokhov,Popov, Yu. V.,Nebykov,Nishchik,Shcherbakova,Zotov, Yu. L.
-
p. 1549 - 1553
(2019/10/14)
-
- Superfine CoNi alloy embedded in Al2O3 nanosheets for efficient tandem catalytic reduction of nitroaromatic compounds by ammonia borane
-
Aromatic amino compounds are important and universally used chemical intermediates in a wide range of industrial fields. Thus, their production with high efficiency and selectivity under ambient conditions is expected and demanded in modern industry. Herein, a series of superfine CoNi alloy nanoparticles embedded in Al2O3 nanosheet (CoxNi1-x/Al2O3, where x represents the content of Co in the precursor) catalysts was fabricated from CoNiAl-LDH and used to catalyze the tandem dehydrogenation of ammonia borane (AB) and hydrogenation of nitroaromatics to the corresponding amines. Systematic experiments indicate that the composition, size, morphology and catalytic performance of the CoxNi1-x/Al2O3 catalysts can be easily controlled by changing the content of Ni in the CoNiAl-LDH precursor. Particularly, Co0.67Ni0.33/Al2O3 exhibited the best tandem catalytic performance among the six samples. This as-prepared catalyst not only showed a moderate turn-over-frequency value (TOF: 34.5 molH2 molCo0.67Ni0.33-1 min-1 at 298 K without base or additives) and relatively low activation energy (32.4 kJ mol-1) for the dehydrogenation of AB, but also superior catalytic activity (conversion yield reaching up to 100%) and selectivity (>99%) for the tandem reductive transformation of in excess of sixteen types of nitroaromatics to aromatic amines. Density functional theory (DFT) calculations suggest that the construction of the CoNi alloy optimized the electronic structure with respect to the pure component, promoting its activity for AB hydrolysis and nitroaromatics hydrogenation. Finally, the catalyst could be easily recycled using a magnet due to the magnetic properties of the Co0.67Ni0.33 alloy.
- Cheng, Sihang,Liu, Yanchun,Zhao, Yingnan,Zhao, Xinyu,Lang, Zhongling,Tan, Huaqiao,Qiu, Tianyu,Wang, Yonghui
-
p. 17499 - 17506
(2019/12/23)
-
- Hydrogenation of nitroarenes to anilines in a flow reactor using polystyrene supported rhodium in a catalyst-cartridge (Cart-Rh@PS)
-
The present methodology described the chemo-selective hydrogenation of various nitroarenes in a flow reactor under polystyrene supported rhodium in a catalyst-cartridge (Cart-Rh@PS) as a heterogeneous nano-catalyst. The polystyrene supported Rh (Rh@PS) nanoparticles (NPs) were prepared by following our earlier reported protocol and packed inside the catalyst-cartridge (Cat-Cart) to obtain Cart-Rh@PS, which is compatible with ThalesNano's H-Cube Pro flow system. The advantages of the prepacked catalyst Cart-Rh@PS are as follows: no need for catalyst activation up to 12 runs, negligible metal leaching detected by ICP-AES analysis and significantly less back pressure generated under the flow conditions. The same catalyst, Cart-Rh@PS, was also effective up to a 1 gram scale for the reduction of nitroarenes and reusable for successive runs. The hydrogenation in the flow reactor is a greener approach for the reduction of nitroarenes to their corresponding anilines in high yields.
- Sharma, Saurabh,Yamini,Das, Pralay
-
supporting information
p. 1764 - 1769
(2019/01/28)
-
- The immobilized Ni(II)-thiourea complex on silica-layered copper ferrite: A novel and reusable nanocatalyst for one-pot reductive-acetylation of nitroarenes
-
In this study, magnetically nanoparticles of CuFe2O4@SiO2@PTMS@Tu@Ni(II) as novel and reusable catalyst were prepared. Synthesis of the Ni (II)-nanocatalyst was carried out through the complexation of Ni(OAc)2·4H2O with the immobilized thiourea on silica-layered CuFe2O4. The prepared nanocomposite system was then characterized using SEM, EDX, XRD, VSM, ICP-OES, Raman, UV–Vis and FT-IR analyses. Catalytic activity of the Ni(II)-CuFe2O4 system was investigated towards rapid reduction of aromatic nitro compounds to arylamines with sodium borohydride as well as one-pot reductive-acetylation of nitroarenes to acetanilides with NaBH4/Ac2O system without the isolation of intermediate arylamines. All reactions were carried out in H2O within 3–7?min to afford the products arylamines/acetanilides in high to excellent yields. Reusability of the Ni(II)-nanocatalyst was examined for seven consecutive cycles without the significant loss of the catalytic activity.
- Zeynizadeh, Behzad,Shokri, Zahra,Hasanpour Galehban, Morteza
-
-
- Au@zirconium-phosphonate nanoparticles as an effective catalytic system for the chemoselective and switchable reduction of nitroarenes
-
In the present paper, a novel inorganic-organic layered material, a zirconium phosphate aminoethyl phosphonate, ZP(AEP), bearing aminoethyl groups on the layer surface, was used to immobilize AuNPs by a two-step procedure. The gold-based catalyst, Au1@ZP(AEP), containing 1 wt% Au, was characterized in terms of physico-chemical properties and TEM analysis revealed that the AuNPs have a spherical shape and an average size of 7.8 (±2.4) nm. Au1@ZP(AEP) proved its high efficiency for the chemoselective reduction of nitroarenes under mild conditions. Both batch and flow condition protocols have been defined. The catalytic system has been proven to be able to easily switch chemoselectivity allowing the control of the reduction of a series of nitroaromatics towards their corresponding azoxyarenes (2a-k) or anilines (2a-l) in 96% EtOH or abs EtOH, respectively, by using NaBH4 as a reducing agent, in good to excellent yields. Recovery and reuse of the catalytic system has been investigated proving the benefits of the flow approach.
- Ferlin, Francesco,Cappelletti, Matteo,Vivani, Riccardo,Pica, Monica,Piermatti, Oriana,Vaccaro, Luigi
-
p. 614 - 626
(2019/02/13)
-
- A novel approach towards chemoselective reduction of nitro to amine
-
Chemo selective reduction of a wide range of aromatic nitro compound has been performed by using inexpensive Zn powder and CuSO4 system in water medium at room temperature. This system has high tolerance to other highly reducible groups present in nitro substance along with high conversation and selectivity. This chemo-selective reduction also provides a facile root for the synthesis of other industrially important fine chemicals or biologically important compounds where other highly reducible groups are present in close proximity to the targeted nitro groups.
- Dasgupta, Hridoydip Ranjan,Mukherjee, Suvodip,Ghosh, Pranab
-
supporting information
(2019/08/13)
-
- Sustainable Protocol for the Reduction of Nitroarenes by Heterogeneous Au@SBA-15 with NaBH4 under Flow Conditions
-
A gold-incorporated SBA-15 catalyst was prepared by a solvent-free ball-milling approach. The catalyst showed high reactivity and selectivity in the reduction of a variety of nitroarenes to anilines operating in absolute EtOH with NaBH4 as reducing agent. The catalyst was reused in batch conditions over five consecutive runs without any losses of activity or selectivity. Considering the high chemical stability and reusability of the catalytic system, a continuous-flow protocol was also investigated and defined to minimize the generation of waste and optimize the continuous reuse of the catalyst. Benefits of flow conditions were proven by turnover numbers that increased from 47.5 to 1902 and also by the minimization of both leaching (9.5 vs. 1 ppm) and E-factor values (8 vs. 23 in batch).
- Ferlin, Francesco,Giannoni, Tommaso,Zuliani, Alessio,Piermatti, Oriana,Luque, Rafael,Vaccaro, Luigi
-
p. 3178 - 3184
(2019/02/19)
-
- Cobalt nanoparticles anchoring on nitrogen doped carbon with excellent performances for transfer hydrogenation of nitrocompounds to primary amines and N-substituted formamides with formic acid
-
Cobalt nanoparticles anchoring on nitrogen doped carbon derived from pyrolysis of a cobalt complex and chitosan were developed for reduction of nitrocompounds with neat formic acid to their corresponding amines or N-substituted formamides by switch of solvents. Characterization results revealed that most of the nitrogen atoms are present as graphitic N and pyridinic N as anchoring sites, and the cobalt nanoparticles are wrapped by nitrogen doped carbon layers, endowing the catalyst with excellent activity and superior reusability.
- Zhang, Yuecheng,Cao, Pengwei,Zhang, Hong-Yu,Yin, Guohui,Zhao, Jiquan
-
-
- Selective Reduction of Nitroarenes Catalyzed by Sustainable and Reusable DNA-supported Nickel Nanoparticles in Water at Room Temperature
-
Abstract: In this research, a novel, biodegradable and environmentally friendly catalyst composed of nickel nanoparticles supported on DNA was prepared and fully characterized by Fourier transform infrared spectroscopy, high resolution transmission electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, UV–vis spectroscopy, inductively coupled plasma optical emission spectroscopy, and elemental analysis. The catalyst exhibited remarkable catalytic activity and chemoselectivity for the reduction of various substituted nitroarenes with sodium borohydride (NaBH4) as the source of inexpensive hydride in water at room temperature. High turnover frequency and selectivity were observed for the reduction of all tested substrates. Interestingly, the catalyst could be recovered conveniently for multiple recycling reactions with sustained activity. Furthermore, nearly no nickel species was leached out from the catalyst during the course of reaction, proving the true heterogeneity in the present catalytic protocol. Graphical Abstract: The reduction of various nitroaromatic compounds into their corresponding amines is achieved by DNA supported nickel nanoparticles with the sodium borohydride as the reducing agent in water at room temperature. [Figure not available: see fulltext.].
- Niakan, Mahsa,Asadi, Zahra
-
-
- Catalytic hydrogenation of carbonyl and nitro compounds using an [: N, O] -chelate half-sandwich ruthenium catalyst
-
A series of N,O-chelate half-sandwich ruthenium complexes for both carbonyl and nitro compound hydrogenation have been synthesized based on β-ketoamino ligands. All complexes exhibited high activity for the catalytic hydrogenation of a series of ketones and nitroarenes with molecular H2 as the reducing reagent in aqueous medium. Consequently, the catalytic system showed the catalytic TON values of 950 for 1-phenylethanol in acetophenone hydrogenation and 1960 for 1-chloro-4-nitrobenzene in p-chloroaniline hydrogenation. Good catalytic activity was displayed for various kinds of substrates with either electron-donating or electron-withdrawing groups. The neutral ruthenium complexes 1-4 were fully characterized using NMR, IR, and elemental analysis. Molecular structures of complexes 2 and 4 were further confirmed using single-crystal X-ray diffraction analysis.
- Yao, Zi-Jian,Zhu, Jing-Wei,Lin, Nan,Qiao, Xin-Chao,Deng, Wei
-
p. 7158 - 7166
(2019/06/13)
-
- Eco-friendly hydrogenation of aryl azides to primary amines on graphene oxide-decorated bimetallic Rh-Pt nanoparticles (RhPt@GO NPs)
-
Graphene oxide-supported rhodium/platinum (Rh-Pt) nanoparticles (Rh-Pt@GO NPs) are a promising catalyst for the reduction of aryl azides to primary amines. Rh-Pt@GO NPs have been produced by the microwave-assisted sonochemical method. This catalyst showed superior catalytic activity to afford quantitative yields of primary amines under an extremely mild condition in the presence of sodium borohydride. The synthesized novel catalyst was easily recovered by centrifugation and reused without loss of its catalytic activity. The spectroscopic analyses of the RhPt@GO NPs indicated the formation of highly crystalline, monodisperse, and colloidally stable RhPt@GO NPs.
- Kilbas, Benan,Kara, Belguzar Yasemin
-
-
- Copper(ii)-catalyzed c-n coupling of aryl halides and n-nucleophiles promoted by quebrachitol or diethylene glycol
-
Herein, we report the natural ligand quebrachitol (QCT) as a promoter for a Cu(II) catalyst, which is highly effective for N-Arylation of various amines and related aryl halides. A series of diarylamine derivatives were obtained in high yields by using diethylene glycol (DEG) as both ligand and solvent. The C-N coupling reactions proceed under mild conditions and exhibit good functional group tolerance.
- Chen, Guoliang,Chen, Yuanguang,Du, Fangyu,Fu, Yang,Wu, Ying,Zhou, Qifan
-
supporting information
p. 2161 - 2168
(2019/11/25)
-
- Direct conversion of phenols into primary anilines with hydrazine catalyzed by palladium
-
Primary anilines are essential building blocks to synthesize various pharmaceuticals, agrochemicals, pigments, electronic materials, and others. To date, the syntheses of primary anilines mostly rely on the reduction of nitroarenes or the transition-metal-catalyzed Ullmann, Buchwald-Hartwig and Chan-Lam cross-coupling reactions with ammonia, in which non-renewable petroleum-based chemicals are typically used as feedstocks via multiple step syntheses. A long-standing scientific challenge is to synthesize various primary anilines directly from renewable sources. Herein, we report a general method to directly convert a broad range of phenols into the corresponding primary anilines with the cheap and widely available hydrazine as both amine and hydride sources with simple Pd/C as the catalyst.
- Qiu, Zihang,Lv, Leiyang,Li, Jianbin,Li, Chen-Chen,Li, Chao-Jun
-
p. 4775 - 4781
(2019/05/16)
-
- Selective Synthesis of Primary Anilines from NH3 and Cyclohexanones by Utilizing Preferential Adsorption of Styrene on the Pd Nanoparticle Surface
-
Dehydrogenative aromatization is one of the attractive alternative methods for directly synthesizing primary anilines from NH3 and cyclohexanones. However, the selective synthesis of primary anilines is quite difficult because the desired primary aniline products and the cyclohexanone substrates readily undergo condensation affording the corresponding imines (i.e., N-cyclohexylidene-anilines), followed by hydrogenation to produce N-cyclohexylanilines as the major products. In this study, primary anilines were selectively synthesized in the presence of supported Pd nanoparticle catalysts (e.g., Pd/HAP, HAP=hydroxyapatite, Ca10(PO4)6(OH)2) by utilizing competitive adsorption unique to heterogeneous catalysis; in other words, when styrene was used as a hydrogen acceptor, which preferentially adsorbs on the Pd nanoparticle surface in the presence of N-cyclohexylidene-anilines, various structurally diverse primary anilines were selectively synthesized from readily accessible NH3 and cyclohexanones. The Pd/HAP catalyst was reused several times though its catalytic performance gradually declined.
- Koizumi, Yu,Jin, Xiongjie,Yatabe, Takafumi,Miyazaki, Ray,Hasegawa, Jun-ya,Nozaki, Kyoko,Mizuno, Noritaka,Yamaguchi, Kazuya
-
supporting information
p. 10893 - 10897
(2019/07/12)
-
- From alkylarenes to anilines via site-directed carbon–carbon amination
-
Anilines are fundamental motifs in various chemical contexts, and are widely used in the industrial production of fine chemicals, polymers, agrochemicals and pharmaceuticals. A recent development for the synthesis of anilines uses the primary amination of C–H bonds in electron-rich arenes. However, there are limitations to this strategy: the amination of electron-deficient arenes remains a challenging task and the amination of electron-rich arenes has a limited control over regioselectivity—the formation of meta-aminated products is especially difficult. Here we report a site-directed C–C bond primary amination of simple and readily available alkylarenes or benzyl alcohols for the direct and efficient preparation of anilines. This chemistry involves a novel C–C bond transformation and offers a versatile protocol for the synthesis of substituted anilines. The use of O2 as an environmentally benign oxidant is demonstrated, and studies on model compounds suggest that this method may also be used for the depolymerization of lignin.
- Liu, Jianzhong,Qiu, Xu,Huang, Xiaoqiang,Luo, Xiao,Zhang, Cheng,Wei, Jialiang,Pan, Jun,Liang, Yujie,Zhu, Yuchao,Qin, Qixue,Song, Song,Jiao, Ning
-
-
- Aromatic amine compound synthesis method
-
The invention discloses an aromatic amine compound synthesis method which is characterized in that the method is implemented according to any of two methods. The first method includes the steps: mixing an alkyl aromatic compound with a general formula (I) and a nitrogen-containing compound with a general formula (II); performing reaction on mixture under an oxidizing agent and an organic solvent to obtain an aromatic amine compound with a general formula (III). The second method includes the steps: mixing an aromatic alcohol derivative with a general formula (I') and the nitrogen-containing compound with the general formula (II); performing reaction on mixture under an acid additive and an organic solvent to prepare the aromatic amine compound with the general formula (III). According to the method, a lot of alkyl aromatic compounds or aromatic alcohol derivatives firstly serve as raw materials, and the raw materials are reacted to generate the aromatic amine compound without the action of metal catalysis. Compared with a traditional synthesis method, the synthesis method has the advantages that the method is high in yield and simple in condition, waste discharging amount is less,metal participation is omitted, a reaction device is simple, industrial production is easily achieved and the like. The method has a wide application prospect.
- -
-
Paragraph 0149-0151
(2019/01/23)
-
- Development and Scale-up of Continuous Electrocatalytic Hydrogenation of Functionalized Nitro Arenes, Nitriles, and Unsaturated Aldehydes
-
Electrolysis flow reactors based on the filter-press architecture of redox flow batteries have proven to be effective and scalable toward the production of commercially relevant, pharmaceutical quantities of anilines (>500 kg/year) from halogen-, hydroxyl-, and carbonyl-substituted nitroarenes. Turbulent flow through the carbon felts on which the catalysts were supported facilitated scaling toward production levels because it conferred on the reactors scale-independent, plug flow-like residence time distributions and high mass transfer coefficients. Equipping the cells with microreference electrodes made it possible to transfer reaction conditions first developed in batch systems to the continuous flow reactors. The catalysts prepared by incipient wetness impregnation of metal salts into lightly oxidized carbon felt supports were readily generalizable.
- Egbert, Jonathan D.,Thomsen, Edwin C.,O'Neill-Slawecki, Stacy A.,Mans, Douglas M.,Leitch, David C.,Edwards, Lee J.,Wade, Charles E.,Weber, Robert S.
-
p. 1803 - 1812
(2019/08/15)
-
- Palladium doping of In2O3 towards a general and selective catalytic hydrogenation of amides to amines and alcohols
-
Herein, the first general heterogeneous catalytic protocol for the hydrogenation of primary, secondary and tertiary amides to their corresponding amines and alcohols is described. Advantageously, this catalytic protocol works under additive-free conditions and is compatible with the presence of aromatic rings, which are fully retained in the final products. This hydrogenative C-N bond cleavage methodology is catalyzed by a Pd-doped In2O3 catalyst prepared by a microwave hydrothermal-assisted method followed by calcination. This catalyst displays highly dispersed Pd2+ ionic species in the oxide matrix of In2O3 that have appeared to be essential for its high catalytic performance.
- Sorribes, Iván,Lemos, Samantha C. S.,Martín, Santiago,Mayoral, Alvaro,Lima, Renata C.,Andrés, Juan
-
p. 6965 - 6976
(2019/12/26)
-